District Magistrate Tender

Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16G black annealed wire at every intersction, complete as per drawing and direction

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). With 1:4 cement mortar, 20 mm thick plaster

Neat Cement punning about 1.5 mm thick in wall, dado, window sill, floor etc

Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. 25 mm dia 750 mm long

Earthing with 50mm dia Galvanised iron pipe 3.64mm thick x3.04 mts long and 1x4SWG GI wire (1Mts long) 13mmx80mm dia GI bolts, double nuts, double washers incl. S&F 15mm dia GI pipe protection (1mtr. Long ) to be filled with bitumen as to GS. for soft soil ISI Medium GI Pipe

Supply and erection of 8 M hight mast syatem (Bajaj/Crompton/Transil/Utkarsh make) with its accessoiries. Mast shaftly shall be in one section, hot dip galvanized and suitable for wind velocoty as per 875 part 3 it shall also include acessories for high mast incluyding head frame. Top dia 150 mm & bottom dia 410 mm with top and bottom thickness 5mm..It also include accessories for mastr including frame with lantern carriage, PVC cable and junction box with all best quality water resistance.

Supply & Fixing carring of header/structure for fixing of 5 nos Flood Light made of 6x65mm Dia 500mm long CHS pipe and MS angle frame 40x40x6mm structure tip portion is cover with 750x750x3mm thick top plate welded with angle frame structure 4 nos angle frame each 300mm long. The header is also extra supported by 4nos vertical angle of above specification including providing of 6nos hole for locking/checknut device with the frame size 300x300 mm to the top & ST pole for fixing 6nos Flood. the complete header is also strengthening with design MS flat size 500mm 6mm thick including scoffloling arrangemets for lifting the same at the top of 8 mtr long ST pole as per diretion of EIC including painting.

Supply of 27W (including all losses) All in One Solar LED Street Lighting System with minimum system lumen output of 4800 lumens, system lumen effiencieny should not be less than 180 lumens per watt 12V 60Watt Peak PV Module, 380 Wh Lithium Ferro Phosphate (LiFePo4) battery, Integrated MPPT charger with driver and efficiency of both Charger & driver is of 90%. The luminaire shall have a rated system lifetime of 50,000 burning hours + B1432ng hours at L70 and CCT of 5700 K. It has Pressure Die Cast aluminium housing with UV stabilized Polycarbonate front cover. The luminaire shall have CRI of 70 and Protection of IP 65. It has in-built motion sensor and LED indicator for Charging and discharging of battery. The luminaire provides 2 days battery backup with factory setting dimming profile & PIR sensor. It has Horizontal & Vertical Pole Mounting options and Tilt angle can be adjustable in between 0 - 15 degree. LM 79 report and Type Test Certificate to be submitted for luminaire, LM 80 report for LED source issued by LED manufacturer and Test reports of Solar PV module, Battery and Charge Controller. Similar to Philips Make Sunstay “BRP710 LED45 CW MR S1 12V LFP Solar IN”. or similar specifications Havels/Bajaj make

Supply and fixing information sign board 750X450 mm fabricated with MS sheet 16SWG and frame 25X25X4 mm including painting and lettering with approved point as per instruction of authority

Add GST @ 18%

Add Labour welfare Cess @ 1%