Department Of Rural Development And Panchayats Tender

Dismantling of Flexible Pavements: Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specifications Clause 202 for Rural Roads of MORD. (I) By Manual Means a) Bituminous Courses [Page-235, Item- 2.14, I(a), PWD (WB) Schedule of Rates: 2018 R&B Works]

Welding by gas / electric plant: Welding by gas / electric plant including transportation of welding plant at site including cutting, forging & drilling to required shape. [Page-235, Item- 2.14, I(a), PWD (WB) Schedule of Rates: 2018 R&B Works]

M.S. Works in bolts and nuts: M.S. Works in bolts and nuts of different sizes fitted and fixed in position including drilling holes and welding including cost of labour and materials [Page-333, Item- 18.12, PWD (WB) Schedule of Rates: 2018 R&B Works]

Labour for M.S. work in Rolled steel joists: Labour for M.S. work in Rolled steel joists, channels, angles. Tees, plates etc. including hoisting, placing in position including providing staging and removing after completion of works and cutting to sizes as required. [Page-334, Item- 18.13, PWD (WB) Schedule of Rates: 2018 R&B Works]

Re- fitting: Re- fitting R.S. Joist, Angles, Tees, Plates, and other steel materials by sawing. [Page-334, Item- 18.14, PWD (WB) Schedule of Rates: 2018 R&B Works]

Re- fitting the railing: Re- fitting the railing with old and new bolts as required. [Page-334, Item- 18.15, PWD (WB) Schedule of Rates: 2018 R&B Works]

Supplying empty Cement bags: Supplying empty Cement bags in good condition. [Page-336, Item- 18.28, PWD (WB) Schedule of Rates: 2018 R&B Works]

Filling empty Cement bags: Filling empty Cement bags with dry earth or sand, stitching the bag (cost of thread included) and carrying and placing them in position and all incidental charges complete but excluding cost of sand and gunny bags. [Page-336, Item- 18.29, PWD (WB) Schedule of Rates: 2018 R&B Works]

Open-Graded Premix Surfacing using Bituminous (Viscosity grade Paving Bitumen / Modified bitumen) Binder and Mobile Hot Mix Plant (Light Duty) : Open-Graded Premix Surfacing using Bituminous (Viscosity grade Paving Bitumen / Modified bitumen) Binder and Mobile Hot Mix Plant (Light Duty) Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates (N.B. Variety), including thoroughly cleaning of the urface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture niformly over the surface, including line, grade and level to serve as wearing course on a reviously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and horoughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of Type B as per technical Specification Clause 508 for Rural Roads of MORD. [Page-257, Item- 5.11, PWD (WB) Schedule of Rates: 2018 R&B Works]

Seal Coat: Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). I By Mechanical Means (i) With Hot Bitumen Binder (@ 6.80 kg / 10 sqm.) [Page-258, Item- 5.13, B, PWD (WB) Schedule of Rates: 2018 R&B Works]

Supplying fitting, fixing GI Nut, Bolts : Supplying fitting, fixing GI Nut, Bolts and washer as required including cost and carriage of materials complete as per direction of EIC. Payment made as per Quatation

GST

CESS