Department Of Paschimanchal Unnayan Affairs Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Department Of Paschimanchal Unnayan Affairs - DPUA Tender
Civil And Construction
Road Construction
Eprocure
Opening Date7 Feb 2023
Closing DateCancelled
Tender Amount₹ 5,84,00,541
Costs
EMD
₹ 10,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Improvement Of Road Connectivity In Hirbandh
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_DPUA_468693_2Bid Award Id
ViewTender No
e-NIT No. 13/PUP/EC/BNK of 2022-23Tender Authority
Department Of Paschimanchal Unnayan Affairs ViewPurchaser Address
-Website
http://http://www.pupwb.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Construction of Subgrade and Earthen Shoulders
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1 for Rural Roads of MORD. (Borrow pit /pre work post work measurement)
4016.25
-
94.8
... More
B. By Mix in Place Method :
Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(ii) Grading – II 1st Layer
529.28
-
1645.27
... More
B. By Mix in Place Method :
Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(ii) Grading – II 2nd Layer
490.08
-
1645.27
... More
Supplying, spreading and consolidating Moorum to a depth of 75 mm at desired density and C.B.R. as per specification with power roller to proper gradient and camber including watering as necessary, and lighting, guarding, barricading and making adequate earthen bundh where necessary to protect the edges and curing with water for 2 to 3 days, mending cracks by rolling where necessary including all incidental charges of roller, cost of fuel & lubricants etc. complete as per specification
153
-
681.58
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
(ii) Grading-I Aggregate (63 mm to 45 mm) Using Stone Screening Type B (11.2 mm)
490.08
-
3168.87
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(iii)Grading - II aggregate (53mm to 22.4mm) Using
Stone Screening Type B (11.2 mm) for 75mm thickness.
B. Manual Means :
490.08
-
3199.49
... More
Prime Coat
Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
(i) For WBM / WMM Surface:
6534.38
-
33.14
... More
Tack Coat
Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
(ii) On Granular surfaces treated with primer (Using Bitumen emulsion at the rate of 0.25 to 0.30 kg per sqm.)
6534.38
-
10.26
... More
Open-Graded Premix Surfacing using Viscosity grade Paving Bitumen and HMP
Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by tipper trucks or by any other suitable arrangements, laying the mixture uniformly over the surface with paver finisher, including manual operations as and when required for proper line, grade and level to serve as wearing course on a previously prepared base, including mixing in Hot Mix Plant and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Hot Mix Plant and other machinery, pay of operators, cost of fuel and lubricants etc. complete as per Clause 510 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
6534.38
-
124.93
... More
Seal Coat
Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
6534.38
-
43.1
... More
Kilometre Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc.
(ii) Ordinary kilometer stone (precast)
3
-
1564
... More
Supplying, fitting and fixing R.C. Guard Post 1.37 m long with cement concrete 1:2:4 with graded stone chips of 13.2 mm down casting, curing complete including cost of providing 4 Nos. of 12 mm dia rod of length 1.54 m as main reinforcement and 6 Nos. of round shaped 8 mm dia rods used as binders ; the placing of the 1st binder should be at 75 mm below the top finished surface and the other 5 nos. of binders should be placed at 245 mm c/c; the guard post is of octagonal section with inscribed circle of diameter 24 cm at the base tapering to corresponding dimensions of 16 cm at the top including two coats of painting with best quality synthetic enamel paint of approved make and grade to form 6 nos. horizontal alternate bands in white / tannery yellow and black to 90 cm. length standing up above ground after mending good damages if any during striking off shuttering, making hole in ground of 47 cm depth and 30 cm minimum dia, fixing the guard post in the same holes and repacking the earth properly so as to keep the guard posts standing properly erect in correct position true to line and length including carriage of R. C. Guard Post with due care to the site including loading into the truck and unloading at site complete in all respect. With Pakur vareity stone chips.
400
-
698
... More
Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a
mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as perapproved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).iv)80 cm X 60 cm rectangle
10
-
5049
... More
Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a
mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as perapproved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)iii)60 cm circular
10
-
3591
... More
Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a
mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as perapproved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)ii)60 cm Equilaterall triangle
10
-
2652
... More
Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)..
2
-
9356
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
a) upto 3 m depth
(ii) With pumping out water excluding shoring
475.6
-
114
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge
32.8
-
642.25
... More
Providing and laying Design Mix concrete for plain /
reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and
grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation
of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork &
reinforcement works.(a) M-15 Grade Using concrete mixer.
49.2
-
5193.77
... More
Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of
plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per
specification and direction.
30.75
-
214
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
656
-
24
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including
screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost
and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control,sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A PCC Grade M20
420.25
-
6116.62
... More
Providing weep holes in brick masonary/ plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical Specifications.
158
-
115
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar
b) 20 mm thick plaster
750.25
-
153
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
750.25
-
34
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
a) upto 3 m depth
(ii) With pumping out water excluding shoring
572.24
-
114
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge
42
-
642.25
... More
Providing and laying Design Mix concrete for plain /
reinforced concrete work in any part of bridge
(excluding bottom plugging) with coarse
aggregates of appropriate nominal size and
grading, fine aggregate (sand) conforming to
proper grading zone, both of approved quality and
cement, as necessary, including labour, cost and
carriage of all materials and including preparation
of design mix, approval of the same by the
Engineer-in-Charge and cost for quality control,
sampling, testing etc. all complete but excluding cost of labour and materials for formwork &
reinforcement works.(a) M-15 Grade Using concrete mixer.
25.2
-
5193.77
... More
Hire and labour charges for Shuttering with or
without staging upto 4.0 m height using approved
stout props with wooden planks/ply wood/steel
sheet plate with required bracing for any kind of
plain or reinforced concrete works in all sorts of
minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction.
42.8
-
214
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
320.64
-
24
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by
the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A PCC Grade M20
219.28
-
6116.62
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A RCC Grade M30
32.4
-
6380.13
... More
Supplying, fitting and placing un-coated HYSD bar reinforcement in Bridge Foundation including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and directionof Engineer-in-charge (ii) (a) Tor Steel rods / HYSD bars / TMT bars
Other than above (Fe 415 /Fe 500 /Fe 500D, (9th Corri. P-1)
2.56
-
48571.84
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar
b) 20 mm thick plaster
58.4
-
153
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
58.4
-
34
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
a) upto 3 m depth
(ii) With pumping out water excluding shoring
69.52
-
114
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge
7.04
-
642.25
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A PCC Grade M20
36.28
-
6116.62
... More
Bedding for Pipe
i) Type A (Concrete Cradle) Bedding
Laying concrete cradle bedding with M15
Grade Cement Concrete as per Clause 1105 (i)
for Rural Roads of MORD
2.4
-
5350.77
... More
Providing and laying reinforced cement concrete pipe NP3 with spigot socket for culverts on first class bedding of granular material in single row including fixing with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106 for Rural Roads of MORD. (C) 600 mm dia
30
-
2857.84
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar
b) 20 mm thick plaster
82.84
-
153
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
82.84
-
34
... More
Construction of Bituminous Road from Nanda Adibasi Para to PMGSY Road of Aluyara Gram Under Hirbandh Block in the District of Bankura.
-
-
-
... More
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specifications Clause 201 for Rural Roads of MORD.
(II) By Manual Means
b) In area of thorny jungle
1.6
-
60286
... More
Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 for Rural Roads of MORD. (Mode of measurement: pre works and post works)
4320
-
85.6
... More
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1 for Rural Roads of MORD. (Borrow pit /pre work post work measurement)
9450
-
94.8
... More
Picking up and removing old bituminous layer or sand sealing coat from old black topped surface and cleaning the exposed surface by scraping and stacking the material as directed. (b) By mechanical means (without milling machine) :
(i) From 25 mm to 50 mm thick.
8400
-
22.6
... More
Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary.
(a) Depth up to 150 mm.
2940
-
14.4
... More
B. By Mix in Place Method :
Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(ii) Grading – II 1st Layer
599.63
-
1645.27
... More
B. By Mix in Place Method :
Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(ii) Grading – II 2nd Layer
507.38
-
1645.27
... More
Supplying, spreading and consolidating Moorum to a depth of 75 mm at desired density and C.B.R. as per specification with power roller to proper gradient and camber including watering as necessary, and lighting, guarding, barricading and making adequate earthen bundh where necessary to protect the edges and curing with water for 2 to 3 days, mending cracks by rolling where necessary including all incidental charges of roller, cost of fuel & lubricants etc. complete as per specification
360
-
681.58
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
(ii) Grading-I Aggregate (63 mm to 45 mm) Using
Stone Screening Type B (11.2 mm) for 75mm thickness
B. Manual Means :
507.38
-
3168.87
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(iii)Grading - II aggregate (53mm to 22.4mm) Using
Stone Screening Type B (11.2 mm) for 75mm thickness.
B. Manual Means :
1153.13
-
3199.49
... More
Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
(i) For WBM / WMM Surface: (with primer @ 0.70-1.0 kg/sqm)
15375
-
33.14
... More
Tack Coat
Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (i) On Bituminous Surface
(Using Bitumen Emulsion at the rate of 0.20 to
0.30 kg per sqm.)
15375
-
10.26
... More
Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD.
15375
-
124.93
... More
Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
I) By Mechanical Means
(i) With Hot Bitumen Binder (@ 6.80 kg / 10 sqm.)
15375
-
43.1
... More
Kilometre Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc.
(ii) Ordinary kilometer stone (precast)
5
-
1564
... More
Supplying, fitting and fixing R.C. Guard Post 1.37 m long with cement concrete 1:2:4 with graded stone chips of 13.2 mm down casting, curing complete including cost of providing 4 Nos. of 12 mm dia rod of length 1.54 m as main reinforcement and 6 Nos. of round shaped 8 mm dia rods used as binders ; the placing of the 1st binder should be at 75 mm below the top finished surface and the other 5 nos. of binders should be placed at 245 mm c/c; the guard post is of octagonal section with inscribed circle of diameter 24 cm at the base tapering to corresponding dimensions of 16 cm at the top including two coats of painting with best quality synthetic enamel paint of approved make and grade to form 6 nos. horizontal alternate bands in white / tannery yellow and black to 90 cm. length standing up above ground after mending good damages if any during striking off shuttering, making hole in ground of 47 cm depth and 30 cm minimum dia, fixing the guard post in the same holes and repacking the earth properly so as to keep the guard posts standing properly erect in correct position true to line and length including carriage of R. C. Guard Post with due care to the site including loading into the truck and unloading at site complete in all respect. With Pakur vareity stone chips.
260
-
698
... More
Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary,
mandatory and informatory sign as per IRC :67 made of
high intensity grade sheeting vide clause 801.3, fixed
over aluminium sheeting, 1.5 mm thick supported on a
mild steel angle iron post 75 mm x 75 mm x 6 mm
firmly fixed to the ground by means of properly
designed foundation with M15 grade cement concrete
45 cm x 45 cm x 60 cm, 60 cm below ground level as perapproved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).iv)80 cm X 60 cm rectangle
12
-
5049
... More
Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary,
mandatory and informatory sign as per IRC :67 made of
high intensity grade sheeting vide clause 801.3, fixed
over aluminium sheeting, 1.5 mm thick supported on a
mild steel angle iron post 75 mm x 75 mm x 6 mm
firmly fixed to the ground by means of properly
designed foundation with M15 grade cement concrete
45 cm x 45 cm x 60 cm, 60 cm below ground level as perapproved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)iii)60 cm circular
12
-
3591
... More
Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary,
mandatory and informatory sign as per IRC :67 made of
high intensity grade sheeting vide clause 801.3, fixed
over aluminium sheeting, 1.5 mm thick supported on a
mild steel angle iron post 75 mm x 75 mm x 6 mm
firmly fixed to the ground by means of properly
designed foundation with M15 grade cement concrete
45 cm x 45 cm x 60 cm, 60 cm below ground level as perapproved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)ii)60 cm Equilaterall triangle
12
-
2652
... More
Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)..
2
-
9356
... More
Dismantling of all type of concrete Dismantling of existing structures like culverts, bridges,retaining walls and other structure comprising of masonry, cement concrete, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specifications Clause 202 for Rural
Roads of MORD.(II) By Mechanical Means a) Cement Concrete
215.2
-
470
... More
Dismantling of all type of concrete Dismantling of existing structures like culverts, bridges,retaining walls and other structure comprising of masonry, cement concrete, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specifications Clause 202 for Rural
Roads of MORD.(II) By Mechanical Means b) Reinfofced Cement Concrete
30
-
773
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specifications Clause 202 for Rural Roads of MORD.
18
-
280
... More
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202 for Rural Roads of MORD.
15
-
154
... More
Providing and constructing service road of width 4.0 m to reach island location from one pier location to another pier location with height upto 1 m by sand / dry soil filled cement / polythene bags and removl of the same after main construction activity.
30
-
1365
... More
Earth Work in excavation of foundation of structure as per drawing and technical specification, including setting out, removing, spreading or stacking od spoils within a lead of 150 m as directed and including triming the sides of the treanches, leveling, dressing and ramming the bottom, and backfilling with approved material compltet as per direction of the Engineer- in -charge.
549.24
-
47
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. With good local sand free from earth in layers not exceeding 15 cm. Including inundating each layer by profuse water and poking and ramming layer complete including supplying of sand. Quality of sand is approved by Engineer-in-charge.
43.65
-
642.25
... More
Supplying and laying ploythene sheet (150gm/sq.m) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
168.2
-
24
... More
Providing and laying boulders apron on river bed
for protection against scour with stone boulders
weighing not less than 40 kg each complete as per
drawing and Technical specification. Boulder Laid
Dry Without Wire Crates.
136.22
-
2671.9
... More
Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works. M15 grade using concrete mixer
58.57
-
5193.77
... More
Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per
specification and direction.
107.63
-
214
... More
Plain/ Reinforced cement concrete in open foundation with or without reinforcements in any part of foundation of bridge / culverts with graded stone chips of appropriate nominal sizes, including screeing and cleaning of coarse aggregates, fine aggregates (sand) conforming to proper grading zones, both of approved quality and cement, as necessary, cost of curing of water, including cost & carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications. A) PCC Grade Concrete M20 I) Using Concrete Mixture.
91.66
-
6116.62
... More
Plain/ Reinforced cement concrete in open foundation with or without reinforcements in any part of foundation of bridge / culverts with graded stone chips of appropriate nominal sizes, including screeing and cleaning of coarse aggregates, fine aggregates (sand) conforming to proper grading zones, both of approved quality and cement, as necessary, cost of curing of water, including cost & carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications. D) RCC Grade Concrete M25 I) Using Concrete Mixture.
76.5
-
6327.96
... More
Supplying, fitting and placing un-coated HYSD bar reinforcement in Bridge Foundation including initial straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1mm in size and conforming to IS 280 at every intersection hooked & bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading ,unloading & carriage of all steel materials complete as per drawing and technical specification and direction of engineer-in-charge. (ii) (b) Tor Steel rods / HYSD bars / TMT bars
(JSW/JSPL/Shyam/SRMB/SSL/BMASL/Electrosteel) (Fe 415 /Fe 500 /Fe 500D, (9th Corri. P-1)
7.21
-
54202.79
... More
Plain/ Reinforced cement concrete in Sub-Structure with coarse aggregates of appropriate nominal sizes & grading, fine aggregates (sand) conforming to proper grading zones, both of approved quality and cement & water reducing admixture, as necessary, including labure, including cost & carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-charge, cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including cost of formwork & staging complete as per drawing and technical specifications. E. RCC Grade M25 (ii) Height up to 5m I) Using concrete mixture.
137.72
-
6638.96
... More
Supplying, fitting and placing HYSD bar reinforcement in sub-structure including initial straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1mm in size and conforming to IS 280 at every intersection hooked & bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading ,unloading & carriage of all steel materials complete as per drawing and technical specification and direction of engineer-in-charge. (ii) (b) Tor Steel rods / HYSD bars / TMT bars
(JSW/JSPL/Shyam/SRMB/SSL/BMASL/Electrosteel) (Fe 415 /Fe 500 /Fe 500D, (9th Corri. P-1)
12.97
-
54335.79
... More
Providing weep holes in brick masonary/ plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical Specifications.
60
-
115
... More
Painting the vertical end faces of posts, wheel guards or railing or parapet with alternate bands of different colours as direcred by the Engineer-in-charge with approved synthetic enamel paint.
429.95
-
99
... More
Back filling behind abutment, wing wall and return
wall complete as per drawing and Technical
specification. B) Sandy material
99.06
-
873
... More
Earth in filling in foundation trenches and at the back of abutment, wing walls etc,. With good earth (sandy soil) in layer not exceeding 15cm including watering and ramming layer by layer complete with earth obtained by fresh excavation from land arranged by the department beyond 150 m, but within 300 m, including all lifts. Earth to be approved by the Engineer -in-charge.
379.18
-
161
... More
Providing and laying cement concrete wearing coat M-30 Grade with graded stone chips 19 mm down incuilding screening and cleaning approved stone chips and sand as necessary laying, finishing complete to camber and grade, curinh with water, including cost and carrige of stone materials and hire charges for form work including reinforcement complete as per drawing & Technical specifications vide clause no 2702 of MORTH&H's specification for road & bridge Works.
13.12
-
9356
... More
Strip Seal Expansion Joint
Providing and laying of a strip seal expansion joint
catering to maximum horizontal movement upto 70
mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for
installation.
6.1
-
10000
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
a) upto 3 m depth
(ii) With pumping out water excluding shoring
139.2
-
114
... More
Sand filling in foundation trenches and at the back
of abutments, wing-walls etc. with good local sand
free from earth in layers not exceeding 15 cm.
including inundating each layer by profuse water
and poking and ramming layer by layer complete
including supply of sand. Quality of sand is to be
approved by the Engineer-in-charge
28.8
-
642.25
... More
Providing and laying Design Mix concrete for plain /
reinforced concrete work in any part of bridge
(excluding bottom plugging) with coarse
aggregates of appropriate nominal size and
grading, fine aggregate (sand) conforming to
proper grading zone, both of approved quality and
cement, as necessary, including labour, cost and
carriage of all materials and including preparation
of design mix, approval of the same by the
Engineer-in-Charge and cost for quality control,
sampling, testing etc. all complete but excluding cost of labour and materials for formwork &
reinforcement works.(a) M-15 Grade Using concrete mixer.
14.4
-
5193.77
... More
Hire and labour charges for Shuttering with or
without staging upto 4.0 m height using approved
stout props with wooden planks/ply wood/steel
sheet plate with required bracing for any kind of
plain or reinforced concrete works in all sorts of
minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per
specification and direction.
9
-
214
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
192
-
24
... More
Plain / Reinforced Cement Concrete in Open
foundation with or without reinforcements, in any
part of foundation of bridges / culverts with graded
stone chips of appropriate nominal sizes, including
screening and cleaning of coarse aggregates, fine
aggregate (sand) conforming to proper grading
zone, both of approved quality and cement, as
necessary, cost of curing with water, including cost
and carriage of all materials and including
preparation of design mix, approval of the same by
the Engineer-in-Charge, cost for quality control,
sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A PCC Grade M20
123
-
6116.62
... More
Providing weep holes in brick masonary/ plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical Specifications.
60
-
115
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar
b) 20 mm thick plaster
221
-
153
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
221
-
34
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
a) upto 3 m depth
(ii) With pumping out water excluding shoring
123.98
-
114
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water
and poking and ramming layer by layer complete including supply of sand. Quality of sand is to beapproved by the Engineer-in-charge
10.33
-
642.25
... More
Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used)
completes as per direction.
(a) Single brick flat soling (thickness 75 mm.)
137.75
-
294
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost
and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A PCC Grade M20
64.16
-
6116.62
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, includingscreening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A RCC Grade M30
5.99
-
6380.13
... More
Supplying, fitting and placing un-coated HYSD bar reinforcement in Bridge Foundation including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length
bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black
annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and directionof Engineer-in-charge (ii) (a) Tor Steel rods / HYSD bars / TMT bars
Other than above (Fe 415 /Fe 500 /Fe 500D, (9th Corri. P-1)
0.42
-
48571.84
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar
b) 20 mm thick plaster
420.8
-
153
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
420.8
-
34
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
a) upto 3 m depth
(ii) With pumping out water excluding shoring
429.18
-
114
... More
Sand filling in foundation trenches and at the back
of abutments, wing-walls etc. with good local sand
free from earth in layers not exceeding 15 cm.
including inundating each layer by profuse water
and poking and ramming layer by layer complete
including supply of sand. Quality of sand is to be
approved by the Engineer-in-charge
31.5
-
642.25
... More
Providing and laying Design Mix concrete for plain /
reinforced concrete work in any part of bridge
(excluding bottom plugging) with coarse
aggregates of appropriate nominal size and
grading, fine aggregate (sand) conforming to
proper grading zone, both of approved quality and
cement, as necessary, including labour, cost and
carriage of all materials and including preparation
of design mix, approval of the same by the
Engineer-in-Charge and cost for quality control,
sampling, testing etc. all complete but excluding cost of labour and materials for formwork &
reinforcement works.(a) M-15 Grade Using concrete mixer.
18.9
-
5193.77
... More
Hire and labour charges for Shuttering with or
without staging upto 4.0 m height using approved
stout props with wooden planks/ply wood/steel
sheet plate with required bracing for any kind of
plain or reinforced concrete works in all sorts of
minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per
specification and direction.
32.1
-
214
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
240.48
-
24
... More
Plain / Reinforced Cement Concrete in Open
foundation with or without reinforcements, in any
part of foundation of bridges / culverts with graded
stone chips of appropriate nominal sizes, including
screening and cleaning of coarse aggregates, fine
aggregate (sand) conforming to proper grading
zone, both of approved quality and cement, as
necessary, cost of curing with water, including cost
and carriage of all materials and including
preparation of design mix, approval of the same by
the Engineer-in-Charge, cost for quality control,
sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A PCC Grade M20
164.46
-
6116.62
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, includingscreening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A RCC Grade M30
24.3
-
6380.13
... More
Supplying, fitting and placing un-coated HYSD bar reinforcement in Bridge Foundation including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length
bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black
annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and directionof Engineer-in-charge (ii) (a) Tor Steel rods / HYSD bars / TMT bars
Other than above (Fe 415 /Fe 500 /Fe 500D, (9th Corri. P-1)
1.92
-
48571.84
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar
b) 20 mm thick plaster
43.8
-
153
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
43.8
-
34
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
a) upto 3 m depth
(ii) With pumping out water excluding shoring
86.91
-
114
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge
8.82
-
642.25
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A PCC Grade M20
45.35
-
6116.62
... More
Bedding for Pipe
i) Type A (Concrete Cradle) Bedding Laying concrete cradle bedding with M15 Grade Cement Concrete as per Clause 1105 (i)
for Rural Roads of MORD
3
-
5350.77
... More
Providing and laying reinforced cement concrete pipe NP3 with spigot socket for culverts on first class bedding of granular material in single row including fixing with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106 for Rural Roads of MORD. (C) 600 mm dia
37.5
-
2857.84
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar
b) 20 mm thick plaster
103.56
-
153
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
103.56
-
34
... More
Construction of Bituminous Road from Manbazar Road to Uganpathar Village via Bennagora Under Hirbandh Block in the District of Bankura.
-
-
-
... More
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specifications Clause 201 for Rural Roads of MORD.
(II) By Manual Means
b) In area of thorny jungle
1
-
60286
... More
Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 for Rural Roads of MORD. (Mode of measurement: pre works and post works)
2700
-
85.6
... More
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1 for Rural Roads of MORD. (Borrow pit /pre work post work measurement)
5906
-
94.8
... More
B. By Mix in Place Method :
Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(ii) Grading – II 1st Layer
778.36
-
1645.27
... More
B. By Mix in Place Method :
Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(ii) Grading – II 2nd Layer
720.7
-
1645.27
... More
Supplying, spreading and consolidating Moorum to a depth of 75 mm at desired density and C.B.R. as per specification with power roller to proper gradient and camber including watering as necessary, and lighting, guarding, barricading and making adequate earthen bundh where necessary to protect the edges and curing with water for 2 to 3 days, mending cracks by rolling where necessary including all incidental charges of roller, cost of fuel & lubricants etc. complete as per specification
225
-
681.58
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
(ii) Grading-I Aggregate (63 mm to 45 mm) Using
Stone Screening Type B (11.2 mm) for 75mm thickness
B. Manual Means :
720.7
-
3168.87
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(iii)Grading - II aggregate (53mm to 22.4mm) Using
Stone Screening Type B (11.2 mm) for 75mm thickness.
B. Manual Means :
720.7
-
3199.49
... More
Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
(i) For WBM / WMM Surface: (with primer @ 0.70-1.0 kg/sqm)
9609.38
-
33.14
... More
Tack Coat
Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (i) On Bituminous Surface
(Using Bitumen Emulsion at the rate of 0.20 to
0.30 kg per sqm.)
9609.38
-
10.26
... More
Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD.
9609.38
-
124.93
... More
Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
I) By Mechanical Means
(i) With Hot Bitumen Binder (@ 6.80 kg / 10 sqm.)
9609.38
-
43.1
... More
Kilometre Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc.
(ii) Ordinary kilometer stone (precast)
4
-
1564
... More
Supplying, fitting and fixing R.C. Guard Post 1.37 m long with cement concrete 1:2:4 with graded stone chips of 13.2 mm down casting, curing complete including cost of providing 4 Nos. of 12 mm dia rod of length 1.54 m as main reinforcement and 6 Nos. of round shaped 8 mm dia rods used as binders ; the placing of the 1st binder should be at 75 mm below the top finished surface and the other 5 nos. of binders should be placed at 245 mm c/c; the guard post is of octagonal section with inscribed circle of diameter 24 cm at the base tapering to corresponding dimensions of 16 cm at the top including two coats of painting with best quality synthetic enamel paint of approved make and grade to form 6 nos. horizontal alternate bands in white / tannery yellow and black to 90 cm. length standing up above ground after mending good damages if any during striking off shuttering, making hole in ground of 47 cm depth and 30 cm minimum dia, fixing the guard post in the same holes and repacking the earth properly so as to keep the guard posts standing properly erect in correct position true to line and length including carriage of R. C. Guard Post with due care to the site including loading into the truck and unloading at site complete in all respect. With Pakur vareity stone chips.
290
-
698
... More
Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary,
mandatory and informatory sign as per IRC :67 made of
high intensity grade sheeting vide clause 801.3, fixed
over aluminium sheeting, 1.5 mm thick supported on a
mild steel angle iron post 75 mm x 75 mm x 6 mm
firmly fixed to the ground by means of properly
designed foundation with M15 grade cement concrete
45 cm x 45 cm x 60 cm, 60 cm below ground level as perapproved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).iv)80 cm X 60 cm rectangle
14
-
5049
... More
Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary,
mandatory and informatory sign as per IRC :67 made of
high intensity grade sheeting vide clause 801.3, fixed
over aluminium sheeting, 1.5 mm thick supported on a
mild steel angle iron post 75 mm x 75 mm x 6 mm
firmly fixed to the ground by means of properly
designed foundation with M15 grade cement concrete
45 cm x 45 cm x 60 cm, 60 cm below ground level as perapproved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)iii)60 cm circular
14
-
3591
... More
Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary,
mandatory and informatory sign as per IRC :67 made of
high intensity grade sheeting vide clause 801.3, fixed
over aluminium sheeting, 1.5 mm thick supported on a
mild steel angle iron post 75 mm x 75 mm x 6 mm
firmly fixed to the ground by means of properly
designed foundation with M15 grade cement concrete
45 cm x 45 cm x 60 cm, 60 cm below ground level as perapproved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)ii)60 cm Equilaterall triangle
14
-
2652
... More
Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)..
2
-
9356
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
a) upto 3 m depth
(ii) With pumping out water excluding shoring
341.64
-
114
... More
Sand filling in foundation trenches and at the back
of abutments, wing-walls etc. with good local sand
free from earth in layers not exceeding 15 cm.
including inundating each layer by profuse water
and poking and ramming layer by layer complete
including supply of sand. Quality of sand is to be
approved by the Engineer-in-charge
35.04
-
642.25
... More
Providing and laying Design Mix concrete for plain /
reinforced concrete work in any part of bridge
(excluding bottom plugging) with coarse
aggregates of appropriate nominal size and
grading, fine aggregate (sand) conforming to
proper grading zone, both of approved quality and
cement, as necessary, including labour, cost and
carriage of all materials and including preparation
of design mix, approval of the same by the
Engineer-in-Charge and cost for quality control,
sampling, testing etc. all complete but excluding cost of labour and materials for formwork &
reinforcement works.(a) M-15 Grade Using concrete mixer.
52.56
-
5193.77
... More
Hire and labour charges for Shuttering with or
without staging upto 4.0 m height using approved
stout props with wooden planks/ply wood/steel
sheet plate with required bracing for any kind of
plain or reinforced concrete works in all sorts of
minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per
specification and direction.
32.85
-
214
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
700.8
-
24
... More
Plain / Reinforced Cement Concrete in Open
foundation with or without reinforcements, in any
part of foundation of bridges / culverts with graded
stone chips of appropriate nominal sizes, including
screening and cleaning of coarse aggregates, fine
aggregate (sand) conforming to proper grading
zone, both of approved quality and cement, as
necessary, cost of curing with water, including cost
and carriage of all materials and including
preparation of design mix, approval of the same by
the Engineer-in-Charge, cost for quality control,
sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A PCC Grade M20
448.95
-
6116.62
... More
Providing weep holes in brick masonary/ plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical Specifications.
158
-
115
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar
b) 20 mm thick plaster
757.43
-
153
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
757.43
-
34
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
a) upto 3 m depth
(ii) With pumping out water excluding shoring
92.34
-
114
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water
and poking and ramming layer by layer complete including supply of sand. Quality of sand is to beapproved by the Engineer-in-charge
7.7
-
642.25
... More
Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used)
completes as per direction.
(a) Single brick flat soling (thickness 75 mm.)
102.6
-
294
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost
and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A PCC Grade M20
47.79
-
6116.62
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, includingscreening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A RCC Grade M30
5.99
-
6380.13
... More
Supplying, fitting and placing un-coated HYSD bar reinforcement in Bridge Foundation including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length
bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black
annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and directionof Engineer-in-charge (ii) (a) Tor Steel rods / HYSD bars / TMT bars
Other than above (Fe 415 /Fe 500 /Fe 500D, (9th Corri. P-1)
0.42
-
48571.84
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar
b) 20 mm thick plaster
313.5
-
153
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
313.5
-
34
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
a) upto 3 m depth
(ii) With pumping out water excluding shoring
429.18
-
114
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge
31.5
-
642.25
... More
Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to
proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation
of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork &reinforcement works.(a) M-15 Grade Using concrete mixer.
18.9
-
5193.77
... More
Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction.
32.1
-
214
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
240.48
-
24
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded
stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading
zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A PCC Grade M20
164.46
-
6116.62
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded
stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading
zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A RCC Grade M30
24.3
-
6380.13
... More
Supplying, fitting and placing un-coated HYSD bar reinforcement in Bridge Foundation including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction
of Engineer-in-charge (ii) (a) Tor Steel rods / HYSD bars / TMT bars
Other than above (Fe 415 /Fe 500 /Fe 500D, (9th Corri. P-1)
1.92
-
48571.84
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar
b) 20 mm thick plaster
43.8
-
153
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
43.8
-
34
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
a) upto 3 m depth
(ii) With pumping out water excluding shoring
86.91
-
114
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge
8.82
-
642.25
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
A PCC Grade M20
45.35
-
6116.62
... More
Bedding for Pipe
i) Type A (Concrete Cradle) Bedding Laying concrete cradle bedding with M15 Grade Cement Concrete as per Clause 1105 (i)
for Rural Roads of MORD
3
-
5350.77
... More
Providing and laying reinforced cement concrete pipe NP3 with spigot socket for culverts on first class bedding of granular material in single row including fixing with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106 for Rural Roads of MORD. (C) 600 mm dia
37.5
-
2857.84
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar
b) 20 mm thick plaster
103.56
-
153
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
103.56
-
34
... More
ADD gst @18%
49001964.22
-
0.18
... More
Add Labour Welfare Cess @ 1%
57822317.78
-
0.01
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements