Central Mechanical Engineering Research Institute Tender

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

Above 35 sq. mm and upto 95 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

3½ X 25 sq. mm (28mm)

3½ X 95 sq. mm (45mm)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Wiring for circuit / sub main wiring alongwith earthwire with the following sizes of FRLS PVC insulated, copper conductor, single core cable in surface / recessed steel conduit as required.

2 x 1.5 sq. mm.+ 1x 1.5 sq. mm earth wire

2 x 2.5 sq. mm.+ 1x 2.5 sq. mm earth wire

2 x 6 sq. mm.+ 1x 6 sq. mm earth wire

4 x 6 sq. mm.+ 2x 6 sq. mm earth wire

4 x 10 sq. mm.+ 2x 6 sq. mm earth wire

4 x 16 sq. mm.+ 2x 6 sq. mm earth wire

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. For 4 way, Double door TPN MCBDB

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Triple pole and neutral

Supply and Fixing of Mounting rail for TLED lamps luminaire along with lamp, clamp, nut bolt and all accessories for fixing wall/trust mounting, connection, testing, commissioning as required. (TMC 501 P 1xT-LED 22W P3241 of Philips or equivalent.)

Supply and Fixing of Road lighting 40W luminaire with high power LED light source and IP 66 protection including extension pipe L shape, clamp, nut bolt and all accessories for fixing wall/trust mounting, connection alongwith 3x1.5 sq.mm FRLS PVC insulated copper conductor single core wire, testing, commissioning as required. (BRP 331 LED 48 CW R5N PC PSU S1 SPD of Philips, Signify. or equivalent.)

Providing & fixing of Sheet steel encloser with 1 no. 6 to 32 Amp, 'C' curv-10 KA, FP MCB and Din Channel for installing it including connection & body earthing complete as required.

Providing & fixing of Sheet steel encloser with 1 no. 63 Amp, 'C' curv-10 KA, FP MCB and Din Channel for installing it including connection & body earthing complete as required.

Providing & fixing of Sheet steel encloser suitable for 1 no. 125 Amp, 16 KA, FP MCCB for installing it including connection & body earthing complete as required.

Supply, Fixing (at existing panel), Testing & commissioning of 200 Amp, 25 KA, FP MCCB with Spreaders- 1 set and rotary type handle including connection & termination complete as required. The work is inclusive of Dismaintaling of one no 125A FP MCCB and refixing the same panel in out going feeder as required.

Supply of 1.1 KV grade XLPE insulated, PVC seathed, Aluminium conductor armoured power cables conforming to IS 7098 ( Part - 1) 1988 and ISI marked of following sizes.

3.5 x 95 sq mm A2XFY cable.

3.5 x 25 sq mm A2XFY cable.

Supply Installation Testing and commissioning front operated indoor cubical type free standing MV panel, suitable for operation on 415V, three phase, 4wire, 50 HZ, AC supply system. The panel shall be fabricated out of 14 SWG CRCA sheet steel with necessary anti-corrosive tretment and shall be dust and vermin proof construction suitable for installation on floor with the following facilities. a) Fire and corrosion resistant coating similar to VIPER FR-1101 applied in two coats with necessary primer. b) Fire retardant DMC/SMC fillings for openings around bus bar near the sectional barriers. c) Facilities in the terminals to have direct termination with aluminium cables. d) Shall have high mechanical dielectric strength. e) Door inter locking facility with rotary type handle. f) Shall have fire barriers. g) Switch body shall be made of fire retardant materials/heat insulating materials. h) Shall be painted with heavy coat of anti corrosive paint. I) TPN MCBS shall not be fixed in more than 2 Nos. in each compartment. j) Panel name as well as Feeder name to be indicated. k) Provition of Top and Bottom cable entry. The panel shall consisting of the followings. Incoming: 160A Thermal magnetic releases four pole MCCB 16 kA with rotary type handle.-1Set. (Model 420017 & 420160 of Legrand or equivalent.) Bus Bar: 250A TPN Aluminium Bus bar (insulated).-1Set. Outgoing: 125A Thermal magnetic releases four pole MCCB 16 kA with rotary type handle.- 1 Set, 63 Amp, 'C' curv-10 KA, FP MCB - 4 Sets, 32 Amp, 'C' curv-10 KA, FP MCB - 4 Sets, Metering: Multifunction Meters with 3 line LED display and 200/5A CTs - 1set. Phase indication lamps with fuse and control -3 Sets.

Dismantaling all the unserviceable electrical accessories, light fittings, power point, LT panels DB, switch board, wiring, cable, conduit etc. As per direction of Engg.-in-Charge.

Supply and fixing of 1phase, 450mm Sweep, Heavy duty (920 rpm) Exhaust fan with suitable Louvers/Shutter, nut-bolt as required. (Orient or equivalent.)

Supply and fixing of 400 mm sweep, 230 Volt, white Aerodynamic blade and Hi-torque motor gives hi-air thrust wall mounted fan with Oscillation and speed control by pull cord system, connection, testing and commissioning etc. as required. (Wall 44 White of Orient or equivalent.)