District Magistrate Tender

Supplying, fitting and fixing sign board (1200mmx 900 mm) made up with two nos 40 mm dia GI pipe post 3.35 m long each(non TATA light quality ) fixing with cement Concrete (1:3:6) measuring 300 mm x 300 mmx 600 mm including excavation of earth (300 mm x 300 mmx 900 mm) and sign board of size 1200 mm x900mm of MS angles (25mm x 25 mm x 6 mm) frame and flats (25 mm x 6mm) as intermediate vertical stiffeners and covering with 1.5 mm thick MS sheet fixing with nut bolts(4 nos) including painting two cvoats with synthetic enamel paint over a coat of priming as directed by the Engineer-in-charge.

Earthwork in excavation from borrow pits (land owned / arranged by the Department) and depositing in layers of 250 mm. including breaking clods in embankment works and to fill up back of abutments, depressions and ruts with an initial lead up to 50 m and initial lift up to 1.5 m making bunds at top as directed dressing complete. (Borrow pit measurement) - Extra for carriage of all kinds of soil for each additional unit lead of 50 m (or part thereof) including loading and unloading. (Borrow pit measurement) - Beyond 500 m & up to total lead of 1000 m - For compensation for earth for land owned and arranged by Contractor add Rs. 25.00 per m³ extra over rate of E/W for land owned / arranged by the Department & for royalty charge on earth @ Rs. 18.00 per m³ as per Govt. notification which will be paid on production of necessary documents in support of payment made towards the royalties. During initial payment of bill, a deduction @ Rs. 18.00 per m³ may be made.

Dressing and chilchalling Road flanks including cutting and filling with earth up to 150 mm average thickness finished with outward cross-grade of 1 in 30.

B. Maintenance of Earthen Shoulder (Stripping of Exces Soil): stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawing and Technical Specification clause 1903 for Rural Roads of MORD. (Average thickness 150 mm)

Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works. (d) M-20 Grade: (i) Using concrete mixer.

Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, cross-drain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. Where staging is not required.

Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed. (iii) 150mm diameter

Filling empty Cement bags with dry earth or sand, stitching the bag (cost of thread included) and carrying and placing them in position and all incidental charges complete including cost of earth and gunny bags.

Labour for driving Sal-bullah / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles - (ii) 150 mm dia

A. Maintenance of Earthen shoulder (filling with fresh selected soil) : Making up loss of material / irregularities on shoulders to the design level by adding fresh approved selected soil and compacting with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause 1903 for Rural Roads of MORD. (Average thickness 150 mm)

Fencing With Welded Steel Wire Fabric 75 mm x 50 mm - Providing 1.20 metre high fencing with angle iron posts 50 mm x 50 mm x 6 mm at 3 metre center to center with 0.40 metre embedded in M15 grade cement concrete, corner, end and every 10th post to be strutted, provided with welded steel wire fabric of 75 mm x 50 mm mesh or 75 mm x 25 mm mesh and fixed to iron posts by flat iron 50 x 5 mm and bolts etc. complete in all respects.

Coal tarring on wooden surfaces including cost of materials (b) Single coat

Labour for driving Sal-bullah / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles - (i) 100 mm diameter