District Magistrate Tender

Taking out shutter of door andwindow, dismantlingby parts (for repair or replacementofdamagedparts),reassemblingandrefittingandrehangingsame withold fittings butwithnewscrewsasnecessary. (Wheredifferent partsof sameshutterarerenewedunderdifferent item,paymentunder item73willbe made once only).

Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge)

125 MM th in cement mortar Brick work (1:4)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m.II. Other than SAIL/ TATA/RINL

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge

Rendering thesurfaceofwallsandceilingwithwhitecement based wall putty of approved make and brand(1.5mm thick)

AcrylicDistemper tointeriorwall,ceilingwithacoatofsolventbased interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.

Supplyingand laying true to lineand level vitrified tilesof approvedbrand(sizenot less than 600mmX600mmX10 mmthick) in floor, skirtingetc. set in20mmsandcement mortar (1:4)and2mmthickcement slurrybacksideof tiles usingcement@2.91Kg./sqMorusingpolymerisedadhesive (6mmthicklayerapplieddirectlyoverfinishedartificialstone floor/Mosaic etc without any backing course) laid after application slurryusing1.75Kgof cement per sqMbelow mortar only, joints groutedwithadmixtureofwhite cement andcolouringpigment tomatchwithcolourof tiles / epoxy groutmaterialsofapprovedmakeasdirectedandremovalof wax coating of top surface of tiles withwarmwater and polishingthetilesusingsoftanddryclothuptomirror finish completeincludingthecostofmaterials, labourandallother incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement,syntheticadhesiveandgroutmaterial tobesupplied by the contrr]e

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar.(b) 20 mm thick plaster

(i) With 1:6 cement mortar.(c) 15 mm thick plaster

(ii) With 1:4 cement mortar.(c) 10 mm thick plaster

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).

Panelshuttersofdoorandwindow,asperdesign(eachpanelconsistingofsingle plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (Incaseofnon-supplyofsingleplank,penal rateofreductionof20%willbe made)(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On Timber surface :With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On Steel surface :With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white)

Providing and fixing of false ceilingwith powder coated exposedG.I. grid suspensionsystem(E-GridU-1520orequivalent loadcarryingcapacitywithmid spande flection not exceeding1/360spanwithhangerspacingof1200mmc/c) consistingofMainRunner3600mmlong,CrossTee1200mm/600mmlongand Wall Angle. TheWall Angle shall be fixed onPVCDashFasteners on the perimeterofthewallbysteelscrewswithdistance300mmc/c.TheMainRunners tobeplaced@1200mm.TheCrossTee1200mmwillbeinsertedinthepre-cut slotsofMainRunnerataregularintervalof600mmtoformamodulargridof 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendiculartotheCrossTee1200mmlongtofinallyformagridof600mmX 600mm.Gridofmodulesize600mmX600mmshallbesupportedby6mmdia G.I.wire frompurlins / soffit. 15mmthickOWAcousticBoard (MineralFiber AcousticCeilingTiles)ofapprovedpaternandsize595mmX595mmwithNRC value0.65shouldbeplacedintheGridmodule toformaFalseCeiling.All complete as per the drawing & directions of Engineer-in-charge. In ground floor.a) Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U 1520).

1.5 Ton AC with supply fitting and fixing all complete as per direction of EIC with minimum 3 years warranty and minimum 3 star rating (Hitachi/Dikin/Godrez/Panasonic/Worlpul/voltas)

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.

Cost of Sanitary plumbing and Electrical works ,works