District Magistrate Tender

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm. as directed and consolidating the same by thorough saturation with water ramming complete, including the cost of supply of sand. (Payment to be made on measurement of finished quantity)

Ordinary Cement Concrete (mix 1 :2 :4) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, as per relevant IS codes.

Ordinary Cement Concrete (mix 1 :1.5 :3) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, as per relevant IS codes

Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary. (i) With 1:4 cement mortar (c) 20mm. thick plaster

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary. (ii) With 4:1 cement mortar (c) 10 mm. thick plaster

Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. in all floors about 1.5mm thick.

Supplying, fitting and fixing 1st quality Ceramic tiles in walls & floors to match the existing work & 4 nos of Key stones (10 mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc With Sand Cement Mortar (1:3) 15mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg / Sq.m. & joint filling using while cement slurry @ 0.20 Kg / Sq.m.

Supply of PVC Pipes and fittings (Medium Duty) conform to ATMD 1785-- as per IS 1239 Part I - 40 mm dia Column Pipe

125 mm. thick brick work with 1st class bricks in cement mortar (4:1)

M.S. Vertical iron treatment plant of dia 1.00 ft. x height 5.00 ft. with charge media and fine grave with all pipe fitting fixing and 5.00 no. value used ................as per direction

Oxidization chamber dia 1.00 ft. x height 1.5 ft. with MNO2 Media used and fitting & fixed all complete as per direction.

Chlorine chamber 8.00 galone with fitting & fixing all complete as per direction

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.

Labour for boring tubewell of required diameter by water jet system through any kind of soil i/c hire and labour charges for boring pipes, scafolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting fixing same complete i/c bucketing fixing of tubetubewell head in position and other related incidental works in the connection.The tubewell should have a min. 50mm gap in between the outside of tubewell pipe and bore. For depth upto 150m, 50mm dia. tubewell with top enlargement 100mm dia. a) 50 mm dia. Boring.

b) 100 mm dia. Boring..

Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.

Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete

Supply P.V.C. rigid pipe & fittings (Medium Duty) conforming ASTMD -1785 & Threaded to match with GI- pipes as per IS: 1239 (Part-I) a) 50 mm dia.

b) 100 mm dia.

Reducing Sockets 50 x 100 mm dia

Supply high dencity polythen strainer of approved make with adopter comforming to I.S. specification. a) 50 mm dia.

Suppling, fitting and fixing PVC pipe of approved make of (medium duty ) conforming to ASTMD - 1785 and threaded to match with G.I. pipe as per I.S. 1239 (Part I ) with all accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No sepatate payment will be made for accesories, specials. Payment for painting will be made seperately)

Supplying, fitting and fixing gun metal wheel valve of approved brand and make tested 21 Kg. / sq.cm.

Supplying fitting fixing of steel cutter piece upto 450 mm long with sockets a) 50 mm dia.

Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.

Supplying fitting and fixing at site of submersible pumping machinery (1.5 HP) capable to discharging clear of water 5000 litre per hour against total head of 49 M. complete with single phase (220V.), 50 Hz. A.C.Motor (make KSB/TEXMO/CROMPTON) along with 3 int. submersible cable (HQ curve of pump should be produced at the time of delivery)

Supplying fitting and fixing of core 2.5 mm 2 Flat Copper Submersible cable (make FINOLEXI HAVELL's)

Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality. [P-56, It -27] [SOR - S & P]

Supply of GI Bend,50 mm

Supply & delivery of 32 Amp. SPN Main Switch (HAVELL's)

Supply and control panel made of 16 SWG M.S. sheet phosphate powder Dust & Vermin proof consist of following internal wing complete) (1) 40 mm dia. (M) (a) 32 Amp. DPMCB (HAVELL's) Standard)....... 1 No. (b) Contractor (20A/22A) (SIMENS)............ 1 No. (c)Overload Relay (suitable Range Considering Motor current of SIMENS make). 1 No. (d) Start & Stop Push button (Red & Green)......1 No. (e) Start Capacitor..... 1 No. | Running Capacitor........ 1 No. (g) Voltmeter-100 sq.mm. dia. (0.300 V) make Al.. 1 No. (h) Ammeter- 100 sq.mm. dia. (0.30A) Make AE..... 1 No. O HRC fuse 30A/32A approved make Inter connecting wire of suitable gague (HAVELL'S).................. 1 No.

Installation of Main switch and control panel including making electrical connection complete by supplying all requisite materials as per direction of EIC

Supply, Fitting, Fixing Display Board at Work Site

Add for GST @ 12 %

Add for CESS@ 1 %