Department Of Rural Development And Panchayats Tender

for Supply, Installation of Modular Work Stations along with Furniture for different floors of Joint Administrative Building, P&RD Office , at HC-7, HC Block, Sector-III, Saltlake, Kolkata-106.

Wish Recta Modular workstation 1200W x 600D with 3 drawer pedestal. Supply ,Fitting & Fixing of Godrej make BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manufacturer make Wish Recta Modular workstation 1200W x 600D with 3 drawer pedestal as per following specification. WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magneitc/fabric/fabric tackable/white board/glass writing board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic/fabric/laminated/prelam. SPLIT Tiles: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic/fabric tackable/white board/prelam/ plain metal along with split fabric magnetic/fabric tackable/white board/prelam/ plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in fabric/DL + Fabric/DL finsh. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in clear glass/fabric tackble /laminate/white board finsh. Side panels or legs - out of 25 mm thk prelam particle board with flat pvc lipping edge banding considered only on the open end conditions or metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding

Chair- Bravo High Back Chair: Supply ,Fitting & Fixing of Godrej make BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manufacturer make Bravo High Back Chair as per following specification. SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. The chair is available in three models. *PCH-9U01RG HIGH BACK SIZE 47.5 cm. (W) x 69.5 cm. (H) *PCH-9U02RG/9U12RG MID BACK SIZE 47.5 cm. (W) x 58.0 cm. (H). SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM (FOR 9U01RG/9U02RG): The mechanism is designed with the following features: · 360° revolving type. · 3 position locking · Tilt tension adjustment TUBULAR FRAME (FOR 9U12RG): The powder coated ( DFT 40-60 microns ) tubular frame is cantilever type & made of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube. PNEUMATIC HEIGHT ADJUSTMENT (FOR 9U01RG/9U02RG): The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY (FOR 9U01RG/9U02RG): The bellow is 3-piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY (FOR 9U01RG/9U02RG): The pedestal is injection moulded in black 33%glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. pitch-centre dia. (76.3 ±1.0cm with castors). TWIN WHEEL CASTORS (FOR 9U01RG/9U02RG): The twin wheel castors are injection moulded in Black Nylon. Overall Dimensions of Chair: WIDTH (W): 76.3 CM. DEPTH (D): 76.3 CM. HEIGHT (H): 97.0-109.0 CM. SEAT HEIGHT (SH): 42.5-54.5 CM