District Magistrate Tender

Water Bound Macadam Base Course Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam Specification including spreading in uniform thickness hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and booming requisite type of screening / blinding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per clause 404 of specifications for Road & Bridge Works of MORT&H (5th Revision) (i ) Grading –I Aggregate ( 63 mm to 45 mm ) using Stone screening Type B (11.2 mm)ith local sand.

(ii ) Grading –II Aggregate ( 53 mm to 22.4 mm ) using Stone screening Type B (11.2 mm)

Providing and applying bituminous primer coat with cationic bituminous emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per clause 502 of specifications for Road & Bridge Works of MORT&H (5th Revision)

Providing and applying Tack coat with cationic bituminous emulsion of approved grade conforming to IS: 8887-1978 on prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of bitumen emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per clause 503 of specifications for Road & bridge Works of MoRT&H (5th Revision)

Open-Graded Premix Surfacing using Bituminous ( Viscosity Grade Paving Bitumen / Modified Bitumen)Binder and Mobile Hot Mix Plant (Light Duty ) Providing, laying and rolling of Open- graded premix surfacing of 20 mm thickness composed of 13.2 mm ( @ 0.018 m3 / m2 )and 11.2 mm (@0.009 m3 / m2 ) size stone aggregate including thoroughly cleaning of the surface, screening, cleaning and preheating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut- back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant ( Light Duty ) and thoroughly rolling with smooth wheeler roller 8 – 10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, pre-heating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant ( Light Duty ) and other Machinery and cost of fuel and lubricants etc. omplete to be followed by seal coat of either Type A or B as per Technical Specification Clause 508 for Rural Roads of MORD

Providing and laying premixed seal coat (type B) with approved quality grit @ 0.6 m3 per 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat , including heating and mixing cleaned grit ( 100 % passing through 2.36 mm sieve and retained on 180 micron sieve ) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means , brushing the surface , if necessary, to ensure uniformly, followed by rolling with power roller including the cost and carriage of binder and aggregates , cost of heating the binder and aggregates and all other incidental charges , cost of fuel and lubricants , including hire charges tools & plants equired for construction and quality control complete as per clause 503 of specifications for Road & Bridge Works of MoRT&H (5th Revision)

Providing and fixing concrete Signboard as per I R C. specification of size 900 X 750 X 37 mm thick made with R. C .C. (1:1.5:3) with pakur variety stone chips reinforced with double layer IRC. fabric ( 75 X 75 mm mesh ) and fixed with necessary nuts & bolts on two RC. precast post 100 mm X 150 mm of high 2.65 m of which top 750 mm is of section 100 mm X 13 mm and 1.90 metre above G. L. & 0.75 metre below G. L. including digging hole, repacking the same with cement concrete (1:3:6 ) with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc.as per direction of the Engineer-in-charge ( The rate is inclusive of cost of reinforcement concrete, shuttering, nuts & bolts, washer etc. complete)

ADD GST @ 18%

ADD LABOUR WELFARE CESS @ 1%