Border Security Force Tender

Supplying and installation of UPVC Column Pipe of medium duty, 1.25" dia ( OD 42 mm and DN 32 mm), 3 mtr length of each pipe with one side socket and one side threaded suitable for 2 HP submersible pump.( Prince, supreme, Ashirvad, Finolex, Surya, Astral make)

Supplying and laying of PVC Insulated and PVC Sheathed 3 Core 2.5 Sqmm Flat Submersible Cable with Copper Conductor for Submersible motor Pump with voltage Grade upto 1100 Volts as per IS:694/1990 i/c connections etc as required(Polycab/ Havells /KEI/ RR Kabel/Finolex)

Supplying and fixing MS powder coated clamp for holding of column pipes 40 mm dia complete with bolt nut washer etc complete etc as reqd.

Providing and fixing of 8 mm dia galvanized steel wire rope along with U clamp for the safety of 2 HP submersible pumping system.

Supplying and Laying of one number XLPE insulated PVC sheathed power cable of 1.1 KV grade of 2 x 10 sqmm size Aluminum armoured cable direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Havells/Polycab/RR Kable/Finolex/KEI

Supplying and laying of one number XLPE insulated PVC sheathed power cable of 1.1 KV grade of 2 x 10 Sqmm size in the existing RCC/ HUME/ METAL pipe as required. Make-Havells/Polycab/RR Kabel/Finolex/KEI

Providing, Installation, Testing and commissioning of out door type totally enclosed weather proof feeder panel with sloping canopy top of suitable size ( minimum size 600mm x 600mm x 350mm ) to accommodate following switchgears and accessories, fabricated from 14 SWG/2 mm thick CRCA sheet suitable for 230 volts, 50 Hz A.C. supply with gland plate, hinged front openable double leaf doors and locking arrangement, including Backelite plate & dinbar to be fixed inside for mounting of switches and starters. The feeder pillar shall be powder painted with approved shade, including connection / interconnections with FRLS PVC insulated copper conductor single core cable of suitable size etc. complete as required. The feeder pillar shall be supplied with suitable pedestal of 35mm x 35 mm x5 mm angle iron frame with 600 mm long legs . The feeder pillar shall be mounted on suitable brick / cement concrete foundation 30 cms. below ground level and 30 cms. above ground including finishing etc. complete as required.

Fabrication of Feeder pillar size 600mm x 600mm x 350mm made of 2 mm thick CRCA sheet i/c welding,painting,locking arrangement with suitable backelite sheet & dinbar

40 Amp DP MCB 10 KA - 01 No make C&S/L&T/Havells

32 Amp DP MCB 10 KA - 02 Nos make C&S/L&T/Havells

DOL starter suitable for single phase 2 HP submersible pump-01 make C&S/Crompton/Havells/L&T

Supplying of standby single phase 2 HP vertical submersible motor pump set, 220 Volts 50 HZ including starter, make KSB/Kirloskar/Crompton or equivalent

Applicable Rate of GST@18% in place of 12 % on DSR 2022 (MF@1.0633) on items