District Magistrate Tender

PWD(WB)/BUILDING WORKS(CCS)/Page-192/Item-1 Labour for Chipping of concrete surface before taking upPlastering work.

PWD(WB)/BUILDING WORKS(CCS)/Page-189/Item-1 Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface]. (b) 20 mm. thick plaster.

PWD(WB)/BUILDING WORKS(CCS)/Page-200/Item-1 Priming one coat on timber or plastered surface with synthetic enamel oil bound primer of approved quality including smoothening surfaces by sand papering etc.

PWD(WB)/BUILDING WORKS(CCS)/Page-200/Item-2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary. (a) On timber or plastered surface: (iv) Two coats (with any shade except white).

PWD(WB)/BUILDING WORKS(CCS)/Page-99/Item-1 M.S structural work in colums, beams etc. with simple roled structural members (e.g. joints angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineering -in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc weldingconforming to IS: 816 - 1956 & IS :1995 using electrodes of approved make and brand conforming to IS: 814 - 1957, haulage, hoisting and erections all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidential charges such as electricity charges, labour incurance charges etc.(Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for Gusset, bracket, cleat, rivets, bolts and nuts may be make by adding

PWD(WB)/BUILDING WORKS(CCS)/Page-81/Item-9 Galvanized corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugaion minimum side lap. ( payment to be made on area of finished work). (GCI sheet to be supplied by contractor). (c)With 0.80 mm.thick sheet.

PWD(WB)/BUILDING WORKS(CCS)/Page-81/Item-10 Galvanised iron sheet ridging fitted with necessary bolt, screws, washers etc complete. (225 mm end lapping). (c)With 0.80 mm sheet.

PWD(WB)/BUILDING WORKS(CCS)/Page-82/Item-11 Galvanized iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm.M.S.flat bar clamps bent to design, bolts. Nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping). (b) 300 mm.wide gutter.

PWD(WB)/BUILDING WORKS(CCS)/Page-243/Item-9 Supplying bubble free float glass of approved make and brand. Conforming to IS: 2835-1987. (x) 10mm thick coloured / tinted / smoke glass.

PWD(WB)/BUILDING WORKS(CCS)/Page-165/Item-18 P.V.C- False Ceiling :Providing False Ceiling made with framework of steel tube of 40mm x 20mm ofnot less than 18 gauge,the long and cross section will be welded with each other1000mm to 1200mm apart the entire framework will be fixed in wall usingrawlplug or gutties or screws etc. and suspended from ceiling with M.S flat19mmx3mm as necessary,the entire frame will be painted with red oxide.PRINTED LAMINATED P.V.C Section 150mm x 12mmx 1.00mm (+/- 0.01mm)of approved quality and colour will be fixed on the frame so that the entireframework will not be visible from below P.V.C Section will be fixed with theframe with the help of self tapping steel screws including all materials and labourcharges including fitting,fixing the same and hoisting including mending thedamages in all respect and cost of paint as required as per direction of Engineerin-Charge .In ground floor.

PWD(WB)/BUILDING WORKS(CCS)/Page-106/Item-19a (a) Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G. of approved type, steel latche section 75 mm.wide, fitted with coil wire spring to necessitate the fitting of required No. of C.I. pulleys on heavy type solid drawn seamless steel tube complete with locking arrangement both inside and ouside specially built up side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.(Measurement will be made on the area of opening covered by the rolling shutter corrected, upto 2 decimal.)2. Payment of painting to be separately.

PWD(WB)/BUILDING WORKS(CCS)/Page-109/Item-21 Supplying , fitting and fixing cast iron heavy type spiral staircase of approved design with 50 mm. dia. Stem and C.I.steps 150 mm. as per design 900 mm. high C.I.railing including necessary M.S.tie of suitable section embedded to wall with cement concrete (1:2:4) including cost of intermediate C.I. platform secured with necessary tie to stem and wall with cement concrete (1:2:4) including fixing the stem in ground with cement concrete (1:3:6) complete in all respect with all labour and materials. (Payment to be made on vertical height in between 1st step and top platform.). (a) With 1200 mm. dia. Well.

PWD(WB)/BUILDING WORKS(CCS)/Page-16/Item-16 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

PWD(WB)/BUILDING WORKS(CCS)/Page-189/Item-1 Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface]. (a) 20 mm.thick plaster.

PWD(WB)/BUILDING WORKS(CCS)/Page-114/Item-1 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected up to three decimals).

PWD(WB)/BUILDING WORKS(CCS)/Page-117/Item-1 Panel shutters of door and window, as per design (each panel consisting of single plank with out joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.(In case of non-supply of single plank, panel rate of reduction of 20% will be made). (b) sishu,gamar,Champ,badam,bhola, mogra,Hallak,

PWD(WB)/BUILDING WORKS(CCS)/Page-64/Item-35 Supplying,Fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20 Kg/Sq.m. (i) Coloured decorative.

PWD(WB)/BUILDING WORKS(CCS)/Page-64/Item-35 Supplying,Fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar(1:3)15mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m. & joint filling using white cement slurry @0.20kg/Sq.m. (i) Coloured decorative.

PWD(WB)/SANITARY AND PLUMBING WORKS/Page-79/Item-2 Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.

PWD(WB)/SANITARY AND PLUMBING WORKS/Page-60/Item-1 Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S.3989/1970 and I.S.1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry conctrete, if necessary, and mending good damges with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the enter line of the total pipe line in fitted condition including specials, payment for specials & painting will however be paid seperately).

PWD(WB)/BUILDING WORKS(CCS)/Page-162/Item-7 Ceiling with 12mm thick wooden planks fitted and fixed complete (excluding thesupporting framework) as per direction of the Engineer-in-charge.In Ground Floor. (b) Sishu / Champ / Badam / Gamar / Bhola / Mogra / Hallak