Animal Resources Development Department Tender

BAFFLE CEILING Providing and fixing of 50x50x50mm U shape Baffle of 0.7mm thikness aluminum,the baffle shell be place in a gap of 50mm that is baffle to baffle gap 50mm. Finish shell be wooden finish. Coated wooden finish of any shade that is disairable. The buffle will be fix to the socket helf of her sliding sofit carriar and GI wire / GI rod, two baffle linear wire should be joint through a baffle slice and all baffle should be coverd by end cap.

OVERHEAD Cabinet for Cafeteria Providing & fixing of overhead storage made of 19 mm BWR ply with 12mm ply back, 19mm B/B shutter and finished with 1mm laminate on outside and inside finished with balancing laminate with inside shelves as per design.

RECEPTION TABLE Fabrication and fixing of Reception Table. Structure is formed of 18mm thick BWP Ply / flexi ply with all curves and moulds. Table to have provision for one person sitting capacity with a side storage unit of 100mmx400mm with lockable drawers on soft close best quality telescopic drawer channel and shutters on single locking facility. The tabletop to be finished with 1mm thick approved laminate fixed over the ply structure, edges to be finished with 2 mm thick matching pvc edge banding Transaction counter ( 100mm wide ) to be made of 18mm thick BWP ply and facia to be finished with approved 1mm thk laminate. All internal drawers and cabinets' internal surfaces must be finished with matching balancing laminate. Cost to include Borer / Antitermite treatment for wood/plywood. Rate to include wire manager to bring in the power cable to the work top.

CABINET WITH WATER DISPENSOR Providing & fixing of overhead storage made of 19 mm BWR ply with 12mm ply back, 19mm B/B shutter and finished with 1mm laminate on outside and inside finished with balancing laminate with inside shelves as per design.

SECURITY DESK Fabrication and fixing of Security Table. Structure is formed of 18mm thick BWP Ply / flexi ply with all curves and moulds. Table to have provision for one person sitting capacity with a side storage unit of 100mmx400mm with lockable drawers on soft close best quality telescopic drawer channel and shutters on single locking facility. The tabletop to be finished with 1mm thick approved laminate fixed over the ply structure, edges to be finished with 2 mm thick matching pvc edge banding Transaction counter ( 100mm wide ) to be made of 18mm thick BWP ply and facia to be finished with approved 1mm thk laminate. All internal drawers and cabinets' internal surfaces must be finished with matching balancing laminate. Cost to include Borer / Antitermite treatment for wood/plywood. Rate to include wire manager to bring in the power cable to the work top.

LOUVER'S FOR PANELING Providing & fixing LOUVER'S is made by combining fibre chips, forest wood waste through a homogeneous construction process. These fibre chips are pressed together to form a single layer, removing small wood content to form a robust higher density board.Special Glue being used to make it.Termite, Borer, Fungus, Water Resistant, Environmental Friendly.

ATRIFICIAL PLANT Providing & fixing Artificial plants and trees with natural tropical trunks and washable leaves -geometric topiary (spheres, cones, hedges, walls, portals, chairs etc.) artificial lawn, grass and hedges - furniture -modern - pots and planters - Christmas Trees and Christmas Items - palms - succulent plants- shrubs - foliages - natural trunks etc. For an elegant Wall Upholstery. For vertical indoor and outdoor Gardens. For refined and glamorous Pictures made up of our Greenery. Unique Creations. Meant for that Space, for that special Occasion.

Door Mat (Dust Arrestor) Providing & fixing Doormat suited to indoor and covered entrances. High cleaning power. Holds the dirt and easy to clean. This standard prescribes the constructional particulars and performance requirements of tufted mats made from coir and PVC/latex backing.

Vertical Blinds Providing & fixing of Vertical blinds with shade/screening and material complete with all accessories in all respect as per approved fabric/color and texture.(Make-Nova)

Wallpaper Providing and fixing Wallpaper over primer finish wall, wooden partition & Paneling surface in approved design. Wall paper to have PVC coated paper backing. Minimum width of 70cm per roll. Total weight 400g/sqm.

Slotted angle rack  4 shelf 5 compartment. 3 side bracing , 14 swg angle. Size : 78” (H)x 36”(W) x 14”(D). Shelf made of 20 swg.

KOTA STONE POLISH (IN STAIR AREA) Polishing work on existing staircase area, kota stone Machin polish with Axeluary Acid & Muric Acid. 7 to 2 pad using to polish.

PANELING IN GROUND FLOOR Providing and fixing ply panelling on wall & coloumn as per approved design, all complete and finished with Decorative laminate complete as direction of engineer in charge.

OUTDOOR AC UNIT COVERED BY IRON BAR 30mmx30mm Square Bar virticaly grouted on floor,10mm square bar horigentaly weldet on 30mm square bar.

NAME PLATE Providing and fixing stainless steel Name Plate 304 grade size of 12"X3".

NAME PLATE "PUSH"/"PULL" Providing and fixing stainless steel Name Plate 304 grade size of 6"X2.5".

Drawer channel 18'' (make: Godrej/haffle/hettich), good quality.

Supplying , fabrication fitting & fixing m.s 25mm sq pipe framing mounting 3 mm out door ACP Sheet router cutting front side 3D acrylic sheet letter cumputerized laser cutting individual 2 inch rasing coupal letter inside led/ diver etc fitting inculding modul Led,SMPS, wire.letter fitting m.s angle / pipe / welding etc, as per requirement. Size: 3500x1000 ( approx 12 ftx4 ft = 48 sqft. )

Supplying , fabrication fitting & fixing m.s 25mm sq pipe framing mounting 3 mm out door ACP Sheet router cutting front side flat type acrylic sheet letter cumputerized laser cutting individual letter inside led/ diver & other led light halo effect etc fitting inculding modul Led, SMPS, wire.letter fitting m.s angle / pipe / welding etc, as per requirement . Size : ( PBGSBS) 3080 MM ( APPROX 10 FT X4 FT )

Supply fitting P2 indoor led video wall display 4 inch board thickness connectivity USB Mild steel material Size : ( 1200mm approx 4 ft x3 ft )

Taxes & Duties

Add: G.S.T. @ 18% of Rs. 24,98,971=68 i.e. Rs. 7,32,983=88

Add: Labour Cess @ 1% of Rs. 29,48,786=58 i.e. Rs. 29,487=87