District Magistrate Tender

Ref.PWD(WB)/BUILDING WORKS/PG-302-ITEM-18 Cost of Stone boulder 150 mm size delivered and stacked at site

Ref.PWD(WB)/BUILDING WORKS/PG-34-ITEM-22B.a Cement concrete with graded stone ballast (40mm size excluding shuttering). In ground floor. (B) With N.B. Variety stone metal. (a) 1:3:6 proportion

Ref.PWD(WB)/BUILDING WORKS/PG-26-ITEM-10 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (b) River bazree

Ref.PWD(WB)/BUILDING WORKS/PG-42-ITEM-36.a Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Ref.PWD(WB)/BUILDING WORKS/PG-42-ITEM-36.f Hire & labour charges for shuttering for foundation concrete side shuttering for concrete floor ,roof , beam , lintels, column , slab etc. (f) 25 mm to 30 mm shuttering without staging in foundation.

Ref.PWD(WB)/BUILDING WORKS/PG-43-ITEM-40 Reinforcement for reinforced concreate work in all sorts of structures including ditribution bars, stirrups, binders, etc. initial straightening and removal of loose rust (if necessary ), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.For works in foundation, basement and upto roof of ground floor/ upto 4m. (Tor steel/ Mild steel) (Lead upto 150Km). JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL.

Ref.PWD(WB)/BUILDING WORKS/PG-23-ITEM-45.i Rubble masonry in cement (1:4) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site. (b) In Fine dressed work in Building. (i) In Ground Floor

Ref.PWD(WB)/BUILDING WORKS/PG-16-ITEM 125 mm th Brick work with 1st class bricks in cement morter (1:4)

Ref.PWD(WB)/BUILDING WORKS/PG-189-ITEM-1 Plaster (to wall, floor, ceiling, etc.) with sand and cement morter ( including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / stagging where necessary (Ground floor) [Excluding cost of chipping over concrete surface] (iii) With 1:4 cement moratr(a) 20mm thick inside plaster with (1:4)

Ref.PWD(WB)/BUILDING WORKS/PG-189-ITEM-1 Plaster (to wall, floor, ceiling, etc.) with sand and cement morter ( including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / stagg (b) 15mm thick outside plaster with (1:4)

Ref.PWD(WB)/BUILDING WORKS/PG-189-ITEM-1 Plaster (to wall, floor, ceiling, etc.) with sand and cement morter ( including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / stagg (c ) 10mm thick ceiling, floor plaster with (1:4)

Ref.PWD(WB)/BUILDING WORKS/PG-192-ITEM-15 Neat cement punning about 1.5 mm thick in wall dado, window sills floor drains etc.

Ref.PWD(WB)/BUILDING WORKS/PG-114-ITEM-1 Wood work in door & window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt, Hinges and M.S. clamps. (The quantum should be corrected upto three decimals). (d) Sal: Local

Ref.PWD(WB)/BUILDING WORKS/PG-117-ITEM-1 Panel shutters of door & window, as per design (each panel consisting of single plank without joints) , including fitting and fixing the same in the position but excluding the cost of hinge and other fittings. (iii) 35mm thick shutters with 12mm thick panel of size 30 to 45 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.. Opening size (1.2 m x 2.13 m with frame Size 95 mm x 70mm).

Ref.PWD(WB)/BUILDING WORKS/PG-107-ITEM-20, 3rd Corri & Add. P-93 Item-17 Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]

Ref.PWD(WB)/BUILDING WORKS/PG-205-ITEM-1 Supplying best Indian sheet glass panes set in putty and fitted and fixedwith nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m)

Ref.PWD(WB)/BUILDING WORKS/PG-140-ITEM-4 Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length

Ref.PWD(WB)/BUILDING WORKS/PG-140-ITEM-5 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vii) 100mm. X 58mm. X 1.90mm.

Ref.PWD(WB)/BUILDING WORKS/PG-141-ITEM-7 Iron catch hook of approved quality fitted and fixed to shutter and chowkat. (c) 10mm dia x 300mm long.

Ref.PWD(WB)/BUILDING WORKS/PG-141-ITEM-10 Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (b) 250mm long.

Ref.PWD(WB)/BUILDING WORKS/PG-40-ITEM-29 Supplying , fitting approved type of ventilator in position after cutting holes in walls, setting in cement morter, mending damages to wall and plaster and two coates of paint of approved band sand shade, Payment of mending two damages of wall & plaster & painting to be made seperately. R.C.C. ventilator of 20mm thick (upto 0.10 Sqm. area)

Ref.PWD(WB)/BUILDING WORKS/PG-213-ITEM-21 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (ii) 110 mm. Dia.

Ref.PWD(WB)/BUILDING WORKS/PG-64-ITEM-35 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor. With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cemen slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.

Ref.PWD(WB)/BUILDING WORKS/PG-196-ITEM-10 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Ref.PWD(WB)/BUILDING WORKS/PG-197-ITEM-15 Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. In Ground floor: (iii) Two coats.

Ref.PWD(WB)/BUILDING WORKS/PG-200-ITEM-1.A Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Ref.PWD(WB)/BUILDING WORKS/PG-200-ITEM-1.B Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Ref.PWD(WB)/BUILDING WORKS/PG-200-ITEM-2.A Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : a) On timber or plastered surface : With super gloos (hi-gloss) (iv) Two coats (with any shade except white)

Ref.PWD(WB)/BUILDING WORKS/PG-200-ITEM-2.B Painting with best quality cynthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss). (iv) Two coats (with any shade except white)

Ref.PWD(WB)/SANITARY & PLUMBING/PG-88-ITEM-3 Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.For 20 users. B) With Bazree (N.B Varity) (Other than SAIL/TATA/RINL)

Ref.PWD(WB)/SANITARY & PLUMBING/PG-79-ITEM-4 Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing)

Ref.PWD(WB)/BUILDING WORKS/PG-41-ITEM-1 Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.

Ref.PWD(WB)/BUILDING WORKS/PG-37-ITEM-6 Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. (b) 500 litre capacity

Added the cost for plumbing work (LS

Added GST @ 18%

Added the cost for plumbing work (LS