Vehicle Tenders

Description: CATEGORY: Bus Hiring Service - Short Term - Local; BUS 17 SEATER DELUXE BUS FROM GUWAHATI TO ANYWHERE 08 HRS OR 80 KMS; Deluxe (DLX); GUWAHATI TO ANYWHERE 08 HRS OR 80 KMS , Bus Hiring Service - Short Term - Outstation; BUS 17 SEATER DELUXE BUS FROM GUWAHATI TO ANYWHERE 24 HRS OR 240 KMS; Deluxe (DLX); GUWAHATI TO ANYWHERE 24 HRS OR 240 KMS , Bus Hiring Service - Short Term - Outstation; BUS 40 SEATER NON DELUXE BUS FROM GUWAHATI TO ANYWHERE 12 HRS OR 120 KMS; Non Deluxe (NDX); GUWAHATI TO ANYWHERE 12 HRS OR 120 KMS , Bus Hiring Service - Short Term - Outstation; BUS 40 SEATER NON DELUXE BUS FROM GUWAHATI TO ANYWHERE 12 HRS OR 200 KMS; Non Deluxe (NDX); GUWAHATI TO ANYWHERE 12 HRS OR 200 KMS , Bus Hiring Service - Short Term - Outstation; BUS 26 SEATER NON DELUXE BUS FROM GUWAHATI OBLIQUE NARANGI TO ANYWHERE 14 HRS OR 400 KMS; Non Deluxe (NDX); GUWAHATI OBLIQUE NARANGI TO ANYWHERE 14 HRS OR 400 KMS , Bus Hiring Service - Short Term - Outstation; BUS 26 SEATER NON DELUXE BUS FROM GUWAHATI OBLIQUE NARANGI TO ANYWHER 20 HRS OR 550 KMS; Non Deluxe (NDX); GUWAHATI OBLIQUE NARANGI TO ANYWHER 20 HRS OR 550 KMS , Bus Hiring Service - Short Term - Outstation; BUS 32 SEATER DELUXE BUS FROM GUWAHATI AIR PORT TO UMROI POINT TO POINT APPROX 120 KMS; Deluxe (DLX); GUWAHATI AIR PORT TO UMROI POINT TO POINT APPROX 120 KMS , Bus Hiring Service - Short Term - Outstation; BUS 32 SEATER NON DELUXE BUS FROM GUWAHATI OBLIQUE NARANGI TO KOKRAJHAR POINT TO POINT APPROX 215 KMS; Non Deluxe (NDX); GUWAHATI OBLIQUE NARANGI TO KOKRAJHAR POINT TO POINT APPROX 215 KMS , Bus Hiring Service - Short Term - Outstation; BUS 32 SEATER NON DELUXE BUS FROM GUWAHATI TO UMROI POINT TO POINT APPROX 100 KMS; Non Deluxe (NDX); GUWAHATI TO UMROI POINT TO POINT APPROX 100 KMS , Bus Hiring Service - Short Term - Outstation; BUS 32 SEATER NON DELUXE BUS FROM CHAPRAKATA TO SAI STADIUM KOKRAJHAR AND BACK POINT TO POINT APPROX 100 KMS; Non Deluxe (NDX); CHAPRAKATA TO SAI STADIUM KOKRAJHAR AND BACK POINT TO POINT APPROX 100 KMS , Bus Hiring Service - Short Term - Outstation; BUS 17 SEATER NON DELUXE FORCE OBLIQUE TRAVELLER TYPE CATEGORY WITH CARRIER FROM GUWAHATI TO SENGE VIA OKSRT OBLIQUE BCT POINT TO POINT APPROX 370 KMS; Non Deluxe (NDX); GUWAHATI TO SENGE VIA OKSRT OBLIQU.. , Bus Hiring Service - Short Term - Outstation; BUS 17 SEATER NON DELUXE FORCE OBLIQUE TRAVELLER TYPE CATEGORY WITH CARRIER FROM GUWAHATI TO MISSAMARI POINT TO POINT APPROX 180 KMS; Non Deluxe (NDX); GUWAHATI TO MISSAMARI POINT TO POINT APPROX 180 KM.. , Bus Hiring Service - Short Term - Outstation; BUS 17 SEATER NON DELUXE FORCE OBLIQUE TRAVELLER TYPE CATEGORY OR ANY VEHICLE IN THE SAME SEGMENT FROM GUWAHATI OBLIQUE NARANGI TO TENGA VIA OKSRT OBLIQUE BCT POINT TO POINT 330 KMS; Non Deluxe (NDX); GU..

Description: Wheel Sharf - 25.000 Mt-delivery On Actual Weighment Basis. Lot No. 5312 25 01 01 Gtl Gy Ws Ap. Available With Sse C W Gy. Scrap, Condemned, Released, Unserviceable Wheel Swarf. Total Qty 25.000 Mt (approx) (delivery On Actual Weighment Basis). Available At Opposite To Atc In Bin No. 02 And 03 At Box N Depot Gooty. Ds-8 No. 531200054, Dated 20.12.24. Hsn Code: 720429 - Gst 18%. Note : For Taking Delivery Of Boring, Purchaser Should Ensure Coverage Of Body And Top Portion Of Truck To Arrest Leakage Of Boring In Enroute To Avoid Damages To The Vehicles Of Road User). Special Note : After Loading The Material Spilled Over Boring Chips Have To Be Cleaned By The Purchaser (i.e Loading Area) Note To The Bidders 1) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction.2)post Auction No Representation Shall Be Entertained.3) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. 4) Gas/chisel Cutting Is Permitted, If Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description 5) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 6) It Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. 7) Clubbing Of The Lots, What So Ever, Is Not Permitted For Loading 8) Request For Fixation Of Delivery Point Should Be Invariably Raised In Ireps Online Only. Purchasers Are Requested To Make Use Of This Facility. No Representative Should Be Sent To The Office Of Sr.dmm/gtl For Collection Of Delivery Fixation Letter. As Soon As The Balance Sale Value Is Received By Railways Online, Delivery Order Will Be Issued Immediately, To Facilitate The Purchaser To Raise An Online Request For Fixation Of Delivery Point. 9) Railways Does Not Guarantee For Quality, Quantity Description Etc.

Description: Scrap Condemned Electric Loco No. 23321/wag5/taochi/asn As Is Where Is Basis . The Loco Will Be Sold Without Following Excluded Fittings (i) Wheel Sets With Axle- 06 Nos, (ii) Axle Boxes- 12 Nos , (iii) Bull Gear- 06 Nos . Condition- 1.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 2. Details Of Serviceable Items Which Have Been Removed From The Condemned Loco Have Been Uploaded As Image In Lot Details Page And Is Also Available With The Custodian,,3. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 4.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 5. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 6. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 7. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 8. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 9. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 10. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 11. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 12. Gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv. 13.ground Rent Is To Be Imposed @ 0.5 ( Half)% Of The Value Of The Materials Yet To Be Lifted Per Day Or Part Of A Day Before Initiating Delivery Of The Remaining Un-lifted Materials In Case Of Failure To Lift The Entire Sold Materials Due To The Fault Of The Purchaser's Own Within The Stipulated Free Time Period.

Description: Scrap Condemned Electric Loco No. 23317/wag5/taochi/asn As Is Where Is Basis . The Loco Will Be Sold Without Following Excluded Fittings (i) Wheel Sets With Axle- 06 Nos, (ii) Axle Boxes- 12 Nos , (iii) Bull Gear- 06 Nos . Condition- 1.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 2. Details Of Serviceable Items Which Have Been Removed From The Condemned Loco Have Been Uploaded As Image In Lot Details Page And Is Also Available With The Custodian,,3. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 4.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 5. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 6. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 7. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 8. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 9. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 10. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 11. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 12. Gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv. 13.ground Rent Is To Be Imposed @ 0.5 ( Half)% Of The Value Of The Materials Yet To Be Lifted Per Day Or Part Of A Day Before Initiating Delivery Of The Remaining Un-lifted Materials In Case Of Failure To Lift The Entire Sold Materials Due To The Fault Of The Purchaser's Own Within The Stipulated Free Time Period.

Description: CATEGORY: Gift Pen (Q4) , Register (V2) (Q4) , Ball Point Pens (V2) as per IS 3705 (Q4) , Markers for White Board (V2) (Q4) , Permanent Marker Pen (Q4) , Permanent Paint Markers (V2) (Q4) , Exam Pad (V2) (Q3) , Plain Copier Paper (V3) ISI Marked to IS 14490 (Q4) , conference folder (Q4) , knife blades (Q4) , Eraser (Q4) , Black Lead Pencils (V2) as per IS 1375 (Q4) , Glue Stick (V2) (Q4) , Highlighter Pen (Q4) , Pen Stand (V2) (Q4) , Transparent Tape (V2) (Q4) , Fluid Correction Pen (V2) (Q4) , Fountain Pens (V2) (Q4) , Report Cover (Q4) , Flexible transparent sheet (Q3) , Double sided tape (Q4) , Colour Pencil (V2) (Q4) , Paper Adhesive, Liquid Gum and Office Paste Type as per IS 2257 (Rev) (Q3) , Laminating Pouch (Q4) , stamp pads (Q4) , Metric Scales (Plastic) for General Purposes as per IS 1480 (Q4) , Desk Pads - Writing (V2) (Q4) , Student Diary (Q4) , Ring Binder - File Folder (Q4) , Self Adhesive Flags (V2) (Q4) , Sticky Notepad (Q3) , Sketch Pen (V2) (Q4) , Correspondence Envelopes (V2) (Q4) , Graph paper (Q4) , Stapler Pin / Staples (V2) (Q4) , pin cushions (Q4) , Photography Paper (V2) (Q4) , File Folder Cover (V2) (Q4) , Binding Covers (Q4) , signaturebook folder (Q4) , scissors (Q4) , Staplers (V2) (Q3) , Tags for Files (V2) as per IS 8499 (Q4) , Tape Dispensers (V2) (Q3) , Binder Clips (V2) (Q3) , Carbon Papers as per IS 1551 (Q4) , Paper weights (Q4) , Laminating Film Rolls (Q4) , Rollerball Pen (V3) (Q4) , Ink Refills (V2) (Q4) , Automotive Vehicles - Retro - Reflective Sheets and Tapes (Traffic Safety) as per IS 14221 (Q4) , pH Paper (Q4) , Drawing Exercise Book (Q4)

Details: Description :12volt,180ah,lead Acid Battery In Duly Charged Condition Types Of Lead Acid Battery L ead-acid Battery Should Confirm To Is:14257/1995 Or Latest(indian Standard For Lead Acid Storage Ba tteries For Motor Vehicles With Light Weight And High Cranking Performance Specification) With C-20 Ra te Of Discharge Characteristics. Nominal Voltage Of Battery (volts) 12 Volt Rated Capacity At C20 Disc harge (ah) 180 Ah Warranty (years) 2 Years Battery Condition Charged Dimensions (l X W X H) (mm x Mm X Mm) As Per Relevant Is Specifications Rate Of Discharge Characteristics C-20 The Battery Sho uld Able To Sustain Tickle/boost Charge As Per The Requirement Of Site Yes The Batteries Should Be A Lo w Maintenance Free Battery Yes Make : Sf Standard Furukawa Or Exide Or Dynamic Powers Or De w-x Or Amco Or Amaron Or Dynex Or Tata Green Batteries ]

Description: Scrap Condemned Diesel Loco No.13195 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set),10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set ) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.

Description: Scrap Condemned Diesel Loco No.13166 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set) ,10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.

Description: Scrap Condemned Diesel Loco No.13187 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set) ,10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.

Description: Scrap Condemned Diesel Loco No.13188 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set),10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.