District Magistrate Tender

Supplying and laying brick Khoa of ordinary bats of size (38 mmx 63 mm)of approved quality in 100 mm layer (loose) filling in gaps with small ones rammed and compact as directed true to level and grade.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with 3 mm neat cement finishing at top and including rounding off corners.

Ordinary Cement Concrete (mix 1 :1.5 :3) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, as per relevant IS codes.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.

Hire and labour charges for wooden shuttering with centring by 25 mm thick plank and proper R.C.C work to foundation, column, tie, beam, lintel, beam, saise, slab, roof, chajja projection etc.(Ground Floor) (a) 25 mm to 30 mm thick without Staging

(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge

Brick work with 1st class bricks in cement mortar (1:4) a) In foundation and plinth

Brick work with 1st class bricks in cement mortar (1:6) a) In Superstructure

125 mm. thick brick work with 1st class bricks in cement mortar (4:1)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding …... 20 mm thick plaster

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding …... 15 mm thick plaster

Neat Cement Punning about 1.5 mm average thick in wall,dado,window sills,floor,drain etc. in all floors I ground floor.

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.

M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.

White washing including cleaning and smoothening surface thoroughly.

Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly :

Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly :

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand smoothening surface by sand paparing etc. I,e,………..Using approved putty etc. 2 coat on wooden surface with other than ho-gloss of quality in ground floor.

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor)

Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping)

Supplying, fitting and fixing glass reinforced polyester translucent fiber glass sheet to match with GCI Corrugation as per IS: 12866 - 1989 in roof fitted and fixed with 10 mm dia "J" or "L" hook, bolts and nuts, limpet and bitumen washers and putty with 150mm end lap and one corrugation minimum side lap complete.

Galvanised or painted wind-tie made of M.S. flats, fitted and fixed complete including cost of necessary fittings.

Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised "C" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc.

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.

c) Bend 87.5 degree 110mm dia

GST @ 18%

Cess @ 1%