Central Reserve Police Force Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Central Reserve Police Force - CRPF Tender
Civil And Construction
Building Construction
Electrical and Electronics
Electrical Works
Eprocure
Opening Date5 Feb 2025
Closing Date4 Mar 2025
Tender Amount₹ 2,65,00,195
Technical
Technical
Financial
Bid Capacity
... View More
To extract the bid capacity required in the given tender, we look at the financial requirements and formulas provided. The tender has an estimated cost, and the bid capacity required can be calculated based on this cost. Given the estimated cost is Rs. 2,65,00,195/-, the minimum average annual financial turnover of the tenderer during the last three years should be at least 30% of the estimated cost. Calculating 30% of the estimated cost: 0.3 * 2,65,00,195 = Rs. 79,50,058.50. Therefore, the bid capacity required is at least Rs. 79,50,058.50.
Technical Capacity
... View More
The required prior work experience for the bidder includes completion of similar works in a specific nature, with the following criteria:
- One similar completed work costing not less than 80% of the estimated cost.
- Or, Two similar completed works costing not less than 60% of the estimated cost.
- Or, Three similar completed works costing not less than 40% of the estimated cost. Specifically, for an estimated cost of Rs. 2,65,00,195, the required prior work experience includes: - one similar work with a value of at least 60% of Rs. 2,65,00,195 (i.e., Rs. 1,59,00,117),
- two similar works with a value of at least 60% of Rs. 2,65,00,195 (i.e., Rs. 1,59,00,117) for each work, or - three similar works with a value of at least 40% of Rs. 2,65,00,195 (i.e., Rs. 1,06,00,078) for each work. The work completion certificate should be issued by an authority not below the rank of Executive Engineer. The bidder should have completed these works during the last 05 financial years, although some sources mention the last 03 financial years.
Costs
EMD
₹ 5,30,004Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
I. Special Repair And Renovation Of Administrative Building Office And Ii. Special Repair / Replacement Of Old Existing Wiring And Necessary Electrical Fitting Of Adm Building At Wbs Hqr Crpf, Kolkata
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CRPF_847660_1Tender No
B.V(WBS HQr) Spl.Repair/2024-25-CZ-C/Cell (NIT-17)Tender Authority
Central Reserve Police Force ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits 50 mm thick
54
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
1128.4
-
-
... More
Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 200mm wide
113
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
8.49
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor
V level. Cement mortar 1:4 (1 cement :4 coarse sand)
141.75
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm
147.93
-
-
... More
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type 1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with :Decorative veneer facings of approved manufacture
81.65
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
24
-
-
... More
Providing and fixing 2nd class teak wood plain lining tongued and grooved,including wooden plugs complete with necessary screws and priming coat on unexposed surface. 12 mm thick
121.4
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
768
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material &labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
571.22
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood
1.04
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
25.2
-
-
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 100x60x2.50 mm
280
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm
70
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
67
-
-
... More
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
67
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws
etc. complete : 300x16 mm
28
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
56
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick
252
-
-
... More
Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment).
68.04
-
-
... More
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge
17.7
-
-
... More
Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
52.11
-
-
... More
Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete.
100
-
-
... More
Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete.
500
-
-
... More
Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc.
with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)
148.63
-
-
... More
Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.200 mm
42
-
-
... More
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makarana white second quality
178.07
-
-
... More
25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class deodar wood
36.12
-
-
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently
and easily. Glazed vitrified floor tiles polished finish of size Size of Tile 600 x 600 mm
387.24
-
-
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently
and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm
174.11
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/
sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
31.38
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter
50
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
100
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm
25
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm
60
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend
25
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend
60
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal expansion. 75 mm "P" trap
60
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal expansion. 110 mm "P" trap
60
-
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped powder coated galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for
all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
434.93
-
-
... More
12 mm cement plaster : 1:6 (1 cement : 6 coarse sand)
436.32
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
426.04
-
-
... More
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.
121.6
-
-
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
2735.69
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2486.47
-
-
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats
4972.95
-
-
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface
having VOC content less than 50 grams/litre
4972.95
-
-
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
7708.63
-
-
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand)
230.4
-
-
... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-inCharge.
27
-
-
... More
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin- Charge. Internal Work- Exposed on wall
162
-
-
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick
25
-
-
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
5.48
-
-
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
23.32
-
-
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below
84
-
-
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
174.11
-
-
... More
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
178.07
-
-
... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 150 mm dia pipe
120
-
-
... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
27
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing including 1.5" wooden outer frame bidding. Rectangular shape 453x357 mm
37
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing including 1.5" wooden outer frame bidding. Rectangular shape 1500x450 mm
6
-
-
... More
Providing and fixing toilet paper holder : C.P. brass
27
-
-
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe
100
-
-
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
21
-
-
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
18
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.Internal Work 20 mm nominal dia Pipes
243
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 40 mm nominal dia Pipes
243
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
70
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
4000
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
27
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
10
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
90
-
-
... More
Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia
27
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
535.71
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
228.04
-
-
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. Pre-laminated particle board with decorative lamination on both sides
21.66
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
86.52
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
243.41
-
-
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.
138.07
-
-
... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 75mm average thickness
169.29
-
-
... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 50mm average thickness
190
-
-
... More
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter
1820
-
-
... More
Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia.
320
-
-
... More
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
359.29
-
-
... More
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer- in-Charge Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument. 50mm thick in Grade M 25 with cement content not less than 330 kg per cum
190
-
-
... More
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive
strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria]
including the cost of centering and shuttering at edges and corners etc. as directed by Engineer- in-Charge Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal
instrument. 75mm thick in Grade M 25 with cement content not less than 330 kg per cum
169.29
-
-
... More
Providing corrugated G.S sheet roofing including vertical / curved surface fixed with polymer coasted J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, includig a coat of approved steel primer and two coats of approved paint on overlaping of sheets complete (up to any pitch in horizontal/vertical ro curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. , 0.63mm thick with zinc coating ot less than 275 gm/sqm.
30
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
264.88
-
-
... More
Providing Fixing ,Installation ,Testing, Commissioning of white plastic hand dryer ( mm) with Wall fittings, High quality power with all accessories including connections etc. as required(size 240x230x240 mm)
27
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass railing for stair case including 40mm dia baluster and 50 mm dia hand rail of SS 304 grade with required all assesaries, all complete as per direction of engineer incharge.
87.6
-
-
... More
Providing & fixing work station desk for single user with 19mm solid ply ISI marked, all front sides pasting with sunmica-DECORATIVE LAMINATION SHEET , 1 no. drawer, along with lock & key with brass handle, 1 no. table cabinet , all edges point area covered by wooden molding bit, 1 no. key board channel type tray, 1no. CPU tray, painting all inside areas with synthetic enamel, including all complete. Make: Greenply/Centuryply
335.2
-
-
... More
Providing & fixing wall mounting file cabinet - 19mm commercial waterproof ply ISI marked along with decorative laminated sheets(1mm thikness) of all sides and back side covered by 12mm thickness ply with all necessary fittings fixures-auto hinges, fevicol, tower bolt, lock and others), painting all inside of cabinets with synthetic enamel, including all complete. Make: Greenply/Centuryply
457.9
-
-
... More
Providing Fixing ,Installation and Testing of CP Brass (Chrome Finish) Health Faucet set with all fittings, High quality with all accessories including connections etc. as required.
27
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings including CRPF sand blast logo specification/size all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
46.43
-
-
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for glass doors including necessary cutting and making good etc. complete.
12
-
-
... More
Providing and applying of powder coatting paint for aluminum windows including disassemble of windows and assemble after complete of powder coating with EPDM rubber and wool pile replaced where required.
2520
-
-
... More
Providing and fixing toughen glass with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the glass in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
12.6
-
-
... More
Providing and fixing factory made WPC door frame (100x62mm) inculuding 30 mm thick door shutter made of WPC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin-charge
34.4
-
-
... More
Providing and fixing wash basin with C.I. brackets of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required white Vitreous China Surgeon/Counter top type wash basin of size 660x460 mm with 15 mm C.P. brass swan neck pillar taps with elbow including operated levers
24
-
-
... More
Providing and fixing SS foldable towel rack complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour size 600Lx600Wx300H mm long folding towel rack for multi functional use.
36
-
-
... More
Providing and fixing PVC roller for replacement of existing aluminum sliding window with necessary screws etc. complete.
1600
-
-
... More
Providing and fixing automatic Sensor sliding Glass door machine including necessary cutting and making good etc. complete. (Excluding toughen glass cost)
2
-
-
... More
Wiring for light / fan / cabin fan /exhaust fan / call bell point with 1.0 sq mm FRLS PVC insulated copper single core cable in surface / recessed medum class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0 sqmm FRLS PVC insulatad copper conductor single core cable etc. Wall including fixing of ISI marked ceiling rose / Batten holder and mending good damages to original finish ( wire brand Finolex/ Rajnigandha/Mescab).& modular type switch (Havells /Philips /Anchor ) Group (A) Light /Fan/Cabin fan /call bell/exhaust fan wiring ( Average 4 mtr)
145
-
-
... More
Wiring for light / fan / cabin fan /exhaust fan / call bell point with 1.0 sq mm FRLS PVC insulated copper single core cable in surface / recessed medum class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0 sqmm FRLS PVC insulatad copper conductor single core cable etc. Wall including fixing of ISI marked ceiling rose / Batten holder and mending good damages to original finish ( wire brand Finolex/ Rajnigandha/Mescab).& modular type switch (Havells /Philips /Anchor ) Group (B) Light /Fan/Cabin fan /call bell/exhaust fan wiring ( Average 7 mtr)
80
-
-
... More
Wiring for light / fan / cabin fan /exhaust fan / call bell point with 1.0 sq mm FRLS PVC insulated copper single core cable in surface / recessed medum class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0 sqmm FRLS PVC insulatad copper conductor single core cable etc. Wall including fixing of ISI marked ceiling rose / Batten holder and mending good damages to original finish ( wire brand Finolex/ Rajnigandha/Mescab).& modular type switch (Havells /Philips /Anchor ) Group © Light /Fan/Cabin fan /call bell/exhaust fan wiring ( Average 10 mtr)
59
-
-
... More
Wiring for light / fan / cabin fan /exhaust fan / call bell point with 1.0 sq mm FRLS PVC insulated copper single core cable in surface / recessed medum class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0 sqmm FRLS PVC insulatad copper conductor single core cable etc. Wall including fixing of ISI marked ceiling rose / Batten holder and mending good damages to original finish ( wire brand Finolex/ Rajnigandha/Mescab).& modular type switch (Havells /Philips /Anchor )
6
-
-
... More
Wiring for A/C / power plag with 2x4 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medum class PVC conduit alongwith 1 no 4 sq mm FRLS PVC insulated copper conductor single core cable for loop earthing as requird.
200
-
-
... More
Wiring for circuit / sub-main wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 x 1.5 sq mm + 1 x 1.0 sq mm earth wire
1500
-
-
... More
Wiring for circuit / sub-main wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 x 2.5 sq mm + 1 x 1.5 sq mm earth wire
1000
-
-
... More
Wiring for circuit / sub-main wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 x 4 sq mm + 1 x 2.5 sq mm earth wire
200
-
-
... More
Wiring for circuit / sub-main wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 x 6 sq mm + 1 x 4 sq mm earth wire
100
-
-
... More
Wiring for circuit / sub-main wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 x 10 sq mm + 1 x 6 sq mm earth wire
100
-
-
... More
Wiring for circuit / sub-main wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 4 x 6 sq mm + 2 x 4 sq mm earth wire
60
-
-
... More
Wiring for circuit / sub-main wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 4 x 10 sq mm + 2 x 6 sq mm earth wire
60
-
-
... More
Rewiring for light / fan / cabin fan /exhaust fan / call bell point with 1.0 sq mm FRLS PVC insulated copper single core cable and surface / recessed medum class PVC conduit and earthing the point with 1.0 sqmm FRLS PVC insulatad copper conductor incuding dimantling as required. Group (A) Light /Fan/Cabin fan /call bell/exhaust fan wiring ( Average 4 mtr)
70
-
-
... More
Rewiring for light / fan / cabin fan /exhaust fan / call bell point with 1.0 sq mm FRLS PVC insulated copper single core cable and surface / recessed medum class PVC conduit and earthing the point with 1.0 sqmm FRLS PVC insulatad copper conductor incuding dimantling as required. Group (B) Light /Fan/Cabin fan /call bell/exhaust fan wiring ( Average 7 mtr)
50
-
-
... More
Rewiring for light / fan / cabin fan /exhaust fan / call bell point with 1.0 sq mm FRLS PVC insulated copper single core cable and surface / recessed medum class PVC conduit and earthing the point with 1.0 sqmm FRLS PVC insulatad copper conductor incuding dimantling as required. Group © Light /Fan/Cabin fan /call bell/exhaust fan wiring ( Average 10 mtr)
31
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface / recessed PVC Conduit as required. 1 Pair
50
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface / recessed PVC Conduit as required. 2 Pair
30
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface / recessed PVC Conduit as required. 4 Pair
20
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit alongwith accessories in surface / recess inculuding cutting the wall and making good the same in case of recessed conduit as required. 20 mm Medium class PVC conduit
500
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit alongwith accessories in surface / recess inculuding cutting the wall and making good the same in case of recessed conduit as required. 25 mm Medium class PVC conduit
300
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit alongwith accessories in surface / recess inculuding cutting the wall and making good the same in case of recessed conduit as required. 35 mm Medium class PVC conduit
100
-
-
... More
Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 Amp switch
50
-
-
... More
Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 2 way 6 Amp switch
6
-
-
... More
Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15 Amp switch
10
-
-
... More
Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 6 Amp socket outlet
10
-
-
... More
Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 Amp socket outlet
10
-
-
... More
Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet / Computer socket outlet
8
-
-
... More
Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet
8
-
-
... More
Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Bell push
4
-
-
... More
Supplying and fixing two module stepped type electronic fan regulator on the exiclding modular plate switch box incuding connections but excluding modular plate as required.
60
-
-
... More
Supplying and fixing module blanking plate on the exiclding modular plate & switch box excluding modular plate as required.
10
-
-
... More
Supplying and fixing following size / modules, G.I. box alongwith modular base & cover plate for modular switches inrecess etc. as required. 1 or 2 Module
10
-
-
... More
Supplying and fixing following size / modules, G.I. box alongwith modular base & cover plate for modular switches inrecess etc. as required. 3 Module
20
-
-
... More
Supplying and fixing following size / modules, G.I. box alongwith modular base & cover plate for modular switches inrecess etc. as required. 4 Module
10
-
-
... More
Supplying and fixing following size / modules, G.I. box alongwith modular base & cover plate for modular switches inrecess etc. as required. 6 Module
10
-
-
... More
Supplying and fixing following size / modules, G.I. box alongwith modular base & cover plate for modular switches inrecess etc. as required. 8 Module
20
-
-
... More
Supplying and fixing following size / modules, G.I. box alongwith modular base & cover plate for modular switches inrecess etc. as required. 12 Module
10
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 Amp modular socket outlet and 5/6 Amp modular switch connections etc, as required.
20
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 & 15/16 Amp modular socket outlet and 15/16 Amp modular switch connections etc, as required.
6
-
-
... More
Installation of exhaust fan in the existiong opening including making good the damage, conection, testing, commissioning etc. as required. Upto 450 mm sweep
6
-
-
... More
Painting of ceiling fan in installed position with one or more coats of spray painting with synthetic enamel paint of approved brand.
22
-
-
... More
Supplying and drawing of UTP 4pair CAT 6 LAN Cable in the existing surface / recessed PVC conduit as required.. 1 run of cable
30
-
-
... More
Supplying and drawing of UTP 4pair CAT 6 LAN Cable in the existing surface / recessed PVC conduit as required.. 2 run of cable
30
-
-
... More
Supplying and drawing of UTP 4pair CAT 6 LAN Cable in the existing surface / recessed PVC conduit as required.. 3 run of cable
30
-
-
... More
Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos 3 pin 6 Amp modular socket outlet and 2 nos 6 Amp modular switch connections etc. as required.
160
-
-
... More
Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 25 Amp modular socket outlet and 25 Amp modular SP MCB "C" curve including connections etc. as required.
62
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board 240 V on surface / recess, complete with tinned copper bus bar neutral bus bar & earthing bar inrecess etc. as required.( But without MCB/RCCB/Isolator ) 6 way Double door
6
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board 240 V on surface / recess, complete with tinned copper bus bar neutral bus bar & earthing bar inrecess etc. as required.( But without MCB/RCCB/Isolator ) 8 way Double door
6
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board 240 V on surface / recess, complete with tinned copper bus bar neutral bus bar & earthing bar inrecess etc. as required.( But without MCB/RCCB/Isolator ) 16 way Double door
3
-
-
... More
Supplying and fixing following ways surface / recess mounting vertical type 415 V TPN MCB distribution board of sheet steel dust protected duly powered painted inclusive of 200A tinned copper bus bar common neutral link earth bar din bar for mounting MCBs complete with tinned copper bus bar neutral bus bar & earthing bar inrecess etc. as required.( But without MCB/RCCB/Isolator ) 4 way ( 4+12) Double door
3
-
-
... More
Supplying and fixing following ways surface / recess mounting vertical type 415 V TPN MCB distribution board of sheet steel dust protected duly powered painted inclusive of 200A tinned copper bus bar common neutral link earth bar din bar for mounting MCBs complete with tinned copper bus bar neutral bus bar & earthing bar inrecess etc. as required.( But without MCB/RCCB/Isolator ) 8 way ( 4+24) Double door
3
-
-
... More
Supplying and fixing 5 to 32 Amp rating 240/415v 10kA "C" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissionona etc. as required. Single Pole
150
-
-
... More
Supplying and fixing 5 to 32 Amp rating 240/415v 10kA "C" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissionona etc. as required. Single Pole & neutral
12
-
-
... More
Supplying and fixing 5 to 32 Amp rating 240/415v 10kA "C" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissionona etc. as required. Double pole
3
-
-
... More
Supplying and fixing following rating four pole 415V residual current circuit breaker RCCB having a sensitivity current 30mA in the existing MCB DB complete with connections testing and commissioning etc. as required. 40 A
3
-
-
... More
Supplying and fixing following rating four pole 415V residual current circuit breaker RCCB having a sensitivity current 30mA in the existing MCB DB complete with connections testing and commissioning etc. as required. 63 A
3
-
-
... More
Supplying and instailing following size of perforated Hot Dipped Galvanised Iron cable trays ( Galvanised thickness not than 50 microns ) with perforation not more than 17.5% in convenient section, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolt & nuts Painting suspenders etc as required. 100 mm width x 50 mm depth x 1.6 mm thickness
170
-
-
... More
Supplying and instailing following size of perforated Hot Dipped Galvanised Iron cable trays ( Galvanised thickness not than 50 microns ) with perforation not more than 17.5% in convenient section, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolt & nuts Painting suspenders etc as required. 150 mm width x 50 mm depth x 1.6 mm thickness
80
-
-
... More
Supplying and instailing following size of perforated Hot Dipped Galvanised Iron cable trays ( Galvanised thickness not than 50 microns ) with perforation not more than 17.5% in convenient section, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolt & nuts Painting suspenders etc as required. 225 mm width x 50 mm depth x 1.6 mm thickness
50
-
-
... More
Supplying and instailing following size of perforated Hot Dipped Galvanised Iron cable trays ( Galvanised thickness not than 50 microns ) with perforation not more than 17.5% in convenient section, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolt & nuts Painting suspenders etc as required. 300 mm width x 50 mm depth x 1.6 mm thickness
30
-
-
... More
Supply, Installation and connection of Busbar chamber with electrolitic copper busbar 800 amps of suitable size to match with the existing panel enclosed in a sheet steel synthetic stove enamelled painted enclosure along with 2 Nos. 320A, 4 Pole, 415 Volts 35 KA, MCCB (Micro processor based) with Sheet steel synthetic stove enamelled painted enclosure and the completet set to be installed on M.S. painted angle and grouted on floor.
1
-
-
... More
Earthing with G.I. earth pipe 3.2 metre long 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal / coke and salt) as required.
4
-
-
... More
Supplying and laying 6 SWG G.I. wire at 0.30 metre below ground level for conductor eath electrode including connection termination with GI thimble etc. as required.
30
-
-
... More
Supply 1100 V grade XLPE/PVC insulated AL armoured cables as per IS:7098. of following size 2 core 25 sqmm cable
80
-
-
... More
Supply 1100 V grade XLPE/PVC insulated AL armoured cables as per IS:7098. of following size 2 core 35 sqmm cable
1
-
-
... More
Supply 1100 V grade XLPE/PVC insulated AL armoured cables as per IS:7098. of following size 4 core 25 sqmm cable
1
-
-
... More
Supply 1100 V grade XLPE/PVC insulated AL armoured cables as per IS:7098. of following size 3.5 core 25 sqmm cable
100
-
-
... More
Supply 1100 V grade XLPE/PVC insulated AL armoured cables as per IS:7098. of following size 3.5 core 35 sqmm cable
1
-
-
... More
Supply 1100 V grade XLPE/PVC insulated AL armoured cables as per IS:7098. of following size 3.5 core 50 sqmm cable
50
-
-
... More
Supply 1100 V grade XLPE/PVC insulated AL armoured cables as per IS:7098. of following size 3.5 core 70 sqmm cable
50
-
-
... More
Supply 1100 V grade XLPE/PVC insulated AL armoured cables as per IS:7098. of following size 3.5 core 95 sqmm cable
1
-
-
... More
Supply 1100 V grade XLPE/PVC insulated AL armoured cables as per IS:7098. of following size 3.5 core 120 sqmm cable
50
-
-
... More
Supply 1100 V grade XLPE/PVC insulated AL armoured cables as per IS:7098. of following size 3.5 core 150 sqmm cable
1
-
-
... More
Supply 1100 V grade XLPE/PVC insulated AL armoured cables as per IS:7098. of following size 3.5 core 185 sqmm cable
1
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation sand cushloning protective covering and redilling the thench etc.as required. Upto 35 sq mm
70
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation sand cushloning protective covering and redilling the thench etc.as required. Above 35 sq mm and upto 95 sq mm
1
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation sand cushloning protective covering and redilling the thench etc.as required. Above 95 sq mm and upto 185 sq mm
1
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation sand cushloning protective covering and redilling the thench etc.as required. Upto 35 sq mm
110
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation sand cushloning protective covering and redilling the thench etc.as required. Above 35 sq mm and upto 95 sq mm
100
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation sand cushloning protective covering and redilling the thench etc.as required. Above 95 sq mm and upto 185 sq mm
50
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation sand cushloning protective covering and redilling the thench etc.as required. Above 185 sq mm and upto 400 sq mm
1
-
-
... More
Supplying and making end termination with brass compression gland and aluminlum lugs for following size of PVC insulated and PVC aheathed / XLPE aluminlum conductor cable of 1.1 KV grade as required. 2 x 25 sq mm ( 22 mm)
1
-
-
... More
Supplying and making end termination with brass compression gland and aluminlum lugs for following size of PVC insulated and PVC aheathed / XLPE aluminlum conductor cable of 1.1 KV grade as required. 2 x 35 sq mm ( 25 mm )
1
-
-
... More
Supplying and making end termination with brass compression gland and aluminlum lugs for following size of PVC insulated and PVC aheathed / XLPE aluminlum conductor cable of 1.1 KV grade as required. 3.5 / 4 x 25 sq mm (28 mm)
1
-
-
... More
Supplying and making end termination with brass compression gland and aluminlum lugs for following size of PVC insulated and PVC aheathed / XLPE aluminlum conductor cable of 1.1 KV grade as required. 3.5 x 35 sq mm (32 mm)
1
-
-
... More
Supplying and making end termination with brass compression gland and aluminlum lugs for following size of PVC insulated and PVC aheathed / XLPE aluminlum conductor cable of 1.1 KV grade as required. 3.5 x 50 sq mm (35 mm)
1
-
-
... More
Supplying and making end termination with brass compression gland and aluminlum lugs for following size of PVC insulated and PVC aheathed / XLPE aluminlum conductor cable of 1.1 KV grade as required. 3.5 x 70 sq mm (38 mm)
1
-
-
... More
Supplying and making end termination with brass compression gland and aluminlum lugs for following size of PVC insulated and PVC aheathed / XLPE aluminlum conductor cable of 1.1 KV grade as required. 3.5 x 95 sq mm (45 mm)
1
-
-
... More
Supplying and making end termination with brass compression gland and aluminlum lugs for following size of PVC insulated and PVC aheathed / XLPE aluminlum conductor cable of 1.1 KV grade as required. 3.5 x 120 sq mm (47 mm)
1
-
-
... More
Supplying and making end termination with brass compression gland and aluminlum lugs for following size of PVC insulated and PVC aheathed / XLPE aluminlum conductor cable of 1.1 KV grade as required. 3.5 x 150 sq mm (50 mm)
1
-
-
... More
Supplying and making end termination with brass compression gland and aluminlum lugs for following size of PVC insulated and PVC aheathed / XLPE aluminlum conductor cable of 1.1 KV grade as required. 3.5 x 185 sq mm (57 mm)
1
-
-
... More
Supplying and fixing of light, fan, Cabin fan & exhaust fan etc. of following the approved brand. fixture & fitting 2x9 W LED recessed mirror optic light fixture
1
-
-
... More
Supplying and fixing of light, fan, Cabin fan & exhaust fan etc. of following the approved brand. fixture & fitting 1x11 W LED Decorative light fixture
1
-
-
... More
Supplying and fixing of light, fan, Cabin fan & exhaust fan etc. of following the approved brand. fixture & fitting 1x20 W LED Tube Decorative light fixture
1
-
-
... More
Supplying and fixing of light, fan, Cabin fan & exhaust fan etc. of following the approved brand. fixture & fitting 1x35 W LED Decorative light fixture IP-68
1
-
-
... More
Supplying and fixing of light, fan, Cabin fan & exhaust fan etc. of following the approved brand. fixture & fitting 1x70 W LED Street light fixture with braket
1
-
-
... More
Supplying and fixing of light, fan, Cabin fan & exhaust fan etc. of following the approved brand. fixture & fitting 18" Cabin fan
1
-
-
... More
Supplying and fixing of light, fan, Cabin fan & exhaust fan etc. of following the approved brand. fixture & fitting 48/56" Ceiling fan
1
-
-
... More
Supplying and fixing of light, fan, Cabin fan & exhaust fan etc. of following the approved brand. fixture & fitting 250 mm exhaust fan
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%