Department Of Rural Development And Panchayats Tender

4 Dr VFC Supply, Fitting & Fixing of Filing cabinet. Overall size shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in Filing cabinet. The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. It should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). The product must have in house test certificate. The product must have Indoor Advanatge Gold by SCS Certficate.Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

Storage rack 1200w with Glass Dooor with CAM Lock Supplying and placing and installation of Storage cabinet with glass door with CAM Lock for 1200W* 1950H Product Size - 2 Doors (LH and RH) for 1200W For 1200W storage-Each Door width should be of 598W. Construction & Material - Made from the combination of aluminium alloy (63400) extrusion and clear glass. Soft closing Hinge. Handle - Asthetically appealing handle made of Aluminum Cam Lock - -3 Way locking provision. - Click action mechanism. - Key removable in locked and unlocked positions. - Zinc alloy die cast housing. Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 80kg UDL for 1200W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) should be stored vertically on all loading levels . Number of files that should be stored in one shelf is as follows: 1200 w = 13 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). The product must have in house test certificate. The product must have GREENGUARD by UL and Indoor Air Quality by SCS Certficate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

Table RH 1650 x 750 Supplying and placing in position Main table of the following specifications. Overall Dimension - 1650x750x750 , Work Surface:Made of combination of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top and 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Softclosing access flap with in-build power box are provided on work surface for wire management. Modesty Panel:Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Under- structure:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. The product must have in house test certificate. .The product must have GREENPRO, GREENGUARD by UL,GRIHA and Indoor Advantage Gold by SCS Certficate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

TABLE T-104 Supplying and placing in position office table of the following specifications.Its size shall be 1665 Width x 900 Depth x 750 Height . The top panels shall be made from 25 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be sq. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic. The product must have in house test certificate.The product must have GREENPRO, GREENGUARD by UL, BIFMA LEVEL 2, GRIHA and Indoor Advantage Gold by SCS Certficate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

Chair High Back Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK SIZE : 47.5 cm. (W) x 77 cm. (D) ARMRESTS: The armrest top should be moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism should be designed with the following features: • 360° revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Polypropylene. Overall Dimensions of Chair Seat Height -44.5 to 54.5 cm. Height -114.0-131.5 cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm. The product must have in house test certificate. The product must have GREENPRO, GREENGUARD by UL, BIFMA LEVEL 2, GRIHA and Indoor Advantage Gold by SCS Certficate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

Glass Door Storwel Providing, supplying and placing of storage unit with glass door. Overall size Shall be 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It shall have a brass handle and a 2 way locking mechanism with shooting bolt . It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The product must have in house test certificate.The product must have Indoor Advantage Gold by SCS Certficate . Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

KD PLAIN WITH 4 SHELVES Providing, supplying and placing of storage unit. Overall size shall be 900mm(W)x450mm(D)x1830mm(H) . The construction shall be rigid knock down construction and Material used shall be prime quality CRCA steel - panels from 0.6 mm thick & front frame . Shelf shall be 0.8 mm thick .Configuration (Door) shall be full height steel hinged door . Locking shall be Plastic Recessed Handle cum Cam lock with 3 way locking mechanism with shooting bolt arrangement . Height wise adjustable shelf mounting , Uniformly distributed load capacity per each full shelf shall be 80 Kg maximum . For Plain 4 Nos. of adjustable full shelves . The top shall be metal and Epoxy Powder coated finish to the thickness of 50 microns . The product must have in house test certificate. The product must have GREENGUARD by UL Indoor Advantage Gold by SCS Certficate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

PLU MAIN 4 DR+1 add-on Digital Lock with envelope slot Providing, supplying and placing of Locker - 4 DOOR WITH ENVELOPE SLOT WITH DIGITAL LOCK Product Size - 375(W) x 470(D) x 1950*(H) each unit *Height including leveler * Height of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction.The add-on units should be stack widthwise to form a row of Lockers. Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 - CRCA 'D' Grade as per IS-513 Doors (With envelope slot) - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing hinge. Door should have envelope slot with cover made of plastic with label paper. Door size - For 4 Door locker - 373(W) X 18(T) X 473(H) Digital Lock - Keyless operation. - It is available for private and public mode. - Code finding from the front by recovery key. - Plastic housing. - Up to 4.2 billion combinations (for 16 digit password). - Support using power bank via micro USB slot. - Comes with fake code function. - 3 user levels: Owner, Admin and user Shelving - 7 Shelves for 4 Door locker with envelope slot Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). The product must have in house test certificate. The product must have GREENGUARD by UL, Indoor Advanatge Gold by SCS Certficate . Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

Visitor Chair Providing, supplying and placing of Visitor Chair. SEAT /BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D) Visitor TUBULAR FRAME: The tubular frame should be cantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should be connected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair Seat Height -44.8cm Height -98.2cm. Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.2 cm The product must have in house test certificate. The product must have GREENPRO, GREENGUARD by UL, BIFMA LEVEL 2, GRIHA and Indoor Advanatge Gold by SCS Certficate.Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

Executive (LC) HB Providing, supplying and placing of EXECUTIVE HIGH BACK CHAIR LEATHER. SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H) SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features : · Up-Down adjustment–7 steps (7.0 ± 0.5cm range) · It has to & fro movement along with Swivel adjustment. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 77.0 CM. DEPTH (D): 77.0 CM. HEIGHT (H): 110.5-120.5 CM. SEAT HEIGHT (SH): 44.5-54.5 CM. The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

25 Seater Conference Table Supplying and placing in position conference table of the following specifications with following size shall be 2 STR MAIN - 1350 x 710 x 740 2 STR SHARED - 1350 x 710 x 740 2 STR END_LH - 1350 x 710 x 740 2 STR END_RH - 1350 x 710 x 740 2350W - 2350 x 850 x 740 Work Surface-Made of 36mm thick MDFone side prelaminate board conforming to IS14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Full length access panel is provided with soft closing hinges inline with worktop edge. Worktop is available in various shapes. Understructure-The understructure consist of mixture of 18mm and 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Modesty-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Wire Management-An array of panels made of 0.8mm and 1.2 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Cutout for Standard Anchor Roma 4 module is provided for electrical fittings in Straight two seater and single seater modules below access flap per seat. AV Details-The table is equipped with Extron cables cubbies along with cable retractors as standard offering only for 1800mm head module, 2350mm head module, 150° head module and 165° head module. For straight two seater and single seater modules, provision to mount AV cables is provided (eg. HDMI,VGAA, etc). Only Corner 90°, 30° corner and 50° corner modules have provision for wire flow between adjacent tables. Additional Wirecover made of 0.8mm Thick CRCA, provided below worktop to conceal MicroAV Detailsphone wires running from table top to wire tray. The product must have in house test certificate. The product must have GREENPRO, GREENGUARD by UL,GRIHA and Indoor Advanatge Gold by SCS Certficate.Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

Visitor Chair Providing, supplying and placing of Visitor Chair. SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should be made up 1.2 ±0.1cm. thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should be designed with contoured lumber support for comfortable seating posture. MID BACK SIZE: 48.0cm.(W) X 64.5cm.(H) SEAT SIZE: 51.0cm.(W) X 48.0cm.(D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should be moulded with density = 45±2 kg/m³ and Hardness load 16 ± 2 kgf for 25% compression. ARMRESTS:The armrest top should be made of moulded polyurethane (P.U) and mounted on to a fixed type tubular armrest support which should be chrome plated Finish. FIXED BACKREST: The backrest consshould be ts of a fixed type mechanism i.e. no back up/down adjustment. FIXED SPINE : The seat and backare arrested together withfixed type spine i.e no backup/down adjustment ;made of 0.8 ± 0.05cm thk HR steel ans id back power-coated (DFT 40-60 micros). TUBULAR VISITOR FRAME :The tubular frame is cantilever structure & made of Dia 2.54 ± 0.03cm. X 0.2±0.016cm.thk . M.S. E.R.W. tube with a M.S. Spine mounting bracket welded to it. Back spine is fitted to the assembly. The frame finish is Nickel Chrome plated (15-20 microns). Overall Dimensions of Chair Seat Height - 47.7cm. Height - 93.0cm. Width & Depth of Chair as measured from pedestal - Width-66.5 cm and Depth-61.6 cm. The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

Sofa (2+1) Providing, supplying and placing of 3 seater sofa Net Weight (kg) 85 Dimensions W x H x D (cm) 179 x 85 x 83.5 Finish Color Cappuccino Sales Package 1 Sofa (Three Seater) Style Contemporary & Modern Seat Height (cm) 55 Wheels Included No.Primary Material Solid WoodDelivery Condition Knock Down Upholstery Material Leatherette Warranty 1 Year Warranty The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

Public Seating 3 seater 4 arms Providing, supplying and placing of public seating. SEAT SHELL : The Seat is made from high density self-skin Polyurethane foam reinforced with 1.2 mm M.S. perforated sheet insert. The Polyurethane foam having density of min. 350 kg/m3 with a Shore 'A' hardness of 60±10. SEAT SIZE : 52.0 cm (W) x 50.5 cm (D) BACK SHELL : The Back is made from high density self-skin Polyurethane foam reinforced with 1.2 mm M.S. perforated sheet insert.The Polyurethane Foam having density of min. 350 kg/m3 with a Shore 'A' hardness of 60±10. BACK SIZE : 52.0 cm (W) x 53.5 cm (H) CROSS BEAM : Cross Beam made up of Diamond shaped double wall Extrusion of Aluminum 6063-T6 Alloy with coated of 50 micron epoxy polyester coating and fitted with Polypropylene Copolymer engineering plastic end caps. CROSS BEAM SIZE : 11.3 cm (W) x 9.4 cm (H) X 0.4 cm (Thickness). LEG : Legs are made up of High pressure Aluminum ADC12 Die cast coated with 50 micron epoxy polyester coating, Leg Are fitted with soft grip PVC level adjusting shoes. ARMREST : Armrest are made up of High pressure Aluminum ADC12 die cast coated with 50 micron epoxy polyester coating. SEAT SUPPORT BRACKET Assembly : Seat support bracket assembly made up of argon shield welding of Hot Rolled Steel (IS: 2062) 0.3cm Thickness. This welded structure is coated with 50 micron epoxy polyester coating. CLAMPING BRACKET : Clamping bracket are made up of Hot Rolled Steel (IS: 2062) 0.3cm Thickness coated with 50 micron epoxy polyester coating.Overall Dimensions of Chair Seat Height - 42.5 cm. Height - 87.0 cm. Width-165.5cm and Depth-66.5 cm, The product must have in house test certificate.The product must have Indoor Advantage Gold by SCS Certficate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.

Center Table Providing, supplying and placing of Center Table: Dimensions W x H x D (cm) Overall Size : Width : 119.9cm Depth : 59.9cm Height : 45cm Primary Material - Plywood Finish Color - Walnut Maximum Load Capacity (kg) - 50 Wheels Included - No The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite.