Asansol Durgapur Development Authority Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Asansol Durgapur Development Authority - ADDA Tender
Civil And Construction
Building Construction
Eprocure
Opening Date10 Sep 2022
Closing Date24 Sep 2022
Tender Amount₹ 31,31,251
Costs
EMD
₹ 62,625Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_ADDA_404361_3Bid Award Id
ViewTender No
ADDA/ASN/ED/N-33(2022-2023)Tender Authority
Asansol Durgapur Development Authority ViewPurchaser Address
-Website
http://https://addaonline.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Earth work in filling in foundation trenches or plinth with goode earth , in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer, complete.
-
-
-
... More
With earth obtained from excavation of foundation.
223.4
-
77.54
... More
Flling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating same by through saturation with water and ramming complete including cost of sand.
-
-
-
... More
By Fine sand .
90.1
-
640.86
... More
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand .
184
-
324
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant IS codes. [ Pakur variety]
37.25
-
4598.09
... More
Brick work with 1st class bricks in cement mortar (1:6)
-
-
-
... More
In foundation and plinth
14.2
-
4812
... More
In superstructure
-
-
-
... More
Ground floor
36.5
-
5035
... More
first floor
6.8
-
5146
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor with HB netting
-
-
-
... More
Ground floor
95.8
-
705
... More
25 mm thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and painting the top surface with a coat of bitumen (VG- 40) using1.7 Kg/ sqm including heating the bitumen and cost & carriage of all materials complete. [ bitumen to be supplied by the agency]
14.9
-
261
... More
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture]
-
-
-
... More
In Ground Floor & foundation with Concrete mixture [ M20 Grade]
93.9
-
5243.19
... More
Above Ground Floor Roof with Concrete mixture [ M20 Grade]
2.4
-
5338.19
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with rewuired bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting , fixing and stricking out after completion of works.
-
-
-
... More
25 mm to 30 mm wooden shuttering
-
-
-
... More
Upto Ground floor roof level
339.3
-
328
... More
Above Ground Floor Roof
23.3
-
346
... More
25 mm to 30 mm shuttering without staging in foundation etc.
128.3
-
205
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, strips binders etc. including supplying of roads, initial straightening and removal of loose rust (if necessary) cutting to requisite length hooking and bending etc. complete as per drawing and direction.[SAIL/TATA/RINL.]
-
-
-
... More
For M.S. / Tor steel.
-
-
-
... More
Upto Ground floor roof level
12.9
-
54942.93
... More
Above Ground Floor Roof
0.5
-
55372.93
... More
Supplying, fitting and fixing fan hook for ceiling with 1.0 m long ,16 mm dia. Rod complete including mending damages.
10
-
100
... More
Plaster (to wall, floor, etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints roughening of concrete surface including chipping and application of cement slurry where necessary etc. complete.
-
-
-
... More
With 6:1 cement mortar.
-
-
-
... More
20 mm thick plaster (Out side)
-
-
-
... More
In Ground floor.
470.1
-
155
... More
In First floor.
43.4
-
159
... More
With 6:1 cement mortar.
-
-
-
... More
15 mm thick plaster (In side)
-
-
-
... More
In ground floor.
267.9
-
181
... More
10 mm thick plaster in (1:4)(Celing)
-
-
-
... More
In ground floor.
126
-
123
... More
Neat cement punning about 1.5 mm thick in wall , dado, window sills, floor, drain etc.
20.8
-
79
... More
Neat cement punning about 1.5 mm thick in wall , dado, window sills, floor, drain etc.
181.4
-
34
... More
Artificial stone in floor , dado, staircase etc.with cement concrete (4:2:1) laid in panels as directed, with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners including application of cement sullry before flooring works, using cement @ 1.75 kg/sqm all complete including all materials and labour.(In G Floor/ With graded stone chips :3 mm thick topping (High polishing grinding on this item is not permitted) with ordinary cement.
-
-
-
... More
35 mm thick artificial stone.
-
-
-
... More
In ground floor.[roof]
186
-
323
... More
M.S inegrated griil as per approved design integrated with steel window or ventilator, joints continuosly welded with M.S. flats and bars.
192
-
94
... More
Supplying best Indian sheet glass pans set in putty and fitted and fixed with nails and putty complete in all floors.
-
-
-
... More
4.0 mm thick.
10.2
-
536
... More
M.S. Gate of jail type as per approved design made of strong M.S. framework and intermidiate sitiffiners/ round / squire bars or angles and with lining of 14 gauge thick M.S. sheets including necessary locking & hanging arrangement fitted and fixed complete with door frame made of ISA 65 x 65 x 8 mm section
1.1
-
10090
... More
Supplying fitting and fixing door frame with M.S. angle as per drawing and direction of required section. The holes for counter sunk machine screw and nut will be such as to fit 8 to 10 mm iron screw. The counter sunk nut to be welded . The nuts are to be welded after carefull checking with screw. All welding spot should be properly filled or rounded smoot including cost of welding hinges for hinge cleates , lugs for hasp bolt , socket bolt etc. and necessary M.S. clampof 25 mm x 6 mm flat 225 mm long as per direction welded to the frame fitted and fixed in position excluding cost of concrete.
-
-
-
... More
M .S. angle frame: 65 x 65 x 6 mm @ 5.8 Kg / m
86.6
-
79
... More
M.S. or W.I. ornamental grill of approved design joints continously welded with M.S. / W.I. flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs above 16 Kg / sqm
0.67
-
9696
... More
Priming one coat on steel or other metal surface with synthetic enamel/ oil bound primer of approved quality including smoothening surfaces by sand papering etc
-
-
-
... More
On steel surface
56
-
29
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary
-
-
-
... More
On Steel surface / hi- gloss
-
-
-
... More
Two coats (with any shade except white).
56
-
79
... More
French Polishing to wood wook including preparing surface (ordinary gloss)
-
-
-
... More
On new wood work
10.9
-
467
... More
Supplying fitting and fixing UPVC pipes A type and fitting conforming to Is: 13592-1992 with all necessary clamps nails, including making holes in walls, floors etc. cutting trenches in any soil thorugh masonry concrete structure etc. .f necessary and mending good damages including jointing with jointing materials(Spun yarn,valamoid / bitumen / M.seal etc.) complete.
-
-
-
... More
110 mm diameter.
30.6
-
251
... More
Supplying ,fitting and fixing UPVC fittings conforming to IS 13592-1992.
-
-
-
... More
Plain tee110 mm
6
-
172
... More
Shoe 110 mm dia
6
-
111
... More
Acrylic distemper to interior wall , celling with a coat of solvent based interior grade acrylic primer as per manufactures specification including cleaning and smoothing of surface.
-
-
-
... More
Two coats
393.9
-
70
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC.
-
-
-
... More
One Coat
-
-
-
... More
Ground floor
470.1
-
31.4
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer
-
-
-
... More
Two Coat
-
-
-
... More
Normal Acrylic Emulsion
470.1
-
67
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors and 4 nos. key stone (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.
-
-
-
... More
Wall - with sand cement mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @2.91 kg/sq.m. and joint filling using white cement slurry @ 0.2 kg/Sq.m.
-
-
-
... More
Area of each tile upto 0.09 Sq.m.
-
-
-
... More
Other than Coloured Decorative./ White
77
-
698
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, iron butt hinges and M.S. Clamps.
-
-
-
... More
Malayasian Sal
0.08
-
75572
... More
Supplying Solid flush type door of Deluxe Decorative (both side ) quality,conforming to IS 2202 the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings.
-
-
-
... More
35 mm thick Leaf Shutter (Single Door)
4.2
-
3955
... More
M.S. Clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete (1:2:4) including cutting of brick work/concrete work as per direction.40 x 6 x 200 mm
6
-
25
... More
Iron Butt Hinges of approved quality, fitted and fixed with steel screw with ISI mark, size 100mm x 58mm x 1.90 mm.
6
-
47
... More
Supply "Godrej" mortice lock chromium plated with latch and key 4 levers including fitting and fixing complete.
3
-
1081
... More
Anodised aluminium barrel /tower/ socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
-
-
-
... More
150 mm long x 10mm dia. bolt.
4
-
63
... More
Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.
-
-
-
... More
250 mm x 16 mm dia. bolt.
2
-
233
... More
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
-
-
-
... More
125 mm grip x 10 mm dia rod.
2
-
95
... More
Supplying and laying Polythene sheet (150 gm / sqm ) over damp proof course or below flooring or in foundation trenches .
198
-
24
... More
Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge.
In ground floor.
2.9
-
1943
... More
Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter
cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm long M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge.
9.9
-
305
... More
Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm verticle channels 100mm apart in fully stretched position 20mm x 5mm M.S. flat as collapsible bracing properly rivetted and washered including 38mm steel roller including locking arrangement, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in wall, floors etc. and making good damages complete
5.72
-
4330
... More
Supplying, fitting & fixing Industrial Troughed Aluminium sheet (excluding the supporting frame work) of approved make & brand in alloy 3105 conforming to IS: 1254-1991 fitted and fixed with 75 mm & 25 mm Self tapping screw , EPDM Washer 16 mm dia & 3 mm th washer etc complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (Aluminium sheet to be supplied by contractor).
-
-
-
... More
0.65 mm thick
17.32
-
766
... More
Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made separately)
-
-
-
... More
15 mm. dia Medium Quality
27
-
192
... More
25 mm. dia Medium Quality
30
-
305
... More
Supplying, fitting and fixing Shallow water closet Indian pattern (IPWC) of approved make in white vitreous china ware in position.
-
-
-
... More
510 mm long
1
-
900
... More
Supplying fitting and fixing 10 litre PVC low down cistern of approved make with either side or bottom inlet, side over flow, brackets complete with all internal fittings
-
-
-
... More
Best Quality
2
-
1015
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. Brackets on 75 mm. x 75 mm wood blocks,C.P. waste fittings of 32 mm dia, one approved quality brass C.P. pillar cock of 15 mm dia, C.P. chain with rubber plug of 30 mm dia, approved quality P.V.C. waste pipe with C.P. nut 32 mm dia, 900 mm long approved quality P.V.C. connecton pipe with heavy brass C.P nut including mending good all damages and painting the brackets with two coats of approved paint.
-
-
-
... More
450 mm. x 300 mm. size
2
-
1979
... More
Supplying fitting and fixing towel rail with two brackets
-
-
-
... More
C.P. over brass
-
-
-
... More
25 mm dia. and 600 mm long
2
-
430
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
-
-
-
... More
635 mm x 395 mm x 420 mm
2
-
2869
... More
Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).
-
-
-
... More
450 mm X 350 mm
2
-
881
... More
Supplying, fitting and fixing Aluminium domical grating
-
-
-
... More
125 mm
2
-
56
... More
Supplying, fitting and fixing Bib Cock CP bib cock short body (Equivalent to code no 512 & Model - Tropical of ESSCO or similar branch) 15 mm
6
-
659
... More
Supplying, fitting and fixing CP Stop Cock (Equivalent to code no 514 (A) & Model - Tropical of ESSCO or similar branch) 15 mm
10
-
674
... More
Supply of UPVC fittings conforming to IS-13592-1992
-
-
-
... More
Door Tee
-
-
-
... More
110 mm diameter.
3
-
195
... More
Door Bend (T.S.)
-
-
-
... More
110 mm diameter.
6
-
147
... More
Vent Cowl
-
-
-
... More
110 mm diameter.
3
-
33
... More
Pipe Clip
-
-
-
... More
110 mm diameter.
30
-
21
... More
Supply, fitting and fixding EWC in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (P-trap)
2
-
1421
... More
Supplying, fitting and fixing Cromium Plated round shower with revolving joint (equivalent to code No 542 [N] and Model no Tropical / Similar ESSCO etc or approved brand ) approved by EIC
2
-
452
... More
Supplying, fitting and fixing glass shelf with aluminium guard rails.
-
-
-
... More
Ordinary type with 5.5 mm sheet glass
-
-
-
... More
600 mm X 125 mm
2
-
480
... More
Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only)
-
-
-
... More
25 mm.
2
-
778
... More
Supplying fitting and fixing best quality bavelled edge mirror 5.5 mm thick silverred as per I.S. 3438 / 1965 together with brass C.P. hinges
-
-
-
... More
450 x 300 mm
2
-
367
... More
Supplying PVC water storage tank of approved quality with closed top with lid (black-multi layer) 1000 lt. capacity.
1
-
5128
... More
Labour for hoisting P.V.C water storage tank from G.L. to the roof 2500 lt. capacity.
-
-
-
... More
Upto 1st storey from G.L.
1
-
96
... More
Extra for each additional story.
1
-
43
... More
Labour for punching hole upto 50mm dia.
3
-
19
... More
Supplying, fitting and fixing approved brand P.V.C. Connector white flexible with both end coupling with heavy brass over C.P. nut 15 mm. dia.
-
-
-
... More
750 mm. long
4
-
117
... More
Constructing Inspection pit of inside measurement 600mm x 600mm x upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L and 20 mm. thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surface of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
-
-
-
... More
With pakur variety
1
-
6855
... More
Supplying, fitting and fixing approved brand 32mm P.V.C. waste pipe with coupling at one end fitted with neessory clamps.
-
-
-
... More
750 mm. long
3
-
59
... More
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.
-
-
-
... More
Polythene Flush Pipe
2
-
155
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors and 4 nos. key stone (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.
-
-
-
... More
Floor - with sand cement mortar (1:4) 20mm thick & 2 mm thick cement slurry at back side of tiles using cement @2.91 kg/sq.m. and joint filling using white cement slurry @ 0.2 kg/Sq.m.
-
-
-
... More
Area of each tile upto 0.09 Sq.m.
-
-
-
... More
Other than Coloured Decorative./ White
13
-
692
... More
Supplying of UPVC Pipe (B type) and fittings conforming to IS 13592 -1992 .
-
-
-
... More
Single socketed 3.0 m length
-
-
-
... More
110 mm
6
-
292
... More
160 mm
6
-
546
... More
Fittings :
-
-
-
... More
Door Tee110 mm
4
-
195
... More
Door Bend 110 mm
4
-
147
... More
Door Bend 160 mm
2
-
369
... More
Plain tee Tee160 mm
2
-
262
... More
87.5 Bend 110 mm dia
4
-
120
... More
87.5 Bend 160 mm dia
2
-
338
... More
Vent cowl 110 mm dia
1
-
33
... More
Pipe Clip
15
-
21
... More
Rubber Ring
15
-
17
... More
Nahani trap 90 mm
2
-
105
... More
Rubber Lubricant 500 ml
1
-
187
... More
Solvent Cement 250 ml
2
-
103
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).
-
-
-
... More
(A) In 10-12 Micron thickness Annodizing film
-
-
-
... More
II) Coloured
-
-
-
... More
a) 2- track sliding window
-
-
-
... More
i) Bottom frame
12
-
244
... More
ii) Top and side frame.
36
-
218
... More
d) Shutter for all track sliding window.
-
-
-
... More
i) Bottom & Top member.
24
-
131
... More
ii) Style side member
24
-
128
... More
iii) Interlock member.
24
-
161
... More
e) Casement window ( 40 mm Depth series
-
-
-
... More
ii) Mullion.
24
-
237
... More
iv) Glazing clip.
64
-
48
... More
v) Cleat angle. (Non-annodized)
64
-
263
... More
h) Louvered window.
-
-
-
... More
i) Top, bottom and side member
24
-
193
... More
ii) Louvered Section.
3.6
-
692
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-
-
-
-
... More
(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.
-
-
-
... More
i ) 2 track sliding window.
14.4
-
696
... More
v ) Louvered window.
0.72
-
730
... More
iv ) Fixed glazing
9
-
768
... More
Fixed partitions.
(Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 Sq.m)
-
-
-
... More
Top , bottom & side member.
5
-
334
... More
Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.
-
-
-
... More
i) For sliding windows
-
-
-
... More
a) ' T' shaped EPDM gasket for frames
560
-
13
... More
b) 'U' shaped EPDM gasket for frames
140
-
15
... More
Supplying PVC rollers for sliding windows as per direction of Engineer in charge.
40
-
14
... More
Supplying maruti lock (100mm)
20
-
14
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.
-
-
-
... More
ii) 4mm thick coloured / tinted / smoke glass
14.4
-
468
... More
Supplying, fitting and fixing porcelain toilet paper holder of approved make with wooden spindle as necessary.
-
-
-
... More
(ii) Box type size 175 mm X 150 mm
2
-
338
... More
Supplying fitting and fixing plaque made of Granite slabs ( single piece) of 15 mm to 18 mm thick with uniform texture and without decorative veins in facia etc fixing with using Cement slurry at back side of granite @4.4 kg/sq.m and white cement slurry for joint filling @1.8 kg/sq.m.including making lettering , sign marks etc as per direction in the granite slabs with fixed at brick wall (in 1:6) as directed including earth cutting , 75 mm thick sand filling , 75 mm thick Cement concrete (1:2:4) and plastering with 20 mm thick sand cement mortar (6:1) as specifed by the Department including wall putty , Acrylic primer & Super Protective 100% Acrylic Emulsion two coats including all incedential charges for labours , materials , machinaries & transportig charges complete in all respect as per direction of EIC.
1
-
10417.79
... More
Sub-Total
1
-
2768078.84
... More
ADD GST-12 % (CGST-6 % & SGST-6 %) ON SUB-TOTAL
1
-
332169.46
... More
ADD WEST BENGAL LABOUR WELLFARE CESS 1 % ON SUM OF SUB-TOTAL & GST.
1
-
31002.48
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements