Border Security Force Tender

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (4 way (4 + 12), Double door)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Single pole)

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.. (63 amps)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.(5 x 6 sq. mm)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.(25 mm)

Supplying and fixing of AC Three Phase Trivector Meter DLMS Compliance of Accuracy Class 1.0, 3 X 240V, 50Hz, with Backlit LCD Display of rating 20-100A. (Measures & Trivector energy, V, I, kW, PF, Hz, Last month history of kWh & MD in kW) with special features like TOD, Tamper logging, Optical & RS232 Communication. Port & Display in absence of Power. in the existing panel box complete with connections, testing and commissioning etc. as required.

S.I.T.C of outdoor type feeder pillar, dust and vermin proof made out of 2 mm thick CRCA sheet of nominal size 1100 mm x1000 mm and up to 450 mm deep, double door front and back openable- hinged type door, duly eposy based powder coated (from inside and outside), provision of 4 nos 200 amp aluminium bus bar for incoming and outgoing cables and fixed on M S angle iron frame work of size 50 mmx 50 mmx 5 mm length with 4 nos. 1200 mm long legs duly welded to the frame structure and out of which 300 mm will be grouted in 1:2:4 cement concrete foundation i/c supply and fixing of following accessores, connection and interconnection, inter locking wiring, thimbling, numbering-ferrules up & lowering system, earthing stud complete as reqd. a) Main incomer 415 V, 160 Amp TPN SDFU : 02 Nos. b) Outgoing 415 V, 100 Amp TPN SDFU : 02 Nos c) Outgoing 415 V , 63 Amp, TPN SDFU : 02 Nos

S.I.T.C of outdoor type feeder pillar, dust and vermin proof made out of 2 mm thick CRCA sheet of nominal size 800 mm x700 mm and up to 450 mm deep, double door front and back openable- hinged type door, duly eposy based powder coated (from inside and outside), provision of 4 nos 200 amp aluminium bus bar for incoming and outgoing cables and fixed on M S angle iron frame work of size 50 mmx 50 mmx 5 mm length with 4 nos. 1200 mm long legs duly welded to the frame structure and out of which 300 mm will be grouted in 1:2:4 cement concrete foundation i/c supply and fixing of following accessores, connection and interconnection, inter locking wiring, thimbling, numbering-ferrules up & lowering system, earthing stud complete as reqd. a) Incoming 415 V, 100 Amp TPN SDFU : 01 Nos b) Outgoing 415 V , 63 Amp, TPN SDFU : 04 Nos

SITC of Indoor wall mounted panel compartmentalized and cubical type size 750 mm x 450 mm x 300 mm double door suitable for 415 Volt, 3 phases, 50 Hz made out of 2mm thick CRCA sheet with required hardware duly painted with powder coated .Panel having separate detachable gland plate, hinged door with locking arrangement, earth bar/stud, (approved by Engg in charge) heavy duty connectors/ terminals for three phase cable connections for TPN SDFU etc complete as required.Panel should have following instruments mounted on it. (Panel should be as per design & drawing approved by Engg in charge). .a) IIncomin 415 V, 100 Amp TPN SDFU : 01 Nos

Supplying and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 x 35 sq mm aluminium armoured conductor including DWC/HDPE/HUME /METAL pipe direct in the existing masonry open duct/Air/on wall as required. Make Havells/polycab/ Finolex/KEI ( 3.5 X 35 sqmm)