Bidhan Chandra Krishi Viswavidyalaya Tender

Chair Detail Specification : Supply of medium back revolving chair for visitor. Frame with 12 mm hot pressed ply covered with moulded PU foam in seat & back with leatherite upholstery in angular stitch design on both seat and back. The back of the chair is in arch shape extending below the seat. The arm rests of the Chair us in d-shape steel inserted PU arms including center tilt and height adjustment mechanism with gas lift and steel inserted nylon base with castors. Overall size of the chair shall be seat size 500mm x 500mm total height of the back rest shall be 960mm and the width of the back rest at the top position shall be 530 mm and bottom position shall Be 470mm and height of the back rest shall be 640 mm

Visitor chair Detail Specification : Medium back fixed chair. Seat & back made of high density foam with leatherite upholstery. Back of chair have horizontal stitching design and fixed in ergonomic shape for extra support on back. Base made of MS chromium plated in cantilever shape

Sofa Set ( 3+ 1+1) Detail Specification : Slim and sleek design sofa comprising of 2 pcs. 1 seater & 1 pc. of 3 seater. Structure of sofa is made of solid hard wood and the base of seat and backrest webbed with nylon belt and padded with 32 density hi resilient foam and upholstered in woven fabric or leatherite. Armrest is comfortable and finished with same material. Sofa is supported by strong chromium plated angular ms legs. The back rest of the sofa is ergonomically designed with 3 design pattern for the 2 seats and back and contoured armrests

Book Case Detail Specification : Unit with 2 glass doors & shelves. All panel made if 18 mm thick pre-laminared particle board (conforming is- 12823, density 700 kg/m³ is chemically treated for termite & borer resistant, tested resistant to abrasion, steam, crack ,stain & upto 15% moisture content )of approved colour laminate is processed & bonded by amino-formaldehyde based / urea melamine resins with increased melamine offering enhanced resistance. All exposed edges sealed with 2 mm PVC edge banding bonded by hot melt glue tape bonding processed by automated edge banding machine . Completed with necessary hardwires & fittings from approved brand .all accessories will be of approved quality Size : W-670 X D-400

Steel Rack Detail Specification : Made by iron slotted angle 35 mm x 35mm having four Compartments, five shelves including top & bottom. Shelf Made by 20 gauge C.R. sheet, nicely spray painted and all Complete Size : W-915 X D-300 X H-1980

Standard Table Detail Specification : Executive table's top made of 25mm thick & gable end & modesty panel made of 18 mm thick pre-laminated particle board (conforming is-12823, density 700 kg/m³ is chemically treated for termite & borer resistant, tested resistant to abrasion, steam, crack, stain & upto 15% moisture content) of approved colour laminate is processed & bonded by Amino-formaldehyde based / urea melamine resins with increased melamine offering enhanced resistance. All exposed edges sealed with 2 mm PVC edge banding bonded by hot melt glue tape bonding processed by automated edge banding machine . Completed with necessary hardwires & fittings from approved brand Size : W-1200 X D-600 X H-750

Chair Detail Specification : Supply of medium back revolving chair for visitor. Frame with 12 mm hot pressed ply covered with moulded PU foam in seat & back with leatherite upholstery in angular stitch design on both seat and back. The back of the chair is in arch shape extending below the seat. The arm rests of the chair us in d-shape steel inserted PU arms including center tilt and height adjustment mechanism with gas lift and steel inserted nylon base with castors. Overall size of the chair shall be seat size 500mm x 500mm total height of the back rest shall be 960mm and the width of the back rest at the top poistion shall be 530 mm and bottom position shall be 470mm and height of the back rest shall be 640 mm

Steel Almirah Detail Specification : Two door cabinet made of 18-20 gauge ms powder coated with glass swinging door structured by metal from all sides.4 shelves Making 5 compartments. Size : W-860 X D-480 X 1980MM

Conference Table Detail Specification : Top made of 25 mm thick & base made of 18 mm thick pre-laminated particle board (conforming is-12823, density 700 kg/m³ is chemically treated for termite & borer resistant, tested resistant to abrasion , steam, crack ,stain & upto 15% moisture content )of approved colour laminate is processed & bonded by amino-formaldehyde based / urea melamine resins with increased melamine offering Size : W-4200 X D-1800 X H-750

Chair Detail Specification : Fiesta - medium back mesh chair. 360º revolving type chair .seat & back framed with hard PVC then covered with nylon mesh & seat made of moulded polyurethane foam (foam density of 45 ± 2kg / m³) with mesh upholstery .the back of the chair designed in contoured lumber support. The arm rests of the chair is in d-shape made of poly propylene. Echanism - pneumatic height adjustment is 7.0 cm .upright position locking. 3 piece telescopic bellow assembled with an injection moulded black polypropylene .nylon base – MS chrome and fitted with injection moulded black polypropylene with 5 pcs. Of twin wheel castors which are injection moulded in black nylon

Laptop Table Detail Specification : Laptop table's top made of 25mm thick & gable end & modesty panel made of 18 mm thick pre-laminated particle board (conforming is-12823, density 700 kg/m³ is chemically treated for termite & borer resistant, tested resistant to abrasion, steam, crack, stain & upto 15% moisture content) of approved colour laminate is processed & bonded by Amino-formaldehyde based / urea melamine resins with increased melamine offering enhanced resistance. all exposed edges sealed with 2 mm PVC edge banding bonded by hot melt glue tape bonding processed by automated edge banding machine . Completed with necessary hardwires & fittings from approved brand Size : W-1050 X D-600 X H-750

DIAS Detail Specification : Made of 1" thick solid wood. Magazine table's top made of 25mm thick & gable end & modesty panel made of 18 mm thick pre-laminated particle board (conforming is-12823, density 700 kg/m³ is chemically treated for termite & borer resistant, tested resistant to abrasion , steam, crack ,stain & upto 15% moisture Size : W-3600 X D-2400 X H-750

Standard Table for Podium Detail Specification : Magazine table's top made of 25mm thick & gable end & modesty panel made of 18 mm thick pre-laminated particle board (conforming is-12823, density 700 kg/m³ is chemically treated for termite & borer resistant, tested resistant to abrasion, steam, crack, stain & upto 15% moisture content) of approved colour laminate is processed & bonded by amino-formaldehyde based / urea melamine resins with increased melamine offering enhanced resistance. All exposed edges sealed with 2 mm PVC edge banding bonded by hot melt glue tape bonding processed by automated edge banding machine . Completed with necessary hardwires & fittings from approved brand Size : W-1200 X D-600 X H-200

Student Chair Detail Specification : Frame - 1.2 mm wall thickness. Black Powder Coated Tube. Seat Polypropylene seatback Polypropylene back. Plastic Fittings made in house from Virgin PP plastic for Long Service Life. Colors with options Black, red, Blue. Folding Tablet

Laboratory Table Detail Specification : Laboratory table-top - providing & fixing 18mm polished granite top + 18 mm ply. Base - 18 mm ply. all made of B.W.R grade plywood- conforming is. 303 -1989 chemically treated for termite and bored resistant bonded with melamine fortified urea formaldehyde synthetic adhesive/ phenol formaldehyde synthetic resin of approved make and brand. Decorative lamination conforming to B.S. 476 & environment friendly. Thickness of the all outer laminates 1.00 mm & thickness of inner laminates - 0.80mm. All ply boards panels will be pre-pressed in the factory on both side by laminates of thickness 1.00mm on the exterior face & 0.80 mm on the interior surface. it is glued by spray & pre -pressed in hot press. No manual process of glueing is involved. All the ply wood surfaces, whether internal or external should be covered with laminate. This gives a clean finish, no bubble and no undulation on the surface. One pencil drawer & one file cabinet provided. Upper table top apparatus rack with two shelves provided. Side panel of upper rack will be decorated by fabric fixed (with storage capacity at base) Studs. Electrical facility also provided from floor on the table Top. All accessories will be of approved quality Size : W-2400 X D-1200 X H-750

Tools Detail Specification : Seat and back made of high density foam with fabric upholstery. Round base made of ms chromium plated with foot rest. Class III hydraulic mechanism for height adjustment