Municipal Affairs Department Tender

Supplying, Installation, Fittings, Testing and Commissioning of House Water Supply Connections, with P.E. Pipe & P.E. Compression EF fittings, Excavation, all short of Bituminous / Concrete Road Up to depth of D.I.(any dia)/HDPE Distribution Pipe line Bottom, Cuttings Fittings, Fixing, MDPE pipe & PE Pipe fittings up to C.I. Bib/Stop Cock 1 no. to consumer premises for an average length of 10 mtrs, Including Full Restoration if any damage of Under Ground Drainage lines,above ground Open Chanel Drainage Systems,Electrical lines, Tele phone lines , other Water supply lines,Crossing drain line through G.I. Conduit pipe Including Leakage Testing, supply of MDPE Pipes PE 100, PN 16, 10 Mtrs. (Average), PE Compression Elbow 90 deg.-4 nos, P.E. Adopter with SS insert M/F Thread-Compression - 3 nos., Gunmetal Ferrule confirming to IS 2692/1984 (reaffirmed 2005) in case of DI distribution line(any dia) providing with clamp saddle as per specification and direction E.I.C. 3 nos. Electrofusion tapping ferrule/saddle, MDPE (PE100) of pressure rating PN 16/SDR 11, to disconnect the connection in case of authority requries etc.with s.s. cutter 8mm dia, flow regulator, water tight cap-cutting edges and making hole /tapping 8mm dia in case of HDPE distribution line, 1 No. NRV confirming to IS 778/class I - 1 no.,tested.C.I Bib / Stop cock - 1 no., P.E. Meter Box / Cabinet with Common Lockable Key Suitable for Cover Meter - 1 no., PVC Ball Valve & NRV -1 no.Back filling with Silver sand 300mm thik over ferrule and balance depth with excavated earth up to Road Level and also remove surplus earth from Road Side, including fixing of meter as per direction of EIC. House Water Supply Connection Through 15mm dia MDPE Pipes. Supply, Delivery, Unloading and proper staking at site of 15mm dia Multijet type Water Meters, Class B, +/- 2%, IS 779 / ISO 4064, Admissible Pr. Max. 16 Kg/Cm² 360-degree Orientable, Cybal Coumputable, Magnetic transmission drive, Cooper can Mineral Glass 5mm Thik Envelop, Extra dry Dial, Totalizer, Protection Class IP 68, Strainer Inbuilt, EEC/MID Marked with Brass Nuts & Nipples. (Vendor list to be approved by the concerned Superintending Engineer, MED before execution of Work.) 15mm Dia. Water Meter Typical Performance. i)Starting flow :- ≤10 L/Hr. ii) Accuracy from +/- 5% :- 30 L/Hr. iii)Accuracy from +/- 2% :- 120 L/Hr. iv)Max. Flow +/- 2% :- 3000 L/Hr.