District Magistrate Tender

Cement Concrete with graded stone ballast (20 mm size) excluding shuttering etc. as per direction of Engineer-in-charge, complete. In 6:3:1 proportion.In foundation.

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation & plinth.

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Plaster ( to wall, floor , ceiling etc. ) with sand cement mortar including Rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface, including threading nosing and drip Course where necessary. 15 mm thick plaster in sand cement morter (1:4) to out side.

M.S. or W. I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows, railing etc fitted & fixed with necessary screws and lugs in G.F.

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) b) With 0.63 mm thick sheet

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc.Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work.Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.

Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge. c) 37.5mm thick

Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor.iv) Other Local Wood

a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary :b) On steel or other metal surface :With super gloss (hi-gloss) -(ii) Two coats (white in shade)

125 mm thick bricks work with 1st class brick in cement mortar (4:1)

Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor.iv) Other Local Wood

a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary :b) On steel or other metal surface :With super gloss (hi-gloss) -(ii) Two coats (white in shade)

TOILET Cement Concrete with graded stone ballast (40 mm size) excluding shuttering etc. as per direction of Engineer-in-charge, complete. In 6:3:1 proportion.

125mm thick Brick work with 1st class bricks in cement mortar (4:1).

Plaster ( to wall, floor , ceiling etc. ) with sand cement mortar including Rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface, including threading nosing and drip Course where necessary. 15 mm tkick plaster in Cement Sand mortar (1:4)

20 mm tkick plaster in Cement Sand mortar (1:4)

Supplying, fitting & fixing Flat back urinal (half stall urinal) in white vitreous china ware of approved make in position with brass screws on 75 mm X 75mm X75 mm wooden block complete 635 mm X 395 mm X 420 mm

Supplying, fitting and fixing Orissa pattern water closet in white glased vitreous china ware of approved make in position complete excluding'P' or 'S' tram (excluding cost of concrete for fixing).

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete 1) 450 mm X 350 mm

Supplying 1.5MM thick MS Sheet Fitted and Fixed on MS Gate with welding not more than 15 CM apart ............Complete in all respect as per design incl. cost of labour and material.

Neat cement punning about 1.5mm thick in wall, dado, window sills floors, drains etc.

Artificial stone Floor..etc Complete…25mm,In Ground Floor

Applying decomative cement based paint of approved quality after preparing the surface including scraping the same throughly as per specification in ground floor . Two coat

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sqcm. ( for water lines only ) a) 25mm dia

Supplying, fitting and fixing bib cock of heavy quality and of approved make and brand. (b) PVC (i) 15 mm

Supplying, fitting & Fixing P.V.C. pipes for underground work of approved make ( medium duty ) conforming to ASTMD- 1785 and threaded to match with GI Pipes as per IS: 1239 (part - I) with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longs screw, reducing stock, reducing tee, short piece etc. fitted including cost of all materials jointing materials, cutting pipes, making threads, cutting trenches up to 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. ( payment will be made on the centre line measured of the total pipe line including all specials no separet payment will be made for accessories, specials.) (a) 25 mm dia.

(a)20 mm dia.

Wash basin vitreous china of approved make (without fittings) supplied,fittedand fixed positionon 75mmX75mmX75mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.(i) 450 mm X 300 mm size .

Electrification of Toilet

Add GST @ 18%

Add Cess @ 1 %