Bharat Sanchar Nigam Limited Tender

Supply, installation, testing and commissioning of 500 KVA DG Set , SITC of factory assembled, factory tested diesel engine alternator set with an acoustic enclosure, conforming to the Environment (Protection) Act, 1986 and Environment (Protection) Rules, 1986, latest as amended upto date for noise and emission norms and the latest CPCB Norms as and when amended by Ministry of Environment and Forest, Capable of delivering not less than 500KVA/400KW at typical site conditions including all accessories like common base frame, AVMs, Starting Batteries of low maintenance type suitable for cranking duty and capacity not less than 180AH for 12V/24V DC system (or manufacturer recommended AH in case the battery is same make as that of Engine and supplied by the Engine manufacturer only) with leads and terminals, including battery charging dynamo, residential type silencer and suitable Exhaust piping up to silencer with supports, 850 litres fuel tank, with braided flexible fuel piping and MS piping (B-class) wherever required of suitable size etc with valves and other fittings for supply and return lines, hand fuel transfer pump with suitable hose pipes and clips, with suitable manual control panel and comprising the following as per the detailed specifications, General Technical requirement (GTR)/Commissioning, Installation details and warranty details as attached complete as required. The agency/seller has to carry out associated work as per General Technical Requirement attached as part of their scope of work without any extra cost for these works etc as required. (Please refer schedule of items given in ATC documnet for more details).

Supply and laying of 3 and half core, 240 Sq mm Aluminium armoured Cable in Open duct , Supply and Laying in existing open duct of 1 No. cable of ISI marked heavy duty PVC insulated, armoured cable, with PVC outer Sheath of Type ST-2 (FR Grade, Category C1), with aluminum conductor having insulation of PVC compound type -C, suitable for rated voltage up to and including 1100 volts and conforming to IS- 1554 (Part-1) latest. For 3-Phase Power Generators, 3.5 core x 240 sqmm size complete as required. (Note-This shall be extra legth of LT Cable required for connecting DG Set supply to existing MV Panel ,over and above the Length of LT Cable to be supplied by Seller as per GTR/ATC details given)

Supply and laying of 3 and half core, 240 Sq mm Aluminium armoured Cable in Existing Pipe , Supply and Laying in existing RCC/Hume/Metal pipe of 1 No. cable of ISI marked heavy duty PVC insulated, armoured cable, with PVC outer Sheath of Type ST-2 (FR Grade, Category C1), with aluminum conductor having insulation of PVC compound type -C, suitable for rated voltage up to and including 1100 volts and conforming to IS- 1554 (Part-1) latest. For 3-Phase Power Generators, 3.5 core x 240 sqmm size complete as required. (Note-This shall be extra legth of LT Cable required for connecting DG Set supply to existing MV Panel ,over and above the Length of LT Cable to be supplied by Seller as per GTR/ATC details given)