Archaeological Survey Of India Tender

2. Supply, installation, testing and commissioning of Wall/ ceiling Mounted type Indoor Unit with compact cooling coil, electronic expansion valve, multi speed fan motors, dynamically balanced blowers, built in drain pump, including insulation, complete with all standard accessories and suitable for remote control operation etc as reqd.

2. c) 2.0TR Capacity- Hi-Wall type.

3. Supply, installation, testing and commissioning of Variable refrigerant flow distribution copper distribution joint of individual different sizes for refrigerant piping (Y - Branches) complete as required.

4. Supply, installation, testing and commissioning of hard/soft drawn Copper refrigerant pipes for inter-connecting the indoor and outdoor units, duly insulated with 19mm/13mm close cell elastometric nitrite rubber insulation (class O) for suction and discharge i/c pressure testing complete as required.

4. a) 41.3 mm outer dia with 19 mm thick insulation.

4. b) 28.6 mm outer dia with 19 mm thick insulation.

4. c) 22.1 mm outer dia with 13 mm thick insulation

4. d) 19.1 mm outer dia with 13 mm thick insulation.

4. e) 15.9 mm outer dia with 13 mm thick insulation

4. f) 12.7 mm outer dia with 13 mm thick insulation

4. g) 9.5 mm outer dia with 13 mm thick insulation.

4. h) 6.4 mm outer dia with 13 mm thick insulation.

5. Supply, installation, testing and commissioning of PVC pipe medium class (For drainage of water from IDU) with 6 mm thick Nitrile Rubber insulation.

5. a) 32 mm NB

5. b) 25 mm NB

6. Supply and fixing of following size PVC insulated PVC sheathed copper communication cable in PVC Pipe on surface along with the refrigerant pipe line between ODU and IDU or as per OEM specification.

6. a) 2 core x 1.5 Sqmm

7. Supply, installation, testing and commissioning of Cordless remote controller and system controller for units mentioned in item no 2 as required.

8. Supplying and laying of 3.5 core 50 sqmm Aluminium armoured cable on surface for the connection of VTPNDB for the Supply of VRF Outdoor & Indoor Units with connection testing commissioning etc as reqd.

9. Supplying and laying of 4 core 16 sqmm Copper armoured cable on surface for the connection of VRF Outdoor with connection testing commissioning etc as reqd.

10. Supplying and laying of 3 core 2.5 sqmm copper unarmoured cable on surface/in the UPVC Trunking/PVC Pipe for the connection of Various Indoor Units of VRF System with connection testing commissioning etc as reqd.

11. Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (Make:LT/ABB/Hager)

11. a) 6 way (4 + 18), Double door

12. Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Make:LT/ABB/Hager)

12. a) 12 way, Double door

13. Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make:LT/ABB/Hager)

13. a) Single pole

13. b) Double pole

13. c) Tripple pole

14. Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Make:LT/ABB/Hager)

14. a) 160 Amp, 16 KA, TPMCCB

15. Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

15. a) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

16. Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/ cable as required.

17. Supplying & fixing TPN sheet steel encloser on surface/recess along with 63 amp 415 volt 4P Isolator complete with connections, testing and commissioning etc. as required.

18. Supplying and fixing of following sizes of UPVC TRUNKING along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed as required. 100 X 50 MM(NCT1050D1WHI -MK)

19. Supplying and fixing 8 Way surface/ recess mounting, vertical type, 415 volts, TPN MCCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 250 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting following MCCB's, inter-connection between incomer MCCB and bus bars with cable allay on both side, metering panel including following rating MCCBs, testing, commissioning, complete etc as reqd. (make:-HPL/Havells, Standard) [a) 250 A 3 pole MCCB- 1 no, b) 100 A 3 pole MCCB- 5 nos, c) 32 A SP MCCB- 3 nos]

20. "Providing & fixing aluminium composite panel interior grade (upto 18 micron PVDF coated Aluminium skin on top & 5 micron at bottom plus 2mm thick polyethylene core) on column/wall on Aluminium sections structure of 'U' Channel in required colour/pattern & panel size as per site fixed on aluminium extruded standard 'U' Channel sections of size 100X20X1.6mm (+/- 5%) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, C.P. brass/stainless steel screws. The rate shall include cost of ACP panel, subframe of aluminium section for fixing of ACP Scaffloding/ Aluminium cleats with screws complete including making openings as required at site like electrical fittings, recess for pipe etc., all necessary, tools and plants, scaffolding and as per manufactures complete and as per the direction of the Engineer in Charge. (Surface area of aluminium composite panel shall be measured for payment). Make:- AL. Composite Panel PVDF coated: AluDecor " 500 Sqft943.00Per Sqft4,71,500.00Do

21. Supplying & charging of R410 gas in the existing VRF System complete etc as reqd.

22. Making hole on wall almost 10 Nos. (Depth of wall 100 cm) of 300 mm in length & 150 mm in width along with necessary repairing & covering of exhibition materials to prevent from dust, complete etc. as required.