Department Of Urban Development And Municipal Affairs Tender

Supply of 1100 volt Grade PVC/XLPE insulated armoured AJumnium conduc tor cables (HD) ,

4C x 10Sq mm Armoured

4 C x 16 Sq mm Armoured

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly Upto 9.0 mtr. Size 0.6x0.6x1.70 mts

Supply of 50mm heavy gauge Polythene Pipe

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Supply and fixing compression type gland complete with brass ring for dust and moisture proof entry of XLPE/PVC armoured cable

4 X 10 sq.mm

4 X 16 sq.mm

Finishing the end of following XLPE/PVC armoured cables by crimping method including supplying and fixing solderless socket (Dowels make), taps, anticorrosive paste & jointing materils.

4 X 10 sq.mm

4 X 16 sq.mm

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 3 x 22/0.3 (1.5 sqmm)

Hoisting fixing and commissioning of luminaries including making necessary connection and earthing attachment: HPMV/HPSV luminaries/LED fittings of any wattage.

Earthing with 50mm d1a GI Pipe 3.64mm thtCk x 3.04mtr long and 1 x 4 SWG GI (Hot Dip) Wire (4mtr 1ong) 13mm x 80 mm long Gt bolts double nuts, double washers inciuding S & F 15- mm dIa GI pipe protection (1mtr long) to be filed with bitumen partly under ground level and partly above the ground level dnven to an ave depth of 3.65mtr below the ground level and restoring surface duly rammed as below 1) For Morrum SoiI by ISI -Medium GI Pipe

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages a) solid GI wire ii) No. 6 SWG 3 mtr each for 75 poles= 225 12 m each for 2 feeder piller box= 24

Installation the feeder pillar box only on cement brick foundation including plastering and neat cementing as per specification and direction of E.I.C. c) For large size feeder pillar box.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required SIZE- 4 x 80/0.4 (10 sqmm)

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 32A HAVELLS

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 100A

Painting Block Letters or Digits within a circle/square as required, with ”Black Japan” paint of approved make & brand, the size of letters and digits as given below, Size 50 mm and upto 75 mm

Supplying & Erection of big size feeder pillar box of Size (1372 x 914 x 607 mm) made up of 3.15 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35x35x3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C.

Microtunnelling arrangement and laying of 65mm dia 5mm thick HD PVC pipe through earth below 1m ground level comptete with arrangement of machinery, pipe etc

Supply and Fixing of fuse unit complete with base and bridge on existing Board and necessary connection, for the 60 Amp. / 63 Amp., 415 V

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection, legrand- 6-32A(SP)

Supplying of Bakelite sheet a) 3 mm thick

Supply and delivery of Electronic Timer suitable for 240/ 360/415V, 50 Hz(Make: L&T/ABB/Schneider/Simence/ GE/Minilic) of the following time (Second) range:b) 12.0 to 120.0

Supply and fixing of 240/230 volt, 50 Hz, T.P., power contactor (Make: L & T/ABB/Schneider/Simence/ GE) having contact block of the following range g) 50-85Amp

Supply of 12.0/12.50 meter High mast lighting system with its accessories. Mast shaft shall be in two sections with steel material confirming to BSEN 10025 and material shall be high tensile steel, grade S355, hot dip galvanised confirming to BSEN ISO 1461 and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, 2 continues steel wire rope 6 mm dia (7/19 construction), trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for up to 9 luminaires symmetrically & its control gear (Make of Gear Box : New Allen Berry works / Chandra Gear / Elecon Engineering / Shanti Engineering) boxes and lightning finial. The mast shall have an integral powertool installed inside the base compartment for its operation along with Supply & Fixing of Cu Cable of Power Tool motor, Wiring for Luminaries, Anchor Plate,Foundation Bolt, Nut, Washer, Common Template all complete. Luminaire wiring materials not included in this item.(Make: Bajaj / Transrail / Valmond)

Erection of high Mast (12.0/12.5 M) on RCC foundation with cement concrete considering actual SBC of soil, with the help of suitable modern engg. tools and Plants, wiring of luminaries with all wiring materials like PVC insulated flexible cable of suitable copper conductor core of 1.5 mm² lugs, up to 10 nos. 6A MCB along with construction of shallow foundation with cement concrete for high Mast considering the safe soil bearing capacity as per site condition, as per drawing and design of manufacturer of the mast. The soil test and submission of its report is within the scope of the work.

Excavation of soil for installation of Earth Electrode and filling & ramming for soft soil.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63] A. 6 Kg / Sq.Cm. (Working Pressure) Dia - 50mm

Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. ) (B)Under Ground (vi) 50 mm dia.

Supplying and drawing 1.1KV Single Core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necessary connection as required from terminal box at Bottom end to the respective LED fittings. 1.e) 3 x 36/0.3(2.5 sqmm.)

Supplying and fixing 240/415V MCB of Breaking Capacity 10KA & C characteristics on din rail of existing DBs and necessary connection. 10 Amp (SP).

10 Amp (DP)

32 Amp (FP).

Fixing only flood light fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure

Painting of steel tubular pole of lengths and no. of cables of paint, as given below with ready mixed paint/primer of approved make, and brand including preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint upto 9.0 Mtr. long Pole i) One coat of red lead/Zinc chromate priming

ii) 1st Coat of synthetic enamel paint over the primer.

iii) 2nd coat of synthetic enamel paint over the 1st coat.

Supply & delivery of High efficiency LED flood light luminaries with High Power LED and unique flood optics to suit uniform distribution ideal for area lighting. System wattage: 200 Watts System lumen output : 100 Lumen/watt Lumen maintenance with IP66 protection. Warranty : 5 (five) years.

Operation and Maintenance cost for 3 years after successful completion and 1 year warranty period excluding cost of electricity but including the cost of all manpower, day to day maintenance and all kind of repairing and maintenance. (Day to Day switching Off-On, minor nce & thorough supervision for 3 years . i.e 36 months)