District Magistrate Tender

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. River Bazree

Reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter section complete as per drawing and direction. I.(JSW/SHYAM/SRMB/SSL) 1.4 % of concrete volume i.e. 1.44 cum

Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheetplate with required bracing for any kind of plain orreinforced concrete works in all sorts of minor structure including culvert, box culvert, cross-drain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground cost Of chipping over concrete surface] With 1:6 cement mortar. 20mm.thick plaster

Net Cement Punning 1.5mm. thick in wall, dedo, window sills, floors, drains etc.using cement @ 0.152cum./IOOsqm. Same Quantity of Plaster area

Holding down bolt with nut including mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. (iii) 25mm dis (c) 750 mm long

Earthing with 50mm dia Galvanised iron pipe 3.64mm thick *3.04 mts long and I*4SWG Gl wire (1Mts long) 13mm*80mm dia GI bolts, double nuts double washers incl. S&F 15mm dia GI pipe protection (Imtr. Long) to be filled with bitumen as to GS. For soft soil ISL Medium Gl Pipe.

Supply and errection of 8 M hight mini mast system (Bajaj/Crompton/TransiI/Utkarsh make) on existing RCC foundation with its accessories. Mast shafty shall be in one section with steel materials onfirming to BSEN 10025 and material shall be high tensile steel grade S335, hot dip galvanized and suitable for wind velocity as per IS 875 part 3. It shall also include accessories for high mast including head frame. Top Dia 150mm & Bottom Dia 410mm with top and bottom thickness 4mm. It also include accessories for mast including frame with lantern carriage, PVC cable and junction box with all the best quality water resistance. Must have lader hook as per technical specification

Supply, fabrication & Fixing GI header/structure for fixing of 5 nos Flood Light made of 6*65mm Dia 500mm long CHS pipe and MS angle frame structure tip portion is cover with thick top plate welded with angle frame structure 4 nos angle frame each 300mm long. The header is also extra supported by 4nos vertical abgle of above specification including providing of 6nos hole for locking/checknut device with the frame size) 300*300 mm to the top & ST pole for fixing 6nos Flood. The complete header is also strengthening with design MS flat size 500mm 6mm thick including scoffloling arrangement for lifting the same at the top of 8mtr long ST pole as per direction of ECI including painting.

Supply of 27W (including all losses) All In one Solar LED Street Lighting System with minimum system lumen output of 4800 lumens, system lumen efficiency should not be less than 180 lumens/watt, 12V 60Watt Peak PV Module 380 Wh Lithium Ferro Phosphate (Lifep04) battery, integrated MPPT charge with driver and efficiency of both charger & driver is of The Iuuminaire shall have a rated system lifetime of 50,000 burni + 81432 hours at 170 and CCT of 5700 K.lt has Pressure dia cast aluminium housing with UV stabilized Polycarbonate front cover. The luminaire shall have CRI of and protection of IP 65. It has in-built motion sensor and LED indicator for charging and discharging of battery. The luminaire provides 2 days battery backup with factory setting dimming profile & PIR sensor. It has Horizontal & Vertical pole mounting options and tilt angle can be adjustable in between 0-15 degree. LM 80 report for LED source issued by LED manufacturer and test reports of solar PV module, Ba+B502ttery and Charge Controller. Philips make sunstay "BRP710 LED48 CW MR Sl 12V LFP solar IN" or Similar specification of HavelIs/Baiai/C&S/Crompton make

Supply & Fising information sing Board 750*450mm fabricated wth MS Sheet 16SWG and ISA frame 25*25*4mm including Painting and lettering with approved paint as per instruction of authority.

GST @ 18%

Labour Welfare Cess @ 1%