District Magistrate Tender

Ref.PWD(WB)/BUILDING WORKS/PG-302-ITEM-18 Cost of Stone boulder 150 mm size delivered and stacked at site

Ref.PWD(WB)/BUILDING WORKS/PG-34-ITEM-22B.a Cement concrete with graded stone ballast (40mm size excluding shuttering). In ground floor. (B) With N.B. Variety stone metal. (a) 1:3:6 proportion

Ref.PWD(WB)/BUILDING WORKS/PG-25-ITEM-6 (b) Controlled Cement concrete with well graded stone chips (20 mm nominal size ) excluding shuttering and reinforcement with complete design of concrete as per ISI-456 and relevant special publications submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in-charge. Consumption of cement will not be less then 300kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basic of preliminary test & job mix formula In Ground floor & foundation.[using concrete mixture]M 25 Grade.

Ref.PWD(WB)/BUILDING WORKS/PG-43-ITEM-40 Reinforcement for reinforced concreate work in all sorts of structures including ditribution bars, stirrups, binders, etc. initial straightening and removal of loose rust (if necessary ), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.For works in foundation, basement and upto roof of ground floor/ upto 4m. (Tor steel/ Mild steel) (Lead upto 150Km). JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL.

Ref.PWD(WB)/BUILDING WORKS/PG-42-ITEM-36.a Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Ref.PWD(WB)/BUILDING WORKS/PG-16-ITEM 125 mm th Brick work with 1st class bricks in cement morter (1:4)

Ref.PWD(WB)/BUILDING WORKS/PG-189-ITEM-1 Plaster (to wall, floor, ceiling, etc.) with sand and cement morter ( including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / stagging where necessary (Ground floor) [Excluding cost of chipping over concrete surface] (iii) With 1:4 cement moratr(a) 15mm thick inside plaster with (1:4)

Ref.PWD(WB)/BUILDING WORKS/PG-114-ITEM-1 Wood work in door & window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt, Hinges and M.S. clamps. (The quantum should be corrected upto three decimals). (d) Sal: Local

Ref.PWD(WB)/BUILDING WORKS/PG-117-ITEM-1 Panel shutters of door & window, as per design (each panel consisting of single plank without joints) , including fitting and fixing the same in the position but excluding the cost of hinge and other fittings. (iii) 35mm thick shutters with 12mm thick panel of size 30 to 45 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.. Opening size (1.2 m x 2.13 m with frame Size 95 mm x 70mm).

Ref.PWD(WB)/BUILDING WORKS/PG-106-ITEM-19 (a) Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G. of approved type, steel latche section 75 mm.wide, fitted with coil wire spring to necessitate the fitting of required No. of C.I. pulleys on heavy type solid drawn seamless steel tube complete with locking arrangement both inside and ouside specially built up side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.(Measurement will be made on the area of opening covered by the rolling shutter corrected, upto 2 decimal.)2. Payment of painting to be separately.

Ref.PWD(WB)/BUILDING WORKS/PG-23-ITEM-45, Rubble masonry in cement (1:4) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site

Ref.PWD(WB)/BUILDING WORKS/PG-194-ITEM-1 White washing including cleaning and smoothening surface thoroughly :All floors:(b) Two coats (to be done on specific instruction.).

Ref.PWD(WB)/BUILDING WORKS/PG-196-ITEM-8, Applying exterior grade Acrylic primer of approved quality and brand on plaster or concrete surface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor:.

Ref.PWD(WB)/BUILDING WORKS/PG-100-ITEM-2, M.S. structural works in roof trusses with tubular sections conforming to IS: 806- 1957 & IS: 1161- 1958 connected to one another with bracket,gusset,cleats as per design, direction of Engineer-In-Charge complete including cutting to requisite size. fabrication with necessary metal arc welding conforming to IS: 816- 1956 & IS: 9595 using electrodes of approved make and brand conforming to IS: 814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section. consumables such as electrodes, gas and hire charges of all tools and plants and labour required for the work including all incidental charges such as electricity charges, labour insurance charges etc.(Payment to be made on the basis of calculated weight of structural tubular members as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with the weight of finished structural members. The rates are considere (i) For trusses spanning up to 12.00 m.

Ref.PWD(WB)/BUILDING WORKS/PG-81-ITEM-9, Galvanized corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugaion minimum side lap. ( payment to be made on area of finished work). (GCI sheet to be supplied by contractor). (b) With 0.63 mm.thick sheet.

Ref.PWD(WB)/BUILDING WORKS/PG-81-ITEM-10, Galvanised iron sheet ridging fitted with necessary bolt, screws, washers etc complete. (225 mm end lapping). b) With 0.63 mm.thick sheet.

Ref.PWD(WB)/BUILDING WORKS/PG-82-ITEM-11, Galvanized iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm.M.S.flat bar clamps bent to design, bolts. Nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping). (a) 225 mm. wide gutter.

Ref.PWD(WB)/BUILDING WORKS/PG-213-ITEM-21, Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. and cutting trenches in any soil through masoury concrete structures etc. if necessary and mending good damages including jointing with jointing materials (Spun yarn, valamoid / bitumen/M.seal etc) complete. (ii) 110mm Dia.

Ref.PWD(WB)/BUILDING WORKS/PG-37-ITEM-6, Supplying PVC water storage tank of approved quality with closed top weith lid (Black) - Multilayer. 1000 ltr capacity