District Magistrate Tender

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and fitting joints with powdered earth or local sand.

Cement concrete work (1:3:6) with 30mm down shingles (graded) excluding shuttering. In ground floor & foundation

Ordinary cement concrete Mix-(3:1.5:1) M-20 with graded stone chips (20mm down) excluding shuttering & reinforcement, if any, in ground floor as per IS 456-2000. (b) River bazree In Ground Floor

Hire & Labour charges for shuttering with centering and necessary staging upto 4 m. (a) 25 mm to 30 mm th, Shuttering. Without staging. Below PL

(b) 25 mm. to 30 mm. th. Above PL

Reinforcement for reinforced concrete work in the all sorts of structure including distribution bars, stirrups, binders etc….

Brick work with 1st. Class bricks in cement morter (6:1) in foundation & plinth

125 mm. th. Brick work with 1st Class bricks in cement morter (4:1) in ground floor.

25 mm. Th. Damp proof course with cement concrete with stone chips (4:2:1) & admixture of water proofing…..Double chequered complete…

M.S. clamp for fixing door window frame made of flat bent bar… with stone chips (4:2:1) fitted & fixed complete as per direction. (a) 40 mm x 6 mm 200mm. Length

Iron butt hinges of approved quality fitted & fixed with steel screws, with ISI make. (a) 75 mm x 40 mm x 1.12mm

Iron door handle fitted af fixed complete ii) 125mm x 10 mm size

Iron Socket bolt of approved quality fitted & fixed complete (c) 225 mm long x 10 mm dia. Bolt

Iron hasp bolt of approved quality fitted & fixed complete…c) 300 mm long 16mm dia rod

Wood work in Door & window frame fitted & fixed complete including a protective coat of painting … Sal: Siliguri

Z- batten shutters of door & window as per design having ….including fitting & fixing shutter in position (a) Shutter with 25 mm . Th. planks, 19 mm th. Batten

Supplying fitting & fixing P.V.C door shutter of approved quality & shade in position the style & rail of the P.V.C door shutter will be made of rigid P.V.C multicavity hollow chamber…………..all other incidental charges complete. (b) 30 mm. thick shutter with 25 mm thick panel ( wall thickness 1.2 mm) and 60 mm width stiles & rails with lock rail 120 mm.

Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (ground floor) a) With (6:1) cement concrete ii) 20 mm thick plaster.

With (6:1) cement mortar 15 mm thick plaster.

Neat cement punning about 1.5mm thick in wall dado, window, sills, floor, drain etc.

Priming one coat to timber or plastered or steel surface, with ready mixed primer of approved quality, including smoothening surface bu sand papering etc. (a) Wooden Surface

(b) Steel surface-

Painting with best quality synthetic paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. a) On timber or Plaster surface with super gloss (With other than hi-gloss & white.)

(b) Steel surface-

MS or WI ornamental grill or approved design joints continuously welded with MS / WI flats and bars for windows, railing etc. fitted & fixed with necy. Screws and lugs in ground floor. (a/i) Grill weighting 10-16 kg/ sq.m

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) a) With 0.60 mm thick sheet

Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete. (225mm end lapping)

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the surface throughly……(iii) Two coats

Supplying, fitting & fixing best quality digital printed Ceramic tiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid overexisting hard ready surface) all complete as per direction of Engineer-in-charge. i) Coloured decorative

Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles. Cement of mortar & slurry will be supplied by the Department. Border concrete if necessary to be paid separately].

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (ii) 530 mm x 410 mm

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white 470mmX280mmX340mm vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm

Supplying Fitting & Fixing Squating plate with integral Flushing in white vitrious Chinaware of approved make……… i) 450 mm x 350 mm

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chipsover a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to insidewalls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as perdirection, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcementsupto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoilsafter work complete in all respect with all costs of labour and materials

Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thickR.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1)to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary,ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.(ii) For 20 users B) With Bazree (N.B Varity)

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.

Supplying Fitting & Fixing 'S' trap confirming to ISI specification. (B) 'S' Trap (ii) 100 mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (Dia) 40 mm. Elbow. (Bansal)

Supplying of high-density polythin strainer of app. Make with adepter confirming to I.S. specification. i) 40 mm dia.

Supply of G.I. pipes with socket ( TATA -Medium ) a) 40 mm dia.

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (i) 40 mm dia. boring etc

Supply of G.I. socket with I.S.I. mark. 40mm dia.

Supplying, fitting and fixing G.I. shoe.

Supplying, fitting and fixing popular maya pump no. 6 or similar. i) for 40 mm dia. tube well.

GST(18%)

LABOUR CESS(1%)