Department Of Rural Development And Panchayats Tender

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Oakland Corner Table as per following specification. Overall Size :Width : 53.3cm Depth : 44cm Height : 54cmTop :Rubber wood ,Understructure : Rubber wood , Shade :Cherry , Construction :Knock down , Load Bearing Capacity :Corner Table : 25 kg

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Oakland Center Table as per following specification. Overall Size :Width : 120cm Depth : 60.3cm Height : 45.5cmTop :Rubber wood ,Understructure : Rubber wood , Shade :Cherry , Construction :Knock down , Load Bearing Capacity :Coffee Table : 35 kg

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Motion High Back Chair with Larger Seat & Adjustable Armrests as per following specification. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/1/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression.TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors. TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make VSDU-2 with Wooden Top as per following specification. Overall Dimensions of VSDU - 2 shall be 900mm(W)x450mm(D)x735mm(H) . The top shall be wooden top PLB(25 mm add in unit height ) .The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - 'D' Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . VSDU - 2 shall have 1 no. of adjustable full shelf . Accessories optional shall be cradle with pipes for hanging godrej instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . For VSDU 2 - A4 size box file can be stored vertically on one shelf and clear space above second shelf is 220 mm .

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Clermont 1 Seater Recliner as per following specification. Dimension: Width 1070mm, Depth 890mm, Height 1030mm, Seat Height 510mm. The aesthetically appealing Clermont 1 Seater Recliner comes with composit leather uphosltery that promises longivity. The clermont recliner with its solid armrest make it apt for upright seating. The reclienr can be adjusted to any angle basis an individual's need for comfort. The high back rest with head support enable one to sit restfully for long hours.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Topo Table Round with Corian Top as per following specification. WORKTOP : Worktop is made of combination of 12mm and 6mm thk Corian (matt finish), and 18mm thk Marine ply(BWP Grade)(As per IS:710) with 0.6mm backing laminate on bottom side. Corian is composed of acrylic resin and natural minerals that make it a non-porous, non-toxic, water-proof, seam-less and homogeneous surfacing material with resistance to scratches, stains, mould and mildew. The Worktop is available in 5 shapes, viz.: Circle, Bite, Rectangle, Square, & Facet. UNDER-STRUCTURE: The under-structure consists of an Inner Tube Assembly with Top Plate, for Worktop Mounting, & an Outer Tube Assembly with Round / Rectangle / Square Bottom Plate. The Inner & Outer Tube Assemblies are telescopically connected. The Top Plate is made of 5mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) & the bottom plate is made of 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 082.5 x 2thk ROUND ELECTRIC RESISTANCE WELDED Tub4 (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The Outer Tube Assembly is made of 089 x 2.5 thk and ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The whole structure is EPDXY POLYESTER Powder Coated (DFT 40-60 microns). The product has a knock-down construction. It is assembled using alloy steel hardware (blackened & coated with rust preventive oil).

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Greet Chair as per following specification. SHELL : The seat-back shell is made of 15mm Plywood (As per IS:303) panels connected using Brackets made from 3mm Hot Rolled Steel Plates (HR) (As per IS:2062). The Steel Brackets are Epoxy Polyester Powder Coated (DFT 40-60 microns). 25mm PU slab-stock foam is pasted onto both sides of the shell and picnhed together to achieve the radius along the periphery. It is upholstered in Leatherette. SEAT CUSHION : The seat-cushion is made using 50mm PU slab-stock foam and is upholstered in Leatherette. It is held in place with hook and loop tape stitched to it's bottom side. UNDERSTRUCTURE : The understructure is made of FSC-certified seasoned Teak-Wood finished with a clear matt coat of PU Lacquer. Understructure members are glued together using Epoxy Resin Based Adhesive. The shell is fixed to the understructure using alloy steel hardware (blackened & coated with rust preventive oil).

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Mingle AV Elegance Modular Table (5 Seater) with Grommet Cutout as per following specification. Work Surface : Made of 36mm thick MDFone side prelaminate board conforming to IS14587: 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Full length access panel is provided with soft closing hinges inline with worktop edge. Worktop is available in various shapes as shown above. Understructure- The understructure consist of mixture of 18mm and 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Modesty Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Wire Management An array of panels made of 0.8mm and 1.2 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Cutout for Standard Anchor Roma 4 module is provided for electrical fittings in Straight two seater and single seater modules below access flap per seat. For straight two seater and single seater modules, provision to mount AV cables is provided (eg. HDMI,VGAA, etc). Only Corner 90°, 30° corner and 50° corner modules have provision for wire flow between adjacent tables.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Halo High Back Chair as per following specification. The seat should be made up of 1.2 ± 0.1cm. thick hot pressed plywood and upholstered with leather and moulded Polyurethane Foam. The back foam should be designed with contoured lumber support for extra comfort. BACK SIZE is 53.0cm.(W) X 80.0cm.(H). SEAT SIZE is 54.6cm.(W) X 49.0cm (D). The HR polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf for 25% compression. The seat and back should be arrested together with spine made of 0.8 ±0.05 cm thk HR Steel and should be black powder-coated ( DFT 40-60 microns ). The armrest assy. should be comprised of three parts viz. the armrest support tube and P.U. armrest and the armrest top. The armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm M.S. E.R.W. support tubes and Chrome plated. The P.U. armrest should be made of black integral skin polyurethane with 50-70 shore 'A' Hardness and reinforced with M.S. insert. The armrest top should be made of ABS & upholstered with foam & leather. The mechanism should be designed with the following features: •360° revolving type. •Seat back tilting ratio of 1 : 1.5 Front pivot for tilt with feet resting on ground ensuring more comfort. •Tilt tension adjustment. •5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock should be released. •Static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking. Pneumatic height adjustment should have an adjustment stroke of 9.0 ± 0.3cm. The bellow should be 1 piece and blow moulded in black Polypropylene. The pedestal should be made of die-cast aluminium with buffing finish. It should be fitted with 5nos. twin wheel castor. The pedestal should be 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). The twin wheel castors should be injection moulded in black Nylon.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Kareena NXT Visitor Chair as per following specification. SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should be made up 1.2 ±0.1cm. thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should be designed with contoured lumber support for comfortable seating posture. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should be moulded with density = 45±2 kg/m³ and Hardness load 16 ± 2 kgf for 25% compression. ARMRESTS:The armrest top should be made of moulded polyurethane (P.U) and mounted on to a fixed type M.S. tubular armrest support which should be chrome plated. The arm support has static vertical adjustment of ±1.5±0.05cm. FIXED BACKREST: The backrest consshould be ts of a fixed type mechanism i.e. no back up/down adjustment. LEG FRAME ASSEMBLY: The leg frame welded assembly should be chrome plated, made from 3.5 ±0.03cm. x 1.5 ±0.02cm. x 0.16 ±0.0128cm. thk Elliptical M.S. ERW tube and provided with a base plate for seat fixing.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Coniferous 2 seater sofa as per following specification. Upholstery Material : Fabric, Shade : Grey, Thickness : 1 mm, Weight (GSM) : 320. Frame : Material : Rubber Wood. Shade : Brown oak. Foam : Material : Slab stock, Density : Seat 24 kg/cubic m, Back: 17 kg/cubic m. Webbing : Material : S spring, Thickness : 4 mm. Construction : Knock down. Strength and durability : The frame is made of rubber wood which is extremely resilient and sturdy. Rubber wood is a long lasting natural material which can withstand abuse and hence increases the longevity of the sofa.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Edward Corner Table as per following specification. Overall Size : Width : 60cm Depth : 60cm Height : 45cmTABLE METERIALS & SIZE :TOP:Sheesham 18 mm LEGS: 80X80 Top Side 40X40 Bottom Side Support 45x25mm & 8 Pcs Bolt & Nut. Manufacturer should have Green Guard certificate along with products certifications like; AIOTA,INDIAN DESIGN MARK, BIFMA level 2 conforms to ANMSI/BIFMA Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015,ISO 14001:2018,ISO 50001:2018, ISO 13485:2016 is mandatory. Manufacturer should have Green Guard Certification for few of its products. All the ISO certificates should be obtained from NABCB (Central Govt.) accredited organization otherwise certificates will not be accepted.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Victoria Coffee Table as per following specification. Overall Size : Width : 118cm Depth : 60cm Height : 45cmTABLE METERIALS & SIZE :TOP:Sheesham 18 mm LEGS: 80X80 Top Side 40X40 Bottom Side Support 45x25mm & 8 Pcs Bolt & Nut. Manufacturer should have Green Guard certificate along with products certifications like; AIOTA,INDIAN DESIGN MARK, BIFMA level 2 conforms to ANMSI/BIFMA Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015,ISO 14001:2018,ISO 50001:2018, ISO 13485:2016 is mandatory. Manufacturer should have Green Guard Certification for few of its products. All the ISO certificates should be obtained from NABCB (Central Govt.) accredited organization otherwise certificates will not be accepted.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Arrive Table Comprises of Main Desk , ERU and Pedestal (3600W x 1080D x 750H mm) as per following specification. The Main table shall be of size 3600 Width mm x 1080 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in Smart Case - space slides effortlessly in style.The mobile Pedestal shall be of size 480 Width mm x 640 Depth mm x 600 Height mm. Mobile pedestal shall be coated of MDF (medium density fiber ) with veneer coating and PU coating.The ERU Top shall be of MDF (medium density fiber) board duly finished with veneer and final PU coating. Size of ERU top 1900 Width mm x 480 Depth mm x 550(not from ground with castors).The main desk is provided eith the wire management system also there is perfect storage side unit . Manufacturer should have Green Guard certificate along with products certifications like; AIOTA,INDIAN DESIGN MARK, BIFMA level 2 conforms to ANMSI/BIFMA Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015,ISO 14001:2018,ISO 50001:2018, ISO 13485:2016 is mandatory. Manufacturer should have Green Guard Certification for few of its products. All the ISO certificates should be obtained from NABCB (Central Govt.) accredited organization otherwise certificates will not be accepted.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Impress Back Unit as per following specification. he Size of the Back unit shall be 2215mm width x 410 mm Depth x 2000mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. Below storage shall be provided with wooden shutters & the upper left & right side of the back unit shall also be provided with wooden shutters. The middle 3 door shutters should be of glass of minimum 5mm thick for display purpose. The hardness of the PU coating shall be 1.5H. Manufacturer should have Green Guard certificate along with products certifications like; AIOTA,INDIAN DESIGN MARK, BIFMA level 2, Level 3 conforms to ANMSI/BIFMA Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015,ISO 14001:2018,ISO 50001:2018, ISO 13485:2016 is mandatory. Manufacturer should have Green Guard Certification for few of its products. All the ISO certificates should be obtained from NABCB (Central Govt.) accredited organization otherwise certificates will not be accepted.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Halo Very High Back Chair as per following specification. The seat should be made up of 1.2 ± 0.1cm. thick hot pressed plywood and upholstered with leather and moulded Polyurethane Foam. The back foam should be designed with contoured lumber support for extra comfort. BACK SIZE is 53.0cm.(W) X 95.4cm.(H) SEAT SIZE is 54.6cm.(W) X 49.0cm.(D). The HR polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf for 25% compression. The seat and back should be arrested together with spine made of 0.8 ±0.05 cm thk HR Steel and should be black powder-coated ( DFT 40-60 microns ). The armrest assy. should comprise of three parts viz. the armrest support tube and P.U. armrest and the armrest top. The armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm M.S. E.R.W. support tubes and Chrome plated. The P.U. armrest should be made of black integral skin polyurethane with 50-70 shore 'A' Hardness and reinforced with M.S. insert. The armrest top should be made of ABS & upholstered with foam & leather. The mechanism should be designed with the following features: •360° revolving type. •Seat back tilting ratio of 1 : 1.5 •Front pivot for tilt with feet resting on ground ensuring more comfort. •Tilt tension adjustment. •5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock should be released. •Static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking. The height adjustment should have an adjustment stroke of 9.0 ± 0.3cm. The bellow should be 1 piece and blow moulded in black Polypropylene. The pedestal should be made of die-cast aluminium with buffing finish. It should be fitted with 5nos. twin wheel castor. The pedestal should be 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). The twin wheel castors should be injection moulded in black Nylon. Overall Dimensions of Chair, Seat Height - min 49.9 to max 58.9 cm. Total Height - min 134.9 to 143.9 cm. Width & Depth of Chair as measured from pedestal - Width 77 cm and Depth 77 cm. Manufacturer should have Green Guard certificate along with products certifications like; AIOTA,INDIAN DESIGN MARK, BIFMA level 2 conforms to ANMSI/BIFMA Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015,ISO 14001:2018,ISO 50001:2018, ISO 13485:2016 is mandatory. Manufacturer should have Green Guard Certification for few of its products. All the ISO certificates should be obtained from NABCB (Central Govt.) accredited organization otherwise certificates will not be accepted.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Nebula V3 3 Str. Sofa as per following specification. Upholestry: Synthetic. Filling Material: Foam. Dimension: W x H x D: 249 cm x 93 cm x 162.5 cm (8 ft 2 in x 3 ft x 5 ft 3 in)

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Nebula V3 1 Str. Sofa as per following specification. Upholestry: Synthetic. Filling Material: Foam. Dimension: W x H x D: 101 cm x 93 cm x 97.5 cm

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Bloom Corner Table as per following specification. Overall Size : Width : 60cm Depth : 60cm Height : 45cm. TABLE MATERIALS: Glass of 08 mm thk tempered, Solid rubber woood legs and frame, MS sheet as bottom shelf .DECORATION MATERIALS & SPECIFICATIONS: (DENSITY / TYPE): PU coating to the rubber wood parts, clear glass. Manufacturer should have Green Guard certificate along with products certifications like; AIOTA,INDIAN DESIGN MARK, BIFMA level 2 conforms to ANMSI/BIFMA Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015,ISO 14001:2018,ISO 50001:2018, ISO 13485:2016 is mandatory. Manufacturer should have Green Guard Certification for few of its products. All the ISO certificates should be obtained from NABCB (Central Govt.) accredited organization otherwise certificates will not be accepted.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Bloom Coffee Table as per following specification. Overall Size : Width : 100cm Depth : 65cm Height : 43cmTABLE MATERIALS: Glass of 08 mm thk tempered, Solid rubber woood legs and frame, MS sheet as bottom shelf .DECORATION MATERIALS & SPECIFICATIONS: (DENSITY / TYPE): PU coating to the rubber wood parts, clear glass. Manufacturer should have Green Guard certificate along with products certifications like; AIOTA,INDIAN DESIGN MARK, BIFMA level 2 conforms to ANMSI/BIFMA Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015,ISO 14001:2018,ISO 50001:2018, ISO 13485:2016 is mandatory. Manufacturer should have Green Guard Certification for few of its products. All the ISO certificates should be obtained from NABCB (Central Govt.) accredited organization otherwise certificates will not be accepted.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make MINGLE POD MEM PEBBLE _1150X1150 as per following specification. Worksurface: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing access flap provided for access to power supply and audio cables. Side Panel: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990 matching to the Worktop, Edge banded with matching 2 mm thick PVC lipping. Cutout with Gromet provided for routing cables in case any Audio Visual equipment is to be fixed later. Understructure: The Under-structure consists of an Inner Tube Assembly with Top for Worktop Mounting and Base plate with levellers. The Top Plate is made of 5mm thk hot rolled steel Plates (HR) (As per IS: 2062) & the bottom plate is made of 8mm thk hot rolled steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 25.4mmx 25.4mm x 1.2mm thk round electric resistant welded tube (ERW)(As per IS:7138) welded together using Tungsten inert gas welding. The whole structure is epoxy polyester powder coated (DFT 40-60 microns). The product has a knock-down construction. Cutout for standard Anchor Roma 6 Module is provided for electrical fittings.An additional cutout with a plate is provided for mounting Audio Visual Cables( eg HDMI,VGA-A,etc.). The 3D removable panels are provided for ease of servicibility. It also provides easy access to internal space in case of any Audio Visual equipment is to be added later. It is made of 1.2mm CRCA MS IS:513 and EPOXY POLYESTER Powder Coated (DFT 40-60 microns).

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Marvel High Back as per following specification. The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. The BACK SIZE: 47.7 cm. (W) x 76.4 cm. (D). The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.The adjustable tilting mechanism should be designed with the following features: • 360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.). The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Midas 2 seater sofa as per following specification. The Midas sofa should be a lounge seating system standing on beam with side frame assemblies. The LH/RH side frame should be fitted to the two ends of the seat/back mounting frame to form the leg assembly. It should be made of SS J4 Grade tube 0 4.44 cm. x 1.5mm thk. The seat/back mounting frame assy. holds the two side frames together. The mounting frames, 2nos should be used to connect the side frames. The mounting frame should be made of MS. E.R.W. tube 05.08±0.03cm. x 3.15±0.0252cm thk. black painted. The seat/back should be mounted on 4.0±0.03cm x 2.0±0.02cm x 0.2±0.016cm thk M.S. rectangular tube which should be welded on the beam of seat/back mounting frame. 3)SEAT/BACK ASSEMBLY: The seat/back assembly consshould be ts of 1.2±0.1cm thk plywood insert with Polyurethane foam having density = 45 +1- 2 Kg/m3 and hardness of the P. U. foam = 18 to 22 kg on Hampden m/c for 25% compression of the foam. The complete moulded seat/back assembly should be covered with a replaceable fabric upholstery cover. SEAT/BACK SIZE: 54.5 cm. (W)-x- 46.7cm. (D) x 12.5cm. (T). The side frames should be fitted with front and rear bottom shoes made of injection moulded polypropylene. The sofa should be upholstered with stain repellant "Velvetine plus" fabric as a standard offering. The velvet fabric can be vacuum cleaned in order to remove dirt & grit from the fabric surface. Upholstery covers made from Velvetine fabric should not be soap washed or dry cleaned.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Quartz Corner Table as per following specification. Dimensions W x H x D (cm) 45.9 x 53.5 x 35.6 / Primary Material: MDF/ Delivery Condition: Knock Down, Free Assembly Provided. Utilitarian Design:The table is designed keeping utility in mind. With it's freed up leg space, you can put a chair next to it and read while sipping on a cup of coffee. Wengue Finish:With its sleek Wengue finish, the table-top flaunts the warm aesthetics of wood, giving your table an added appeal. Sturdy Construct:Everything from MDF of 18mm thickness to an MS pipe understructure has been designed to add robustness to the table, making sure that it stays around for an extended period of time.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Pisa Center Table as per following specification. It should be 12 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It should be a welded Assembly made in SS202 grade having Dia. 12±0.04 as per should be :1762.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Mayfair 1350 Main Desk + Pedestal as per following specification. Mayfair Main Desk size shall be 1350 Width x 750 Depth x 750 Height.The Top shall be in white cedar and black and shall be 18 mm PLB with PVC lipping.The side panels shall be 18 mm thickPLT with PVC .The Modesty panel shall be 18 mm thick PLT.The Modesty panel shall be in a combination of black & white cedar. Mayfair Pedestal size shall be 390 Width x 435 Depth x 529 Height.The top is 18 mm thick PLB . The two drawer mobile pedestal is available in one size .The top and drawer fronts shall be in white cedar while the other components shall be in black.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Diva 7044T Visitor Chair as per following specification. 1. SEAT/BACK ASSEMBLY: The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA and back should be injection moulded from black Co-polymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam should be designed with contoured lumbar support for extra comfort. SEAT SIZE: 45.0cm(W) x 42.0cm.(D), BACK SIZE: 39.0cm(W) x 38.0cm.(H). SEAT & BACK COVERS: The seat and back covers should be injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45 +/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMREST ASSEMBLY (FOR 7044T): The armrests should be made of black integral skin Polyurethane wtih 50-70 Shore 'A' Hardness and reinforced with M.S. insert. The P.U. armrests should be then fixed to black powder-coated ( OFT 40-60 microns ) armrest brackets made of of 0.5 ± 0.05 cm. thk. HR steel and fitted with claddings made of injection moulded Polypropylene. FIXED TYPE mechanism: The fixed type mechanism should be without back tilt. TUBULAR FRAME: The tubular frame should be made up of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns)

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make ARISTO TBL 1650 with ERU 1200 + Pedestal as per following specification. Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Pulse Full Back Chair with Headrest as per following specification. 1.SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ± 0.1cm thk. hot pressed plywood OCP-QLTA-PL14-18.The Back should be made up of injection moulded glass filled nylon & upholstered using Net fabric with high tenacity yarn. SEAT SIZE: 47.0 cm. (W) x 51.5 cm. (D), BACK SIZE :45.0 cm. (W) x 65.3 cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf for 25% compression. ARMRESTS : The armrests have an Up-Down adjustment of 8.5 ± 0.5cm which should be provided in armrest structure. Armrest Top has an integrated layer of Thermoplastic Elastomer (TPE). LUMBAR SUPPORT ASSEMBLY: The Lumbar support consshould be ts of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height. FRONT PIVOT SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features: 360° revolving type, Single point control, Front-pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment. 4-position locking with anti-shock feature, Seat/back tilting ratio of 1:2. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia should be ∅66.1 ± 0.5 cm (76.1 ± 1.0 cm. with castors). TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black Nylon. The Neckrest assembly consshould be t of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. Neckrest should be fixed to Back Assembly through Neckrest connector. Neckrest assembly has height adjustment of 4.2 ± 0.5 cm and rotation adjustment of overall 76°± 2°. The complete neckrest assembly should be retro fit to the main chair

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make Oxbo Visitor Chair as per following specification. SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm. (W) x 60.5cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should be cantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube. Overall Dimensions of Chair: Seat Height - 46.5cm., Height - 93.5cm. Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm.

Supply ,Fitting & Fixing of BIFMA Level 2, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, SEFA10, SEFA8M, EN13150, EN14727, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified Godrej Make VSDU-8 as per following specification. Overall Dimensions of VSDU - 8 shall be 900mm(W)x450mm(D)x1830mm(H). The top shall be Metal top (1 mm add in unit height ) .The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - 'D' Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise .VSDU 8 shall have glass door for visibility of the content . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . VSDU - 8 shall have 4 no. of adjustable full shelves . Accessories optional shall be cradle with pipes for hanging godrej instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . For VSDU 8 - A4 size box file can be stored vertically on four shelves and clear space above fifth shelf is 220 mm .