Bidhan Chandra Krishi Viswavidyalaya Tender

Twin Pulper for extracting pulp from Mango : Contact Parts need to be fabricated from 304 type stainless steel materials- one unit for Coarse and other for fine sieving. Supporting Structure will be made from mild steel Angles and plates. Two nos nylon brush in each section need to be included with a Sieve of 1/8 mesh in coarse section and 1/32 in fine section, made from stainless steel. Operated by 440 volts three phase AC Main, by 2 Motors of 2 + 1 HP. Capacity : Approx 200 Kg per hour

Hydraulic Juice Press for crushed Pineapple, Guava etc. : 25 tonnes pressure, rack and cloth type, with synthetic cloth and wooden racks. Tray covered with aluminium sheet, complete with 2 HP motor and hydraulic pump with automatic pressure control. Complete with 8 racks and 8 cloths.

Steam Jacketed Kettle, Stationary Type, with mechanical Agitator : Double walled model, Pan will be fabricated from 3 mm thick and Jacket also will be fabricated from 3 mm thick 304 type stainless steel sheet, properly welded to withstand working steam pressure. All joints need to be Argon welded and polished. Supporting structure will be made from stainless steel pipe framed structure. The Kettle will be equipped with 2 HP motor operated agitating system. The rod and shaft will also be made from 304 quality stainless steel rod and flat bar. Product outlet will be provided at bottom with 1.5” stainless steel ball valve. Brimful Capacity : 225 litres

Transfer Pump : All contact parts will be made of 316 quality stainless steel materials, operated by 0.5 HP three phase AC motor. Supply needs to be completed with Food Grade PVC pipe.

Steam Jacketed Pan, with Stirrer for Sugar Syrup Preparation : Double walled model, Pan will be fabricated from 3 mm thick and Jacket will be fabricated from 3 mm thick 304 type stainless steel sheet of 304 grade, properly welded to withstand maximum 2 Kg/cm2 working steam pressure. All joints need to be Argon welded and polished. Supporting structure needs to be made from mild steel pipe framed structure. The Pan will be equipped with 1 HP motor driven stirring system. The rod and shaft will also be made from 304 quality stainless steel rod and flat bar. Product outlet will be provided at bottom with 1.0” stainless steel ball valve. Brimful Capacity : 150 litres

Sugar Syrup Cooling System : This unit will consist of : i. Stainless steel Pump, to feed sugar syrup, operated by 1.0 HP 440 volts three phase AC Motor, with AC Drive to control feeding- one. ii. Shell and Tube type Heat exchanger, made from 304 type Stainless Steel tubes in tube, all joints argon welded and polished For cold process-one iii. Stainless steel tank of 400 liters capacity, having refrigeration system By Hermetically sealed adequate capacity Compressor, with its components and copper cooling coil widely distributed inside the tank, is provided to circulate cold water to cool down the temperature of syrup-one iv. Water circulating pump, operated by 1 H.P. motor-two

Filter Press for Sugar syrup filtration : All contact parts will be made of 304 type stainless steel materials. Supporting structure will be made from mild steel pipe, covered with stainless steel sheet.6 bed of 8” dia each, operated by 1 H.P. motor and stainless steel gear pump. Capacity-200 LPH

Sugar Syrup StorageTank : The tank needs to be fabricated from 304 type stainless steel sheet of 1.5 mm. thickness, properly argon welded on all joints and polished. Capacity of the Tank : 500 liter.

Transfer Pump : All contact parts will be made of 316 quality stainless steel materials, operated by 0.5 HP three phase AC motor. Supply needs to be completed with Food Grade PVC pipe.

Stainless Steel Blending Tank, fitted with Stirrer for Juice Line : Inner chamber needs to be fabricated from 304 grade stainless steel of 1.5mm thick, having bottom of Conical Shape. Motor Base will also be made from 304 grade stainless steel angle framed base.. Stirrer will be made from 304 grade stainless steel rod and stainless steel flat thick pati. Supporting Structure need to be made from heavy duty 4 nos stainless steel pipe, provided with heavy duty wheels for easy movement. Motor – 1 HP 440 volts three phase AC Main, having cover of stainless steel sheet. Product Outlet with stainless steel pipe of 1” dia fitted with stainless steel ball valve. All joints needs to be argon welded and polished. Brimful Capacity of the Tank : 200 liter.

Homogenizer (Double stage) for Homogenizing fruit juice/ pulp : Will come with three pistons for efficient functioning. All parts of head fabricated in stainless steel (food grade). Will come with pressure gauge of 6000 psi. Liquid whirling homogenizing head needs to be designed to provide maximum homogenizing effect. Counter shaft driven by electric motor. Easy to clean without dismantling the head Powered by 1.5HP motor of single phase AC only. Easy to operate, user friendly having wide variety of applications. Juice transfer pumps. Capacity : 150 liters/hr (LPH)

Juice Pasteuriser, Tube in Tube system : Tube in Tube system, Capacity-100 LPH This unit will consist of : i. Stainless steel Tank for Pulp of capacity 200 liter – One. ii. Stainless steel Pump, to feed pulp, operated by 1 HP 440 volts three phase AC Motor, with AC Drive to control feeding – One iii. Stainless steel tank of 400 liters capacity, connected with Steam line from the existing boiler, to circulate water through pump to Shell and Tube type Heat Exchanger, for hot process. - One iv. Shell and Tube type Heat exchanger, made from 304 type Stainless Steel tubes in tube, all joints with argon welded and polished For hot process. – Two. v. Shell and Tube type Heat exchanger, made from 304 type Stainless Steel tubes in tube, all joints with argon welded and polished. For cold process. – One. vi. Stainless steel tank of 400 liters capacity, to circulate water through pump to Shell and Tube type Heat Exchanger, to cool down Pulp temperature at required level - One vii. Water circulating pump, operated by 1 H.P. motor. – One viii. Interconnecting Steam line, Pressure Gauge, Safety Valve- One lot.

Semi Automatic Bottle Washing Machine : Equipped with 0.5 HP Motor operated pump connected with 4 Rinsers. Supply needs to be completed with 2 Nos Stainless Steel Vat of 200 Litres Capacity – One for Detergent Water and other for Fresh Water.

Stainless Steel Turn Table – 20” Dia : Dia- 20 inches, Contact parts will be fabricated from Stainless steel materials, supported on Mild steel angle framed structure. Operated by 1 HP Motor.

Automatic Two Head Stroke Type Bottle Filling Machine : Complete with Stainless steel slat conveyor, Stainless steel Guide Rail, Stainless steel Syringes, 2 nos Stainless steel Filling Nozzles, Electric Motor, Gear Box, Electric Panel Box, Cover, etc. Machine needs to be supplied along with change parts suitable for 200ml, 500ml and 700ml Round Bottle. Power : 1 H.P. AC single Phase 220 V Motor for Main Machine. ½ H.P. AC Motor for Conveyor Drive. Capacity: 200ml. to 700 ml. Round Bottles . Output : 720 to 780 bottles of 200 ml Capacity per hour

Single Head Rotary Screw Cap Sealing Machine : Complete with Single Screw Capping Head, Cap Dispensing Device and Chute, S.S. slat Conveyor, S.S. Guide rail, Gear Box, Motor, Star Wheel for Feeding and Discharging and for the Sealing Position, Head Up & Down System by Gear Box and Motor, External Panel Box, Pick and Place Arrangement of Caps etc. The main Housing Box will be made of C.I. and M.S. Cladding with S.S. Machine needs to be supplied along with the change parts suitable for 200ml, 500ml and 700ml Round Bottle. Power : 1.0 HP AC 220 Volt single Phase Motor Capacity : 200 ml to 700 ml Round Bottles. Output : 720 to 780 bottles of 200 ml Capacity per hour

Shrink Tunnel : Suitable for sealing PP/PVC Shrink Film. Separate controls for Heater/Cooler fan, gives good and perfect shrink seal. Machine design should be robust & long-working life. Tunnel Machine size : 800 L x 200mm W x 300mm H. Sealing Speed : 0 to 10 meter/minute. Feeding weight : 30 Kg max. Complete with extended in and out conveyor of Slat mild steel chain. Total Length of the Conveyor will be 2 Meter including tunnel length, operated by 1 HP motor and controlled by VFD.

Inkjet Printing Equipment : With Conveyor

Stainless Steel collection vessel : Suitable for collection and on process storing of pulp/ juice, etc. Fabricated from 304 type stainless steel sheet, all joints argon welded and polished. Capacity : 200 litres ( 18 swg thick body and 20 swg lid)

Reverse Osmosis Method Water Plant –250 liters/hour : Type of the Plant : i.) Iron Removal Filter :Complete with Pipe lines, Valves, Strainers, Bed Plate, CFM and Gravels etc. ii.) Activated Carbon Filter with Pipe lines, Valves, Strainer, Bed Plate, Graded Gravels and Activated carbon. iii.) Reverse Osmosis Plant. iv.) Reverse Osmosis Membrane. v.) Housing. vi.) High Pressure Pump. vii.) Dosing Pump. viii.) Big Blue Housing. ix.) R.O. Stainless steel pipe lines. x.) Rotameter. xi.) Pressure Gauge. xii.) Conductivity Meter. xiii.) Panel Board. xiv.) R.O. Fully Auto System. xv.) Ultra-Violet System. xvi.) Ozonizer. xvii) Water Softener with Pipe lines, Valves, Nozzles, Bed Support Plate, High Capacity Resin.

Automatic Steam Boiler – Horizontal model : Scope of Supply : Feed-Water Side : • Feed water pump with motor, v-belt and pulley mounted on the skid. • Feed water piping from feed water pump upto boiler inlet. • Feed water pump pressure gauge with dampening cock. • Feed water pressure relief valve. • Non-Return valve at feed water pump discharge.• Strainer for feed water pump.• Temperature indicator for feed water. • Magnetic level switch for protection against No/Low water level. Fuel Side : * Monobloc, fully automatic HSD/LDO fired burner. Mounting & Fittings • Main steam stop valve, flanged at steam header. • By-pass steam valve at steam header. • Steam safety valve at steam header. • Blow down valve with limit switch. • Steam pressure gauge with siphon pipe and dampening cock at steam header. General Accessories : * Header mounted on top of boiler for steam inlet, outlet, by-pass, pressure gauge, safety valve and temperature indicator-cum-controller.* Audio alarm in case of safety lock-down.. Pre-wired Control Panel comprising.• Miniature circuit breaker-cum-isolator. • Rotary switch for feed water pump and burner. • Programmed sequence controller for auto operation of burner. • Contactors with thermal overloads for blower, fuel pump and feed water pump motors, relays for controls and safeties. • Pre-purging timer. • Bottle fuse for control circuit. • Channel mounted push-fit terminal blocks. • All cablings with cable markers from MCB onwards duly dressed and piped. Specification : Capacity : 400 Kg/hr. from feed water at 30 degree Celsius. Working Pressure, Kg/sq. cm.2 : 7 – 15 Thermal efficiency (NCV) % : 89 + 2 Electrical Load, Kw : 1.5 Main steam stop valve, mm : 40 Flue gas exhaust port, mm : 300

Boiler completion tools : i) a. Chimney – 6 meter. b. Fuel Tank – 150 liter. c. Water treatment plant for the boiler d. Soft Water day tank –1500 liter cap. e. Water pipe line from Soft water tank to boiler f. Blow Down Valve – One. g. Fuel pipe line from fuel tank to burner. ii) Steam Pipe Line- should be wrapped with LRB, chicken net tied, finally covered with aluminium sheet.