Central Mechanical Engineering Research Institute Tender

Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete.

Supplying and laying In Ground Floor: Sizes-300 mm x300 mm x15 mm true to line and level Tactile Finish Scratch re-sistant, Neutral to UV rays, Non-fade, High Slip Resistant Full Body Vitrified Tiles conforming to IS:15622-2006 & IS :4457- 2007 and tested in accordance with IS :13630 [Non- modular sizes for tiles with Skid resistance: 0.6, Mohr's hardness 7.0, Staining resistance: Class-1, Water Absorption E 0.5%], MOR 38N/sq.mm & Breaking strength 4000 N for Outdoor area of building e. g. Driveway, Pathway, Pavements, Parking lots, Sloping ramps, Entrance lobbies, Patios, Portico, swimming pool enclosure, Bus Passenger Shed & directing visually impaired persons, set over necessary underlay and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles and removal of wax coating of top surface of tiles with warm water and cleaning the tiles using soft and dry cloth complete including the cost of materials, labour and all other incidental charges complete including backside slurry but excluding the cost of underlay and true to the manufacturer's specification anddirection of Engineer-in-Charge.

Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. (a) Single brick flat soling (thickness 75 mm.)

Supplying and fixing in position vertical blinds (Vista (levelor) made with 100 mm wide fabrics of approved quality, make and shade assembled on top aluminium frame (33 mm x 28 mm x 1.2 mm) with powder coated (approx 50 micron) with high quality nylon runners with auto clutch mechanism, stainless steel master runners, stainless steel fitter chains and PVC end covers. The bottom end of the fabrics are suspended with a weight which are to be connected by link chains. All complete as per manufacturer's specifications. Rate should including 3" overlaping of fabrics beyond the window/curtain wall opening all complete as per direction with all labour and materials (Measurement to be made on the opening size).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work