Department Of Rural Development And Panchayats Tender

B. Maintenance of Earthen shoulder (stripping of excess soil):Stripping excess soil from the shoulder surface toachieve the approved level and compacting withplate compactor at OMC as per drawings andTechnical Specification Clause 1903 for RuralRoads of MORD. (Average thickness 150 mm

Water Bound Macadam Grade -III:Providing, laying, spreading and compacting stoneaggregates of specific sizes to water bound macadamspecification including spreading in uniform thickness,hand packing, rolling with vibratory roller 8-10 tonnesin stages to proper grade and camber, applying andbrooming requisite type of screening / bindingmaterials to fill up the interstices of coarse aggregate,watering including lighting, guarding, barricading andmaking necessary earthen bundh of one metre width oneach side and preparing the bed by necessary cutting or filling, including cost of all materials and hire andlabour charges of all men and machinery andcompacting to the required density, as per Clause404of Specifications for Road & Bridge Works of MoRT&H B. Manual Means (iii) Grading-III Aggregate (53 mm to 22.4 mm) Using Stone Screening Type B

Prime Coat : Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface andspraying primer using Mechanical means including costand carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (i) For WBM / WMM Surface: (with primer @ 0.70-1.0 kg/sqm)

Tack Coat : Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machineryand labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

PREMIX : 20mm thick Open Graded Premix Carpet using bituminous (penetration grade/modified bitumen) Binder Providing Laying & rolling of open - graded premix carpet of 20 mm thk composed of 13.2 mm to 5.6 mm aggregates eighter using penetration ...... coat on either Type A or Tupe B or type C as per Technical Specification Clause 508. of Rural Roads including lighting, guarding, barricading etc. complete Case- I by manual means.

Seal Coat : Providing and laying seal coat sealing the voids in bituminous surface laid to specified levels, grade and crossfall using Type B as per Technical Specification Clause 510 of Specification of Rural Roads by manual means.

Pre Coating chips : Pre coating stone aggregates with Hot mix @56kg/cum of net volume of stone aggregates in concrete mixture including pre heating the stone aggregate at suitable temparature including the cost of carriage of the stone aggregate at the mixing yard and carriage of the pre coated materials for dumping at a suitable place as directed including cost and carriage of Bitumen and hire charges of machinaries and all incidental charges complete as per direction of Engineer-in-charge (As pre PWD Roads Schedule of rates)

I) Maintenance of Culverts Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1908 for Rural Roads of MORD.

Maintenance of 200 metre and Km stones : Maintenance of 200 metre km stone by way of refitting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912 for Rural Roads of MORD.

Maintenance of Road Signs : Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and direction of Engineering - in- Charge and following technical specification Clause 1910 of Specification of Rural Roads

(ii)Construction of Ordinary Kilometre Stone (Precast)

(iii)Construction of 200m Stone (Precast)

White washing of parapet walls of CD work and tree truncks : White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning, scraping etc. as per technical specifications Clause 1915 of Specification of Rural Roads.

Providing and fixing the typical PMGSY informatory sign board with Logo as per MORD specifications & drawing. Three MS plate of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25 mm X 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm X 25mm X 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos 75 mm X 75mm X 12 SWG sheet tubes posts duly embedded in cement concrete M 15 grade blocks of 450mm X 450mm X 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm X 47mm of 12 SWG steel plate tube. All MS will be stove enabled on both sides. Lettering required shades and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701. Annexure 1700.1 i) Logo Board at Starting point( As per Fig. 1 of road sinage under PMGSY, Published by the NRRDA on Dec'06)