Department Of Fisheries Tender

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation. (b) 1:4:8 proportion

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. i) Pakur Variety

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 25 MM TO 30mm thick wooden shuttering as per Decision & Direction of EIC

A)250mm thick brickwork with 1st class in cement mortar (1:6) in foundation and plinth. GL to PL

B) 250mm thick brickwork in superstructure ground floor (1:6)

125mm thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/ staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] Inside-with 1:6 cement mortar & 15mm thick

Outside-with 1:6 cement mortar & 20mm thick

Ceiling-with 1:4 cement mortar & 10mm thick

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement. 25 mm thick

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Decorative textured (matt finish) or smooth finish Acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In ground floor.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) In ground floor.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) two coat

Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency] [White cement, Pigment to be supplied by the Agency] Area of each tile exceeding 0.6 sq.m but not excedding 1 sq.m.

Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5mm (± 0.2 mm) made out of single piece extruded PVC profile, with mitred cut joint sand joint with 2 nos. of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 mm x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The doorframe to be fixed to the wall using 8 x100mm long anchor fasteners complete, all as per manufacturer‟s specification and direction of Engineer -in- charge.

Providing & fixing factory made 30 mm thick factory made solid pvc door shutter made out of single piece extruded solid pvc profile . The style & rails shall be of size of 75 x 30 mm having wall thickness of 5 mm. The style and top bottom rail shall have one side a thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. 15 mm thickness shall be of single piece extruded solid pvc profile whereas it shall be not be made of sheet pasted ent, self tapping screw and braket of size 200 x 75 mm / welded at each corner. Single piece extruded solid pvc lockrail of size 100 x 30 mm with a wall thickness 5 mm & 15 mm integrally extruded in the middle of lockrail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturers specifications and direction of Engineer-in-Charge. Factory made Single piece non decorative extrude PVC profiles door shutter (mat/plain finish)

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. UPVC Pipe 110mm dia

Construction of circular soak well 2.5 meter deep in all types of sandy soils with dry upto dry bricks upto 1.6 meter from the bottom having 150 mm intermidiate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from the top with 20 mm thick cement plastering (1:4) to inside face..... with 250 mm thick cement dry brick work and 250 mm thick cement brick work (1:6) and 1.00 m inside dia. (SAIL/TATA/RINL)

supply of upvc pipes (B type) & fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Meter Length: (b) 110 mm

Do (ii) Plain tee (b) 110 mm

Door Bend (TS) (b) 110mm

Water Closets and Urinals:- Supply, fitting and fixing flat back urinal (half stall urinal) in white vitreous chainaware of approved make in position with brass screws on 75mmx75mmx75mm wooden blocks complete. (ii) 470mmx280mmx340mm

(A) For exposed Work, © (ii) 25 mm dia medium quality

(A) For exposed work, (d) (ii) 32 mm dia medium quality

(B) For concealed work, © 25mm dia. Medium quality

Supplying, fitting & fixing bib cock or stop cock. © (i) Chromium plated Bib Cock (angular) shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand)

SANITARY AND DRAINAGE WORKS- (B) (iii) WATER CLOSET AND URINALS- Supplying, fitting & fixing water closet in while glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete fro fixing) (ii) 530mmx410mm

ADD GST 18% on Sub Total Rs. 291003.817/-

Add CESS 1% on Sub Total Rs. 343384.504/-