Digha Sankarpur Development Authority Tender

MODEL -Sabuj Sathi (Comprise with three girl figure 1500 mm height )

MODEL -Chota Bheem (Cartoon Character 1500 mm height )

MODEL -LOVE SIGN (About 1800 mm height )

Supplying, and installing of Fibre reinforced made combination of letter for the word" DIGHA" at site with fire resistive resin coating and also extra strong UV-4 protected against fading with suitable thickness according to the height 1800 mm Rate should be included included all structural framing work by iron angle,plate,nut and screw,welding work etc . The Colour should be made as per direction of EIC. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture. Height of the each letter not less than 1800 mm

Manufacturing, supplying, and installing fiber composite structures of decorative Gazebo (including false celling) Top around the periphery of 4 nos. Structral steel of 200 mmx200mm at top having internal size. 3000 mm x3000 mm around the periphery in square in shape with reinforced by 4 mm sq. bar covered by glass fiber reinforced polyester or vinyl ester resin matrix, approximately 50% glass by weight. A synthetic surface veil shall be the outermost layer covering the exterior surfaces. Glass strand roving’s shall be used internally for longitudinal strength specially for coastal area. The FRP having density may be between 1,2 g/cm3 and 2,0 g/cm3 and panels are about 0.09 inch in thickness, Fiber Mass Fraction 60-80%, Fiber Volume Fraction 50-60%, water absorption: ≤ 0.2%, synthetic surface veil fabric must encase the glass reinforcement and weigh about 12 ounces per square foot depending on the site condition. All the steel column surface and other exposed surface should be cover by decorative “FRP” laminates. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC. The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. Relevant construction and/or structural drawings for all FRP components shall be submitted to the EIC for approval in accordance with the requirements as per this specification. FRP Roof -Specification & Details Color : As desired Material : FRP Size=3000 mm x3000mm Type=Square in Shape Height = 2400 mm Projection from Outer Column face=200 mm(Average) Waterproof : Yes

Supplying, and installing of Fibre glass made MODEL HORSE( STYLE- TERACOTTA) high quality finish at site with fire resistive resin coating and also extra strong UV-4 protected against fading with thickness of 4 mm. Rate should be included included all structural framing work by iron angle,plate,nut and screw,welding work etc . The set is a molded fiberglass and resin with the design of the traditional Staunton style that is familiar to all chess players. The artistry of the knight makes that the center of attention of this larger-than-life-size chess set. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture. Specification : Material: Fiberglass (Raw Materials: Fiber Sheets, Resin, Hardner, Fiber Chalk etc)

Height = 2 meter

Height = 1.5 meter

Height = 0.8 meter

Supplying, and installing of FRP made polished Sculpture of LORD BUDDHA . The style of the sitting Buddha in varasana, or half lotus pose The sculpture need attractive finish designs as well as beautiful colorshade, which makes these highly preferred for use in park areas. The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC. Height of the Lord Buddha 1500 mm , seating over half lotus with appropriate shape Material=FRP(Fibre-Reinforced Plastic) Waterproof : Yes

Supplying, and installing of Fibre glass made MEGA CHESS PIECES at site with fire resistive resin coating and also extra strong UV-4 protected against fading with suitable thickness and 300 mm dia base. Rate should be included included all structural framing work by iron angle,plate,nut and screw,welding work etc . The set is a molded fiberglass and resin with the design of the traditional Staunton style that is familiar to all chess players. The artistry of the knight makes that the center of attention of this larger-than-life-size chess set. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture. Specification details given below

King 1 black & 1 white Pieces- 1250 mm tall

Queen 1 black & 1 white Pieces- 1150 mm tall

Bishop 2 black & 2 white Pieces- 1000 mm tall

Knight 2 black & 2 white Pieces- 800 mm tall

Rook 2 black & 2 white Pieces- 900 mm tall

Pawn 8 black & 8 white Pieces- 700 mm tall

Supplying, and installing of FRP made different Shaped model (PU Colour Coat) at site with fire resistive resin coating with suitable thickness and also suitably placed on FRP rockery with pedestal. Rate should be included included all structural framing work by iron angle,plate,nut and screw,welding work etc . The FRP having density may be between 1,2 g/cm3 and 2,0 g/cm3 and about 0.09 inch in thickness, Fiber Mass Fraction 60-80%, Fiber Volume Fraction 50-60%, water absorption: ≤ 0.2% The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC.

Shape DEAR (Size 1800 mmX 1700 mm)

Shape DEAR (Size 1000 mmX 1000 mm)

Shape DEAR (Size 800 mmX 750 mm)

Shape DEAR (Size 550 mmX 500 mm)

Shape DRAGON (Size 2300 mmX 1500 mm)

Shape cartoon decorative statue (Height =900 mm)

Shape Egret Bird

MODEL Dolphin (1200 mm length)

FRP covering finishing over existing MODEL MASROOM (3500 mm height with top dia 3000 mm)

Model represent UNITY of multiple figure about 1.8 Mtr height (At New Digha)

Manufacturing, supplying, and installing of Concrete Chair 3 seater with arm rest and back support for outside seating painted with Spray Paint for shiny look as per this specification. Each bench consists of 2 Nos. L-shape base support in grey cement colour (thickness:80 mm, Back height:890 mm, Front height:450mm, and Base width:690mm) and 1 nos. reinforced concrete plank in different colour of size 1500mm X 400mm X 50mm, and 1 no. of reinforced concrete plank indifferent colour of size 1500mm X 425mm X 50mm. Overall Dimensions: Seating length of the Bench:1500 mm, Seating height of the Bench:450 mm, Total height of the Bench:890 mm Manufactured by using M-30 grade of Concrete using vibro compaction process. Reinforced suitably to promote long use and to prevent damage during handling, transportation, & erection All parts are joined together with galvanized nuts & bolts of suitable size and all bolts are sealed after assembly Bench top and back planks are treated with special anti-corrosive, water proof coating so as to make surfaces glossy and water proof. The Manufacturer/supplier shall provide full details including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification. Material=Concrete Style = Garden Size=3 Seater (Specified in nomenclature) Colour- As per desired Waterproof : Yes

Manufacturing, supplying, and installing fiber composite structures of decorative Gazebo Top around the periphery of 8 nos. concrete column of 200 mm dia at top having internal diameter. 1.950 mm and outer cantilever portion from column face about 200 mm around the periphery in octagonal in shape with reinforced by 4 mm sq. bar covered by glass fiber reinforced polyester or vinyl ester resin matrix, approximately 50% glass by weight. A synthetic surface veil shall be the outermost layer covering the exterior surfaces. Glass strand roving’s shall be used internally for longitudinal strength specially for coastal area. The FRP having density may be between 1,2 g/cm3 and 2,0 g/cm3 and panels are about 0.09 inch in thickness, Fiber Mass Fraction 60-80%, Fiber Volume Fraction 50-60%, water absorption: ≤ 0.2%, synthetic surface veil fabric must encase the glass reinforcement and weigh about 12 ounces per square foot depending on the site condition. All the existing column surface and other exposed surface should be cover by decorative “FRP” laminates. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC. The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. Relevant construction and/or structural drawings for all FRP components shall be submitted to the EIC for approval in accordance with the requirements as per this specification. FRP Roof -Specification & Details Color : As desired Material : FRP Dia of Structure=4900 mm Type=Quadrilateral in shape (inclined) Height = 750 mm Projection from Outer Column face=200 mm(Average) Waterproof : Yes

Manufacturing, supplying, and installing of Garden bench 3 seater for outside seating with cast iron Leg Support painted with Spray Paint for shiny look and Seating Material Slats/Strips - 4mm thick and strong FRP (Fibre-Reinforced Plastic) is Strong and durable design to take load up to 350 Kg. distributed across the length. Relevant construction and/or structural drawings shall be submitted to the EIC for approval in accordance with the requirements as per this specification. The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC. Dimension=69D x 160W x 88H Centimeters Material=Cast Iron,FRP(Fibre-Reinforced Plastic) Style = Garden Size=3 Seater Furniture Finish= Natural Wood Seat Height : 16 Inches Item Weight : Not less than 55 Kg Waterproof : Yes

Supplying fitting and fixing FRP finished 3D wall mural with Matt finish, the thickness of the FRP work is ranges between 4 mm to 8 mm. The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC. Material=FRP(Fibre-Reinforced Plastic) Finish- Matt Thickness- 4 mm to 8 mm. Length= 4 m , width= 2.5 Mtr Waterproof : Yes

Supplying, and installing of Fibre glass made decorative big artifical (MAPLE) tree about 3 meter height , stem dia approx 600-750 mm , top dia approx -4 meter with sufficient leaf for attraction and it also highlighting 25-30 nos government scheme writing over circular PVC ball and fitted on the tree including electrial lighting work complete in all respect .Its need attractive finish designs as well as beautiful color combinations which makes these highly preferred for use in park areas.Rate should be included included all structural framing work by iron angle,plate,nut and screw,welding work etc . The Manufacturer/supplier shall provide full details of the Fiberglass materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost. Plant Type-Artificial Hand Made Supply of PVC ball - 25- 30 Nos( mentioning govt scheme name each) Type-Artificial Plants(MAPLE TREE) Material=Fiberglass Size=Custom Design, height 3 meter, stem dia-750 mm Colour= Multi Colour Usage/Application-Outdoor Structure-Steel frame work covered with FRP Shape-Maple Tree Waterproof : Yes

Supplying, and installing of FRP made revolving Kids Merry Go Round customized with MS Pillar material with FRP ladder material for age group of 4 to 12 years with capacity of 4 nos children .Its need attractive finish designs as well as beautiful color combinations with MS pillar material powder coating and body paint with with PU Paint highly preferred for use in park areas. The Manufacturer/supplier shall provide full details of the drawing (Plan/ Elevation /side elevation)of the structure with all necessary dimension including all necessary photos from different angle at the time of bid submission. The Manufacturer/supplier shall provide FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners as and when asked by the EIC. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC. Features =Kids Merry Go Round Color= All colour available Type=Outdoor Play Station Capacity= Group of 4 nos children Safe Play Area=2.0x 2.0 m Deck Shape=Circle Slide Materia=FRP Body Structure=MS (Steel Components all powder coated with anticorrosion treatment) Pillar Material=MS with powder coated Metal Coating=Powder Coating Waterproof : Yes

Supplying, and installing of Girrape shape FRP made Plain Slide Senior(length=6m , height=2 m)suitable for 3 to 10 years children having specified dimension fitted with MS ladder material .Its need attractive finish designs as well as beautiful color combinations which makes these highly preferred for use in park areas. The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC. Platform Height =1800-2000 mm length=6.00 mtr (approximately) Body Material=FRP Ladder Material=MS(Steel Components all powder coated with anticorrosion treatment) Colour= As desierd by EIC Usage/Application-Outdoor Waterproof : Yes

Supplying, and installing of FRP made fibre circular swing for age group of 3 to 10 years children customized with MS Pillar material or frame work having specified dimension. Its need attractive finish designs as well as beautiful color combinations which makes these highly preferred for use in park areas. The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC. Body Material=FRP Supporting Material=MS(Steel Components all powder coated with FRP treatment) Colour= As desierd by EIC Usage/Application-Outdoor Waterproof : Yes

Supplying, and installing of FRP made double see saw suitable for age group of 3 to 10 years children customized with MS Pillar material or frame work having specified dimension. Its need attractive finish designs as well as beautiful color combinations which makes these highly preferred for use in park areas. The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC. Body Material=FRP Supporting Material=MS(Steel Components all powder coated with anticorrosion treatment) Colour= As desierd by EIC Usage/Application-Outdoor Waterproof : Yes

Supplying, and installing of FRP made single see saw suitable for age group of 3 to 10 years children customized with MS Pillar material or frame work having specified dimension. Its need attractive finish designs as well as beautiful color combinations which makes these highly preferred for use in park areas. The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC. Body Material=FRP Supporting Material=MS(Steel Components all powder coated with anticorrosion treatment) Colour= As desierd by EIC Usage/Application-Outdoor Waterproof : Yes