District Magistrate Tender

First class kiln burnt bricks in cement morter (6:1) including curing bricks,racking out joints,scaffolding etc. complete [ Rate from PWD SW schdule 2017 Page no-15 Item -8 (a) & 3rd corrigenda Sl. No. - 4(a), Page no.- 2] (A) Superstructure

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor [3rd corrigenda Sl.no-8,P-3]

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Including cost of chipping over concrete surface] C) 20 mm. Th. Sand cement plaster (6:1) to walls [ Rate from PWD SW schdule 2017 Page no-189 Item -1(i) © & 3rd corrigenda Sl. No. - 1, Page no.- 50]

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) In roof 0.5 mm thick sheet. [Item No. - 14(a) , Page No. - 83]

Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping) 450 mm lapping each way With 0.63 mm sheet . [ Rate from PWD SW schdule2017 Page 81 Item no -10 A) b)]

Synthetic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.. [ Rate from PWD SW schdule2017 Page 196 Item no -11]

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. i) For trusses spanning up to 12.00 m [Rate from PWD SW schdule 2017 Item No. - 2(i).,Page No. - 100 & 3rd corrigenda Sl.no-2,P-85 ]

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. [ Rate from PWD SW schdule 2017 Page No.-104 Item -13(a) ; 3rd Corri Page no-91, Sl. No-10] (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. [ Rate from PWD SW schdule2017 Page 200 Item no -1(a)]

Painting two coat on steel surface with synthetic enemel of approved make and brand including smoohtening surfaces by sand papering etc. including using of approved putty etc. on the surface if necessary [ Rate from PWD SW schdule2017 Page 200 Item no -2A(b)(ii)]

Adding for Electrification @ 10 % =

Adding GST @18%

Addding Labour Cess @1%