Uttarakhand Urban Sector Development Agency Tender
View complete overview of Uttarakhand UUSDA Tender
Uttarakhand Urban Sector Development Agency - UUSDA Tender
Eprocure
Opening Date13 Jan 2021
Closing Date22 Feb 2021
Tender Amount₹ 77,57,91,804
Costs
EMD
₹ 2,16,00,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Summary
Development Of Sewerage System Involving Stp, Trunk Sewer And Allied Works Including 5 Years Operation And Maintenance, At Nainital In Uttarakhand (ww-ntl-01).
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_USADB_28911_1Bid Award Id
ViewTender No
UUSDA/P-78/40Tender Authority
Uttarakhand Urban Sector Development Agency ViewPurchaser Address
-Website
http://https://uusdip.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Bill No-2
-
-
-
Excavation of earth below G.L. by manually or by mechanical means for laying of Sewers, Man-Holes, Gully Pits, Chambers etc. in soil including extra excavation below inverts, trimming & dressing of sides, levelling and back filling of trenches by excavated earth in 20 cm layers,watering and ramming the same including removal of surplus earth or other dismantled material up to a distance of 50 meters from the center of trenches and cleaning of site properly after completion of the work as per the technical specification and as per the direction of Employer's Representative.
-
-
-
Ordinary soil
-
-
-
0 to 1.5 m below G.L
1153
-
-
1.5 to 3.0 m below G.L
376
-
-
3 to 4.5 m below G.L
50
-
-
4.5 to 6.0 m below G.L
50
-
-
Same as item no. 1 but excavation in Soil mixed with morum,shingle & kankar etc. using of any specials T&P, if required.
-
-
-
0 to 1.5 m below G.L
5719
-
-
1.5 to 3.0 m below G.L
1640
-
-
3 to 4.5 m below G.L
50
-
-
4.5 to 6.0 m below G.L
50
-
-
Same as item no. 1 but excavation in Weatherd, Decomposed or Soft Rock by chiselling or by using of any specials T&P, if required including stacking of usefull materials within 50m.
-
-
-
0 to 1.5 m below G.L
124
-
-
1.5 to 3.0 m below G.L
50
-
-
3 to 4.5 m below G.L
50
-
-
4.5 to 6.0 m below G.L
50
-
-
Same as item no. 1 but excavation in Hard Rock by chiselling or by using of any specials T&P, if required including stacking of usefull materials within 50m.
-
-
-
0 to 1.5 m below G.L
50
-
-
1.5 to 3.0 m below G.L
50
-
-
3 to 4.5 m below G.L
50
-
-
4.5 to 6.0 m below G.L
50
-
-
Extra rates for quantities of works, executed In or under water and/or liquid mud, including cost of dewatering as required.
-
-
-
Ordinary soil
-
-
-
upto 1.5 m depth
368
-
-
1.5 m to 3 m depth
274
-
-
3 m to 4.5 m depth
194
-
-
4.5 m to 6.0 m depth
135
-
-
Soil mixed with morum,shingle & kankar etc
-
-
-
upto 1.5 m depth
18
-
-
1.5 m to 3 m depth
16
-
-
3 m to 4.5 m depth
11
-
-
4.5 m to 6.0 m depth
10
-
-
Weatherd, Decomposed or Soft Rock
-
-
-
upto 1.5 m depth
18
-
-
1.5 m to 3 m depth
16
-
-
3 m to 4.5 m depth
11
-
-
4.5 m to 6.0 m depth
10
-
-
Hard Rock
-
-
-
upto 1.5 m depth
10
-
-
1.5 m to 3 m depth
10
-
-
3 m to 4.5 m depth
10
-
-
4.5 m to 6.0 m depth
10
-
-
Extra rates for quantities of works, executed In or under foul position, including cost of dewatering as required
-
-
-
Ordinary soil
-
-
-
upto 1.5 m depth
95
-
-
1.5 m to 3 m depth
33
-
-
3 m to 4.5 m depth
13
-
-
4.5 m to 6.0 m depth
10
-
-
Soil mixed with morum,shingle & kankar etc
-
-
-
upto 1.5 m depth
12
-
-
1.5 m to 3 m depth
14
-
-
3 m to 4.5 m depth
10
-
-
4.5 m to 6.0 m depth
10
-
-
Weatherd, Decomposed or Soft Rock
-
-
-
upto 1.5 m depth
12
-
-
1.5 m to 3 m depth
14
-
-
3 m to 4.5 m depth
10
-
-
4.5 m to 6.0 m depth
10
-
-
Hard Rock
-
-
-
upto 1.5 m depth
10
-
-
1.5 m to 3 m depth
10
-
-
3 m to 4.5 m depth
10
-
-
4.5 m to 6.0 m depth
10
-
-
Filling of earth in trenches or in embankment by available earth within a distance of 50m in the layers not exceeding 20 cm in thickness with consolidation of each layer by ramming with mechanical compector under optimum moisture content (OMC) to give atleast 95% of maximum dry density (proctor density). Boulders or broken rock pieces are not allowed in filling of earth etc complete as per technical specification & as per the direction of Employer's Representative.
92
-
-
Cartage of excavated earth from site to other place due to narrow lanes including proper staking, to reduce the earth load on trenches and making arrangement of path for local residents as per direction of Employer's Representative by Manual/Mechanical means on an average distance 300M
92
-
-
Re-cartage of excavated earth from staking place to site of work for refilling of trenches, by Manual/Mechanical means on an average distance 300 M.
92
-
-
Disposal of surplus excavated material by Mechanical/Manual means including loading, unloading, levelling at dumping site, including all lead & lift etc complete all as directed by Employer's Representative.
-
-
-
Excavated Earth
1075
-
-
Excavated Rock
98
-
-
Steel shoring in Manhole,shafts, wells, cesspits including strutting , shoring and packing cavities where required complete including all material, labour, tools etc. with all lead and lift complete in all working conditions like subsoil, water etc. and as directed by the Employer's Representative. (Measurement to be taken of the face area provided with shoring)
-
-
-
Depth upto 1.5 m
1151
-
-
Depth exceeding 1.5m but not exceeding 3.0m
517
-
-
Depth exceeding 3 m but not exceeding 4.5 m
43
-
-
Depth exceeding 4.5 m but not exceeding 6.0 m
11
-
-
Provide & fixing of Close Timbering in trenches/Manhole to be left in trenches(used timbering)
-
-
-
Depth upto 3 m below G.L
100
-
-
3 m to 6 m below G.L
100
-
-
6 m to 9 m below G.L
100
-
-
Dewatering of water in trenches under sub soil water condition including supply of all machine, operator, khalashi, POL, T&P, accessories required for proper completion of the work as directed by Employer's Representative.
575
-
-
Providing and fixing Barricading at site of work for restricting the general public using 40 mm dia M.S. pipe ("B" class) as vertical post with average spacing of 1.80 meter between two vertical posts, having height at least 1.5 m above road/ ground level and at least 30-45 cm below road/ ground level by making suitable size hole in road/ ground, providing and fixing suitably two rows of 100mm wide PVC Tape preferabley of red colour. The M.S. pipe shall be painted in red and white colour strips as per approved pattern as and when it becomes shabby but at least after every alternate shifting at new location. After shifting/ removal of barricading the hole shall be filled up properly and site is to be cleared in all respect. (Note: measurement is to be done in linear basis)
1500
-
-
Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/ bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Employer's Representative which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Employer's Representative. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Employer's Representative.(Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work).
1000
-
-
Providing, Laying, jointing, testing, commissioning of HDPE Pipes for sewer lines conforming to IS:14333-1996 and laying and jointing as per IS:7634 (Part-II) as amended up to date using PE 100 grade raw material. The type of jointing shall be electrofusion welding to connect HDPE pipes and for metal pipes/specials flanged joints shall be used. Pipe joints shall be water tight. Rate shall include all taxes, duties, freight charges etc. complete as per specifications and as directed by the Employer's Representativeincharge. HDPE Pipe - (PE 100) - PN6 class for following diameter of pipe etc complete in all respect as per the direction of Employer's Representative.
-
-
-
225mm dia
50
-
-
250 mm dia
50
-
-
280 mm dia
50
-
-
315 mm dia
50
-
-
355 mm dia
50
-
-
Supply,Laying,Jointing, testing & commissioning of following dia. D.I. K-7 S&S pipes with rubber gaskets to the site of work, lowering the same into trenches below ground level true to alignment, making the joints with approved EPDM quailty of rubber gaskets including cost of all jointing materials and testing etc. complete but excluding excavation and backfilling of trenches upto ground level.D.I. Pipe S&S K-7 (CONFORMING TO IS : 8329/2000).with internal cement mortar lining using sulphate resisting cement (SRC) etc. complete in all respect as per the direction of Employer's Representative.
-
-
-
800 mm dia
-
-
-
1.5 - 3 m depth
2750
-
-
3 - 4.5 m depth
250
-
-
4.5 - 6 m depth
42
-
-
Installlation of HDPE product pipe by HDD method for on gravity sewer including preparing and setting up the plant & equipment, preparing new pipe work, making of entry & exit pit upto 1.5 meter depth, installing new pipe work and commissioning system or making the system ready for commissioning by HDD operation including all related civil and mechanical work like excavation , shoring/strutting etc, drilling, stringing, reaming and pulling back the new pipe work on the designed bore path alignment , proper disposal drilling fluid, and backfill of site after completion etc complete in all respect as per the direction of Employer's Representative.
-
-
-
Pipe dia between 110 mm & 225mm dia in Soft soil/Mixed/Rocky strata
100
-
-
Pipe dia between 250 mm & 315mm dia in Soft soil/Mixed/Rocky strata
100
-
-
Pipe dia between 355 mm & 450mm dia in Soft soil/Mixed/Rocky strata
100
-
-
Installlation of product pipe by Micro Tunneling method including making of entry and exit pits, all related cilvil works like excavation, shoring/strutting, etc. And Ground Penetrating Radar survey, to protect any existing utilities at pipe installation location and restoration of site after complition, complete in all respect as per the direction of Employer's Representative. ( Upto 100 meter installation length )
-
-
-
Pipe dia above 600 mm & upto 900 mm dia in Soft soil/Mixed/Rocky strata
2042
-
-
Installlation of product pipe by Manual Jacking method including making of entry and exit pits, all related cilvil works like excavation, shoring/strutting, etc., manual shielded excavation, lowering of pipe segments in the jacking pit, laying and jointing of product pipeline through jacking process from the jacking pit after project completion as per the intructions of the Employer's Representative. all complete except the cost of the pipe.
-
-
-
Above 1000 mm & upto 1200 mm dia in Mixed strata
1101
-
-
Supply & Laying - Jointing of following dia. R.C.C. S&S pipes with rubber gaskets to the site of work, lowering the same into trenches below ground level true to alignment, making the joints with rubber gaskets and with necessary spun yarn soaked in bitumen jointing with 1:2 cement mortar in coarse sand including cost of all jointing materials and testing etc. complete but excluding excavation and backfilling of trenches upto ground level.Class Np-4
-
-
-
350 mm dia
50
-
-
400 mm dia
50
-
-
450 mm dia
50
-
-
500 mm dia
50
-
-
600 mm dia
50
-
-
Rectification of Existing utility lines (Water Sewer, electrical, telephone etc.) irrespective of diameter, damaged during execution including all civil work, all type of pipe work, all type of specials & fittings, T&P etc. all complete require to restore in original condition as per the technical specification and as directed by Employers Representative. Only one time measurement for same location shall be paid to the contractor for rectification.
61
-
-
Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete in all respect as per the direction of Employer's Representative..G.I. PIPE CONFORMING TO IS : 1239(PART-1)
-
-
-
15 mm dia
100
-
-
20 mm dia
100
-
-
25 mm dia
100
-
-
32 mm dia
100
-
-
40 mm dia
100
-
-
50 mm dia
100
-
-
65 mm dia
100
-
-
Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying & Jointing of full lenght S&S Centrifugally Cast (Spun) Ductile Iron Pipes including supply of 'EPDM' rubber gaskets confirming to IS: 5382-1985 with testing of pipe line complete.D.I. PIPE CONFORMING TO IS : 8329/2000 ,D.I. Pipe S&S K-7 etc. complete in all respect as per the direction of Employer's Representative.
-
-
-
100 mm dia
100
-
-
125 mm dia
100
-
-
150 mm dia
100
-
-
200 mm dia
100
-
-
250 mm dia
100
-
-
Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete.Employer's Representative.for the following diameters.
-
-
-
800 mm dia (15 mm thickness)
1255
-
-
1200 mm dia (15 mm thickness)
1050
-
-
Providing and applying Chemical resistance glass-flake epoxy coating on interal side of cashing pipe as per the technical specification, drawings & as per the direction of Employer's Representative
3000
-
-
Providing and applying External coating of 3 layer poly ethylene linning on cashing pipe as per the technical specification, drawings & as per the direction of Employer's Representative
3200
-
-
Cartage of materials by mechanical means including its loading unloading complete from Kathgodam railway station to Nainital
12251
-
-
Providing, fixing and constructing of pre-cast RCC M-40 grade circular manholes with internal dia 1.0 m and up to specified depth having pre-cast RCC M-40 grade circular manhole cover frame (ID 0.56m, OD 0.86m, height 0.20m), conical piece (top ID 0.56m, bottom ID 1.0m, vertical height 0.600m, wall thickness 125mm), and circular rings of required heights (ID 1.0m, height 150 / 300 mm, wall thickness 125mm which ) below conical piece as per required depth of manhole and having steel reinforcement in all pieces of manhole @ not less than 80 kg per cum of concrete, including cast-in-situ 150 mm thick PCC of grade M-10 (1:3:6) in foundation, PCC M15 grade in circular wall at bottom,400 G polythene sheet below PCC, wall thickness 200mm, height equal to OD of sewer pipe + 50 mm, PCC M15 grade benching and channel portion and up to top level of sewer pipe etc complete with curing compaction and form work, supplying and fixing heavy duty SFRC manhole cover as per IS 12592 , supplying and fixing plastic encapsulated MS footsteps, including cost of shuttering, steel reinforcement, testing for water tightness etc complete in all respect as per drawing, technical specification and the direction of the Employer's Representative. Total depth upto 1.0 m Note: - Excavation of earth work, road cutting & restoration will be measured and paid separately.
1
-
-
Providing and fixing pre-cast RCC M-40 grade circular ring of ID 1.0 m, wall thickness 125mm, height 150 / 300 mm for constructing extra depth of manhole for depth beyond 1.055m as per drawing.
1
-
-
Providing, fixing and constructing of pre-cast RCC M-40 grade circular manholes with internal dia 1.2 m and up to specified depth having pre-cast RCC M-40 grade circular manhole cover frame (ID 0.56m, OD 0.86m, height 0.20m), conical piece (top ID 0.56m, bottom ID 1.2m, vertical height 0.800 m, wall thickness 125mm), and circular rings of required heights (ID 1.2m, height 150/ 300/ 600/ 900mm, wall thickness 125mm) below conical piece as per required depth of manhole and having steel reinforcement in all pieces of manhole @ not less than 80 kg per cum of concrete, , including cast-in-situ 150 mm thick PCC of grade M-10 (1:3:6) in foundation,400 G polythene sheet below PCC, PCC M15 grade in circular wall at bottom, wall thickness 200mm, height equal to OD of sewer pipe + 50 mm, PCC M15 grade benching and channel portion and up to top level of sewer pipe etc complete with curing compaction and form work, supplying and fixing heavy duty SFRC manhole cover as per IS 12592, supplying and fixing plastic encapsulated MS foot steps, including cost of shuttering, steel reinforcement, testing for water tightness etc complete in all respect as per drawing,technical specification and the direction of the Employer's Representative. Total depth upto 1.25 m Note: -Excavation of earth work, road cutting & restoration and circular ring will be measured and paid separately.
1
-
-
Providing and fixing pre-cast RCC M-40 grade circular ring of ID 1.2m, wall thickness 125mm, height 150 /300/600/900mm for constructing extra depth of manhole for depth beyond 1.255m as per drawing.
1
-
-
Providing, fixing and constructing of pre-cast RCC M-40 grade circular manholes with internal dia 1.5m and up to specified depth having pre-cast RCC M-40 grade circular manhole cover frame (ID 0.56m, OD 0.86m, height 0.20m), conical piece (top ID 0.56m, bottom ID 1.5m, vertical height 1.10 m, wall thickness 125mm), and circular rings of required heights (ID 1.5m, height 150/300/600/900/1200 mm, wall thickness 125mm) below conical piece as per required depth of manhole and having steel reinforcement in all pieces of manhole @ not less than 80 kg per cum of concrete, including cast-in-situ 150 mm thick PCC of grade M-10 (1:3:6) in foundation,400 G polythene sheet below PCC, PCC M15 grade in circular wall at bottom, wall thickness 200mm, height equal to OD of sewer pipe + 50 mm , PCC M15 grade benching and channel portion and up to top level of sewer pipe etc complete with curing compaction and form work, supplying and fixing heavy duty SFRC manhole cover as per IS 12592, supplying and fixing plastic encapsulated MS foot steps, including cost of shuttering,steel reinforcement, testing for water tightness etc complete in all respect as per drawing, technical specification and the direction of the Engineer.Total depth upto 1.55 m Note: Excavation of earth work, road cutting & restoration and circular ring will be measured and paid separately.
1
-
-
Providing and fixing pre-cast RCC M-40 grade circular ring of ID 1.5m, wall thickness 125mm, height 150/300/600/900/1200mm for constructing extra depth of manhole for depth beyond 1.5m as per drawing.
1
-
-
Providing and constructing RCC circular manhole of various diameters and depths with RCC M 30 Grade concrete as per drawing & Specifiaction inlcuding RCC M-30 base over PCC M15 (1:2:4) bed,400 G polythene sheet below PCC and RCC M-30 wall, preparation of channel with PCC M15 (1:2:4) benching, fixing of manhole frame & its cover (SFRC Extra heavy duty (EHD-35) frame and cover of 56cm. dia. clear opening),centering and shuttering, providing and fixing PVC encapsulated footsteps, suitable connection of inlet and outlet pipes, curing ,testing of manholes etc.complete as per specification and drawing or as directed by the Employers Representative. Note:- Excavation of earth work and road cutting & restoration for manhole will be measured and paid separately.
-
-
-
900 mm internal diameter Concrete Manhole Type-A of Depth start from 910 mm
34
-
-
Extra depth for concret manhole Type A depth beyond 910 mm upto 1610 mm
20
-
-
1200 mm internal diameter Concrete Manhole Type-B of Depth start below 1610 mm
57
-
-
Extra depth for concret manhole Type B depth beyond 1610 mm upto 2110 mm
11
-
-
1500 mm internal diameter Concrete Manhole Type-C of Depth start below 2210 mm
42
-
-
Extra depth for concret manhole Type C depth beyond 2210 mm upto 5000 mm
33
-
-
1500 mm internal diameter Concrete Manhole Type-D of Depth start below 5000 mm
1
-
-
Extra depth for concret manhole Type D depth beyond 5000 mm upto 7500 mm
1
-
-
Providing and constructing RCC circular manhole of various diameters and depths with RCC M 30 Grade concrete as per drawing & Specifiaction inlcuding RCC M-30 base over PCC M15 (1:2:4) bed,400 G polythene sheet below PCC and RCC M-30 wall, preparation of channel with PCC M15 (1:2:4) benching, fixing of manhole frame & its cover (SFRC Extra heavy duty (EHD-35) frame and cover of 56cm. dia. clear opening),centering and shuttering (Shuttering shall be considered left out in position permanently ), providing and fixing PVC encapsulated footsteps, suitable connection of inlet and outlet pipes, curing ,testing of manholes etc.complete as per specification and drawing or as directed by the Employers Representative . Note:- Excavation of earth work and road cutting & restoration for manhole will be measured and paid separately.
-
-
-
900 mm internal diameter Concrete Manhole Type-A of Depth start from 910 mm
3
-
-
Extra depth for concret manhole Type A depth beyond 910 mm upto 1610 mm
1
-
-
1200 mm internal diameter Concrete Manhole Type-B of Depth start below 1610 mm
3
-
-
Extra depth for concret manhole Type B depth beyond 1610 mm upto 2110 mm
1
-
-
1500 mm internal diameter Concrete Manhole Type-C of Depth start below 2210 mm
2
-
-
Extra depth for concret manhole Type C depth beyond 2210 mm upto 5000 mm
1
-
-
1500 mm internal diameter Concrete Manhole Type-D of Depth start below 5000 mm
2
-
-
Extra depth for concret manhole Type D depth beyond 5000 mm upto 7500 mm
1
-
-
Providing HDPE / DI / MS pipes as per IS 14333 for drop connection externally for drop depth 0.60 m drop from branch sewer line to main sewer manhole or vise versa including inspection and cleaning eye, HDPE drop pipe and bend encased around with cement concrete M15 with all form work, cutting holes in walls and making good the wall , making required channels,400 G polythene sheet below PCC etc complete all as per drawings, specifications and as directed by Employers Representative.
-
-
-
110 mm dia
1
-
-
160 mm dia
1
-
-
225 mm dia
1
-
-
250mm dia
1
-
-
280 mm dia
51
-
-
315 mm dia
34
-
-
355 mm dia
1
-
-
Extra for additional drop depth of HDPE / DI / MS pipes as per IS 14333 drop connection beyond 0 .6 m complete as per standard specification and the direction of the Employers Representative.
-
-
-
110 mm dia
1
-
-
160 mm dia
1
-
-
225mm dia
1
-
-
250mm dia
1
-
-
280 mm dia
10
-
-
315 mm dia
7
-
-
355 mm dia
1
-
-
Supplying and filling sand in pipe bedding, including watering, ramming, consolidating and dressing etc complete all as per specification or as per direction of the Employer's Representative.
100
-
-
Providing & laying Granular bedding with graded hard crusher broken stone of 100% passing through 20mm sheive, 20 to 50 % passing through 10mm sheive and 100 % retain on 6.3mm sheive, laying in layers of thickness 10/15cm including ramming, consolidation etc complete for all type of pipes of following sizes as per drawing and or as directed by Employer's Representative.
50
-
-
Providing, fixing and erecting precast RCC (M20) Vent shaft with cowl, 125mm and 225mm internal and external dia respectively at top, 300mm and 450mm internal and external dia at bottom and 9.0m over all length, bottom 1.175m below ground level fixed in the pit of size 900mmx900mmx1550mm with PCC M15, 250mm thick in bed,400 G polythene sheet below PCC and minimum 225 mm thick in wall , junction of vent shaft and concrete grouted with cement mortar 1:1 including making connection with sewer manhole with 150mm dia NP4 RCC pipe (IS 458-ammended upto date) as required including granular bedding complete as per standard design and finished with water proofing cement of approved brand as per drawings and/or as directed by Employer's Representative..
1
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) etc complete as per design and as per the direction of Employer's Representative.
671
-
-
Supply & Fixing 0.56 m Internal dia D.I. air-tight manhole cover with frame (Heavy duty minimum weight 80 kg.) with locking arrangement of material grade SG-500/7 as per IS 1865-1991 with grade designation c-250 as per EN-124 Ductile Iron, including testing and inspection as per guidelines of IS specifications , painting with sulphate resisting paint/ Bituminous paint etc complete.( Payment shall be made to the contractor on actual executed quantity basis and proportionately amount of SFRC manhole cover (with frame) shall be deducted from respective manhole item). All as per technical specification, drawing and as directed by Employer's Representative.
23
-
-
Supply & Fixing 0.56 m Internal dia D.I. air-tight manhole cover with frame (Extra heavy duty minimum weight 95 kg.) with locking arrangement of material grade SG-500/7 as per IS 1865-1991 with grade designation d-400 as per EN-124 Ductile Iron, including testing and inspection as per guidelines of IS specifications , painting with sulphate resisting paint/ Bituminous paint etc complete.( Payment shall be made to the contractor on actual executed quantity basis and proportionately amount of SFRC manhole cover (with frame) shall be deducted from respective manhole). All as per technical specification, drawing and as directed by Employer's Representative.
5
-
-
Providing and fixing in position SFRC manhole cover and frame of required shape and approved quality.EHD - 35.Circular shape 560 mm internal diameter etc complete as per the drawing,technical specification & as per the direction of Employer's Representative.
1
-
-
Providing and fixing in position SFRC manhole cover and frame of required shape and approved quality.H D - 20.Circular shape 560 mm internal diameter etc complete as per the drawing,technical specification & as per the direction of Employer's Representative.
1
-
-
Battery back up & wireless type level transmitters- providing, installation, testing and commissioning of level transmitter with : transmitter output : gsm + data logger sensor material :pp instrument range : 8m process connection :4" integral flange material of construction of flange :pp power supply :internal installed battery cable entry :two pin circular pg11connector no data logger
14
-
-
Providing ,laying & jointing of sewer house service connection pipe to individual housess from chamber inside the property to either road side chamber or street manhole .Works includes supply and delivery of plain ended with integral sockets plasticised polyvinylchloride (uPVC) Pipes with ISI mark intended for underground (buried)_ non pressure gravity sewer applications conforming to IS:15328:2003 with latest amendments for different sizes and stiffness classes as per specifications including identification of location of existing chamber / sleeve.The pipes may be joined using elastomeric sealing rings.The elastomeric sealing rings required for jointing of ring tight uPVC Pipes and shall in accordance with one of the types (Type 1 to Type 6) of IS 5382. Including excavation (in water mud or under foul condition, dismantling of all type of roads like BT, CC, Stone, Paver blocks (all thickness and sizes), and floors likes kota stone, tile, manhole etc. Or any other type of floooring as per site condition, dewatering, refilling, compaction and disposal of surplus earth / unserviceable materials with all lead and lift at suitable disposal site as directed by Engineer. Making conncetion of drain or sewer line with existing manhole including breaking into and making good the walls, floors, with cement concrete of grade 1:2:4, uPVC specials like bends, tees, couplers,etc.) shall be provided as per site condition .All transportation,loading and unloading ,conveying to site,lowering ,laying and jointing of pipes ,75 mm thick sand/concrete bedding all around the pipe as per drawing and specifications shall be inclusive complete the work in all respect and as per specification and as directed by the Employer's Representative .(CC Floor restoration shall be paid saparately )
-
-
-
110 mm dia (Outer diameter)
4800
-
-
160 mm dia (Outer diameter)
900
-
-
Construction of chamber inside the premises of individual houses with clear inside opening of 300*300 mm having depth as per site condition with 230 mm thick Brick (FPS bricks of class designation 7.5) Masonary in CM 1:4 (1 cement : 4 coarse sand ), including inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls, 20 mm thick plaster on external surface with cement mortar 1:4 (1 cement : 4 coarse sand ) and bed concrete ,PCC M-15(1:2:4) (1 cement :2 fine aggregate : 4 course aggregate ) for bed of 150 mm thick & benching of as per drawing,400 G polythene sheet below PCC with precast (L D) cover slab .The work includes Coping in M-20 for fixing of frame,excavation ,refilling of excavated material with compaction ,fixing of uPVC Pipe of 110 mm dia as required .Work should be completed in all repect as per specifications ,drawing and as per directions of Employer's Representative.
5
-
-
Construction of chamber in side the premises of individual houses with clear inside opening of 400*400 mm having depth as per site condition with 230 mm thick Brick (FPS bricks of class designation 7.5) Masonary in CM 1:4 (1 cement : 4 coarse sand ), including inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls , 20 mm cement plaster with cement mortar 1:4 (1 cement : 4 coarse sand) on external surface of walls, and bed concrete ,PCC M-15(1:2:4) (1 cement :2 fine aggregate : 4 course aggregate ) for bed of 150 mm thick & benching, 400 G polythene sheet below PCC as per drawing with precast (L D) cover slab .The work includes Coping in M-20 for fixing of frame,excavation ,refilling of excavated material with compaction ,fixing of uPVC Pipe of 110 mm dia as required .Work should be completed in all repect as per specifications ,drawing and as per directions of Employer's Representative.
600
-
-
Construction of chamber out side the premises of individual houses with clear inside opening of 450*450 mm having depth as per site condition with 230 mm thick Brick (FPS bricks of class designation 7.5) Masonary in CM 1:4 (1 cement : 4 coarse sand ), including inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls, 20 mm cement plaster with cement mortar 1:4 (1 cement : 4 coarse sand) on external surface of walls, and bed concrete ,PCC M-15(1:2:4) (1 cement :2 fine aggregate : 4 course aggregate ) for bed of 150 mm thick & benching , 400 G polythene sheet below PCC as per drawing with precast (L D) cover slab .The work includes Coping in M-20 for fixing of frame,excavation ,refilling of excavated material with compaction ,fixing of uPVC Pipe of 110 mm dia as required .Work should be completed in all repect as per specifications ,drawing and as per directions of Employer's Representative.
300
-
-
Extra for over depth beyond 750 mm upto 1000 mm for property chamber
60
-
-
Supply & Fixing 450 mm square shape chamber cover with frame (Light duty minimum weight 20 kg.) with locking arrangement of material grade SG-500/7 as per IS 1865-1991 with grade designation c-250 as per EN-124 Ductile Iron, including testing and inspection as per guidelines of IS specifications , painting with sulphate resisting paint/ Bituminous paint.( Payment shall be made to the contractor on actual executed quantity basis and proportionately amount of pre-cast rcc cover (with frame) shall be deducted from respective chamber ). All as per technical specification, drawing and as directed by Employer's Representative.
60
-
-
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.M D - 10.Square shape 450 mm internal dimension as per direction of Employer's Representative.
1
-
-
Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials with all leads & lifts, stacking serviceable and unserviceable materials separately etc complete as directed by Employer's Representative.
100
-
-
Dismantling of flexible pavements and disposal of dismantled materials with all lead and lifts, stacking serviceable and unserviceable materials separately as per Technical Specification etc complete as directed by Employer's Representative.
274
-
-
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material with all leads and lifts as per direction of Employer's Representative.
100
-
-
Disposal of surplus dismantlled/ unserviceable material obtained from road cutting by mehancical/Manual means including loading, unloading with all leads & lifts, to the dumping site as per the directions of the Employer's Representative
374
-
-
Stripping, storing and preservation of top soil by keeping it damp in stock piles and keep wet till it is used by road side at 15 m internal and re-application on embankment slopes, cut slopes and other areas in localities where the available embankment material is not conducive to plant growth as per Technical Specification Clause 302.3.2 & as per the directions of the Employer's Representative
105
-
-
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.
280
-
-
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, etc complete as per Technical Specification, drawings and as directed by Employer's Representative.
149
-
-
Granular sub-base/base/surface course with local materials by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Technical Specification drawings and as per the direction of Employer's Representative. .Using Gravel mix soil
53
-
-
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Technical Specification,drawings & as per the direction of Employer's Representative.
53
-
-
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification ,drawings & as per the direction of Employer's Representative.
-
-
-
By Mechanical means
149
-
-
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification ,drawings & as per the direction of Employer's Representative.
-
-
-
By Mechanical means
149
-
-
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom etc complete as per Technical Specification , drawings & as per the direction of Employer's Representative.
1345
-
-
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means etc complete as per Technical Specification, drawings & as per the direction of Employer's Representative.
1345
-
-
Providing and laying Dense Bituminous Macadam with 100-120 TPH.Grading I - 37.5mm nominal size batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.25% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification etc complete in all respects & as directed by Employer's Representative.
87
-
-
Providing and laying Semi Dense Bituminous Concrete with 100-120TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification etc complete in all respects & as directed by Employer's Representative. Grading I - 13mm using Bitumen VG - 10
34
-
-
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat etc complete as per Technical Specification, drawings & as directed by Employer's Representative.
100
-
-
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall etc complete as per Technical Specification ,drawings & as directed by Employer's Representative.
100
-
-
Providing & laying Cement Concrete with coarse sand and 40 mm gauge stone ballast over a prepared sub-base in proportion 1:3:6 including supply of all material,labour,400 G polythene sheet below PCC and T&P etc complete as per drawings and technical specifications & as directed by Employer's Representative.
225
-
-
Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels,rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings, technical specifications & as directed by Employer's Representative.
100
-
-
Providing and fillling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight.for expansion joints
500
-
-
Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm including 30 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. etc complete as per drawings and Technical Specification
50
-
-
Providing and Laying of Interlocking Concrete Block Pavements having thickness 60 mm including 30 mm thick compacted bed of coarse sand, filling the joints with fine sand etc.complete as per drawing,Technical Specification & as per the direction of Employer's Representative.
30
-
-
Laying serviceable cement concrete interlocking paver blocks of any design/shape/thickness laid in required line, level, curvature,colour and pattern over and including 30 mm thick compacted bed of coarse sand , filling the joints with fine sand etc. all complete as directed by the Employer's Representative .
20
-
-
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per the drawing, technical specifications & as per the direction of Employer's Representative .
200
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) ) FOR Floor restoration
225
-
-
Supply and fixing of MS delineators 1000 mm long , having a diameter of 75 mm and thickness 4mm and having atleast 3 different colour strips of 75 mm wide Type IV retroreflective tape around the black painted pole attached with 150 mm x 25 mm x 6 mm MS flats welded at bottom to be fixed in M15 concrete base as directed by the Engineer in Charge as per IRC: 79 (Recommended Practice for Road Delineators) and Clause no. 806 of MORTH specifications as directed by Employer's Representative.
1000
-
-
Providing and fixing Bi-directional Road Studs (Cat Eye) / Reflective Pavement Marker (RPM) with single body twin shank and plastic body moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (Hi-impact Polystyrene) or ABS (Acrylonitrile Butadiene Styrene) or any other suitable material approved by Employer's Representative (Marker must support a load of 13635 kg tested in accordance with ASTM D 4280 and Reflective lenses conforming to ASTM D 788 or equivalent) bonded or anchored within the road surface for lane marking and delineation for night time visibility as per MORTH specifications & as directed by Employer's Representative.
500
-
-
Providing and fixing of corrosion resistant 2mm thick Type IV retroreflective cautionary, mandatory, informatory sign board with 7 year warranty as per IRC:67, made of high intensity sheeting fixed over ACP (Aluminium Composite Panel) 3 mm thick (including framing and bracing with fabrication, plotting, pasting, riveting, taping and nut, bolts, washers and rivets etc for fixing), supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level etc complete as per technical specification, approved drawing & as directed by Employer's Representative.
-
-
-
800 x 600 mm Rectangle
10
-
-
600 x 450 mm Rectangle
10
-
-
900mm high Octagon
10
-
-
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.) & as directed by Employer's Representative.
600
-
-
Providing & fixing of rumble strips of premix bituminous carpet, 25 mm high at centre, 300 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking paint etc complete & as directed by Employer's Representative.
50
-
-
Providing & fixing Plastic speed breaker (rumble strip) in Yellow and black colour of size 250 mm X350 mm x75 mm including all fixing material like nut,bolt etc complete & as directed by Employer's Representative.
50
-
-
Air quality monitoring:
60
-
-
Noise levels monitoring
60
-
-
Ground Water Quality
60
-
-
Surface Water Quality
60
-
-
Soil Quality
60
-
-
Bill No-3
-
-
-
Civil and Building Works (Including Foundation) PROCESS UNITS For TSPS
1. Coarse Screens including inlet and outlet channels
2. Wetwell, valve room, panel room
1.2 FOR STP
1. Inlet chamber, Fine Screens and Grit chambers including inlet and outlet channels
2. Aeration Basins including Anoxic basins, inlet and outlet chambers
3.Disc Filtration system (if applicable) 4. Chlorine Contact Tank including mixing tank, inlet and outlet chambers
5. Sludge collection tank
6. Gravity sludge thickener
7. Thickened sludge collection tank
8. Septage co-treatment
1.3 BUILDINGS
1. Process Air Blower building 2. Chlorine building
3.Thickener feed pumping station
4. Thickened sludge pumping station
5. Centrifuge Building 6. Plant Water Pump Station
7. Building details for TSPS
1.4 SUBSTATION FOR STP & SPS
1. Sub Station
2. Switch gear room
3. Transformer yard
1.5 UTILITY BUILDING
1. Administration Cum Laboratory Building & SCADA building
2. D.G Room including Outdoor diesel tank
3. Interconnecting channels and pipes,overflow, bypass arrangement
1.6 OTHER UTILITIES
1. Roads & Drains 2. Landscaping
3. Tree Plantation
4. Furniture & Lab Equipment
1
-
-
Mechanical Systems Installation, testing and commissioning of Mechanical equipments at STP and SPS with following equipments as per scope, specification and drawings. For TSPS
1. Inlet chamber 2. Sluice Gates 3. Coarse Screen Channel
4. Inlet & Outlet sluice gates, Mechanical Coarse Screens, Belt Conveyor, Handling Equipment
5. Wet well
6. Pumps, valves, piping,Crane For STP
1. Inlet chamber 2. Sluice Gates 3. Fine Screen Channel 4. Inlet & Outlet sluice gates, Mechanical Fine Screens, Belt Conveyor, Handling Equipment 5. Degritting Chamber
6. Detritor with complete scraping mechanism, Rake Classifier, Organic return pump and accessories
7. Anoxic and Aeration Basin and Secondary/Tertiary treatment 8. Inlet & Outlet sluice gates 9. Submersible Mixer for Anoxic Basin and complete accessories
10. Fine Bubble Diffuser Aeration system complete with Pipe Grid and accessories
11. Secondary Clarifier/SBR Decanter with all accessories
12. Disc filters 13. Process Air Blowers with suction & Discharge Silencers, Filters, Acoustic Hood, Piping with Valves and accessories
14. RAS pumps,Valves and Piping etc.
15. EOT Cranes and Hoists, Jib Cranes
16. Chlorination System
17. Chlorine storage equipment
18. Chlorinators, chlorine pipework, dosing system, leak detection,scrubber, ventilation and accessories
19. Safety Equipment
20. EOT Cranes, Lifting Beam and Accessories
21. Motive water Pumps and Piping
22. Sludge Storage, Thickening, Treatment & Disposal
23. Polyelectrolyte dosing systems, storage tanks and pipework
24. Continuous thickeners, bridge, picket fence, scraper, thickener feed pumps and pipework, protection devices
25. Thickener Supernatant return system 26. Thickened sludge pump , stirrer 27. Dewatering centrifuge and solid waste handling system, Filtrate Discharge Pumping system
28. Ventilation system, EOT Crane & Hoists and Accessories
29. Service Water System
30. Wastewater and Sludge Sampling
1
-
-
Electrical Systems Installation, testing and commissioning of Electrical equipments at Substation building at STP with following equipment as per scope, specification and drawings. 1. 11kV RMU for STP & SPS
2. 0.415kV Diesel Generator Sets complete with AMF Control Panel & Acoustic Enclosure at Substation for STP,SPS & TSPS
3. 11kV / 0.433kV Transformers for STP & SPS
4. 415V Capacitor banks with Automatic Power Factor Correction Relay for STP & SPS
5. Installation, testing and commissioning of Motor Control Centres , Distribution boards etc at various locations in STP, SPS & TSPS with following equipment ,items as per scope, specification and drawings. 6. 415V metal enclosed switchboard PMCC for STP,SPS & TSPS
7. Mixer MCC for STP & SPS
8 Sludge Handling System MCC STP & SPS
9. Centrifuge Building MCC STP & SPS
10. Raw Sewage Pump House MCC STP & SPS
11. Electrical Hoist Panel STP & SPS
12. Main Lighting DB STP & SPS
13. Local Push Button Stations STP & SPS
14. Variable Frequency Drives STP & SPS 15. Installation, testing and commissioning of Lighting System at STP & TSPS with following equipment, items as per scope, specification and drawings.
16. Lighting Fixtures
17. Lighting panels
18 Switchboards , Receptacles, Power Plug & Sockets, Switches, Ceiling fans with regulators etc
19. Point wiring with conduits ,wires, supports etc for Lighting fixtures, Receptacles, Switches , Ceiling fans etc
20. Street Lighting and Area Lighting poles with Junction boxes and Over hang
21. Installation, testing and commissioning of L.T Cabling System , HT/LT Cable Carrier System at STP & TSPS with following components as per scope, specification and drawings. 22. L.T cables for STP & SPS
23. L.T Cable termination with glands and lugs for STP & SPS
24. Cable trays on supports for both LT and HT Cables for STP & SPS
25. Hume Pipe/RCC Pipe
26. Installation, testing and commissioning of Earthing & Lightning Protection System at STP & TSPS with following components as per scope, specification and drawings. 27. Earthing Conductor for outdoor main grid
28. Earthing conductor for indoor main grid
29. Earthing conductors for outdoor equipments
30. Lightning Arrestors and Down Conductors
31. Earthing conductor for indoor equipments
32. Treated Earth pits
33. General earth pits
34 Installation, testing and commissioning of safety procedures for Electrical Equipments at STP & TSPS as per scope, specification and drawings.
1
-
-
Instrumentation & Automation works Installation, testing and commissioning of Instrumentation & Control equipments at STP and TSPS as per scope, specification and drawings. 1. Instrumentation System To provide the following system for
2. Flow Measurement+ Accessories +fittings
3. Air flow measurement+ Accesories+fittings
4. Level Measurement+ Accesories+fittings
5. Pressure Indicating transmitters+ Accesories+fittings
6. Pressure indicators/guages+ Accesories+fittings
7. Limit Switches+ Accesories+fittings
8. Control Air Pressure Switch+ Accesories+fittings
9. Temperature Transmitter+ Accesories+fittings
10. Junction Boxes+Enclosures
11. Instrumentation Earthing
12. Two & Three Position Selector Switches+fittings
13. Flow Integrator Totalizer+fittings
14. Panel mounted Digital Indicators+fittings
15. Temperature Scanner Indicators+fittings
16. Multi Function Energy Meters+fittings
17. Surge Protection devices+fittings
18. Level Switches+ Accessories+fittings
19. Alarm Annunciators+ hooters+fittings
20. Weight Indicator Transmitter+ Accesories+fittings
21. Instrumentation system to provide the following for Analytical Instruments (Installation, testing & commissioning)
22. Dissolved Oxygen Analyzer+ Accesories+fittings
23. ORP Analyzer+ Accessories+ fittings
24. Residual chlorine analyzer+ Accesories+fittings
25. pH Analyzer+ Accesories+fittings
26. H2S Analyzer+ Accesories+fittings
27. Instrumentation Cables/cable trays
28. Instruments/Control Cables, OFC, Trays, Glands & Lugs,cable conduits
29. cable trays
30. Control System To provide the following system (Installation, testing & commissioning)
31. Liquid processes
32. Solid processes/sludge treatment
33. Disc filtration system
34. Chlorination
35. Chemical System
36. Substation/D.G.
37. Automation system(PLC based SCADA system) for STP (Installation, testing & commissioning)
38. Master (Redundant Hot Stand by) & Slaves PLC Configuration Plant floor terminal 39. PLC CPU power supply module
40. Communication Module 41. RIO Modules along with Panels
42. PLC Programming software
43. SCADA software(dual redundant configuration)
44. Historian software
45. PLC wired enclosures
46. Surge Protection devices
47. SMPS for Automation System
48. Industrial Type Ethernet Switch
49. commercial grade server PC
50. 52" LCD Screen with accessories and Commercial Grade PC
51. Redundant RTU+GPRS modem in redundant configuration for integration with SCADA center
52. Redundant FOC equipment +cabling 53. Computer
54. system console/SCADA furniture
55. Engineering work stations PC
56. UPS
57. Printers
58. Printer server
59. Interposing Relays with base terminal
1
-
-
Providing, Testing & Commissioning of Package STP of Following Capacities:
-
-
-
20 KLD Package STP -2 Nos
40
-
-
40 KLD Package STP -3 Nos
120
-
-
Testing Requirements
Factory acceptance tests(FAT)
Site acceptance tests(SAT) Testing and Commissioning of the Entire System
1
-
-
Clearing grass and removal of rubbish with all leads & lifts outside the periphery of the area as per Technical Specification Clause 201 & as directed by Employer's Representative
2
-
-
Cutting of Trees including Cutting of Trunks, Branches and Removal of Stumps Cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts etc complete as per Technical Specification & as per the direction of Employer's Representative.Girth upto to 600 mm
-
-
-
Girth upto to 600 mm
5
-
-
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead as per Technical Specification Clause 202 & as directed by Employer's Representative
-
-
-
Cement Concrete
50
-
-
Reinforced Cement Concrete
50
-
-
Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead as per Technical Specification Clause 202 & as directed by Employer's Representative
100
-
-
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202 & as directed by Employer's Representative
-
-
-
Upto 600 mm dia Hume pipe
100
-
-
Above 600 mm to 900 mm dia Hume pipe
100
-
-
Dismantling Kerb Stone Channels Dismantling kerb stone channels by manual/mechanical means and disposal of dismantled material with all lifts and lead as per Technical Specification Clause 202 & as directed by Employer's Representative
1000
-
-
Removal of telephone/electric poles with wires including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and lead and stacking the serviceable and unserviceable material separately as per Technical Specification Clause 202 & as directed by Employer's Representative
10
-
-
Brick masonry work in cement mortar in foundation upto plinth complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 & as directed by Employer's Representative
50
-
-
Stone masonry work in cement mortar in foundation upto plinth complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 & as directed by Employer's Representative.Random Rubble Masonry In cement mortar 1:4
50
-
-
Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal of surplus material as per direction of engineer - in - charge, as per drawing, technical specifications Clause 305.1 of MORD Specifiction & as directed by Employer's Representative
1114.5
-
-
Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing, technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction & as directed by Employer's Representative
534
-
-
Pointing with cement mortar (1:3) on brickwork/stone work as per drawing and technical specification Clauses 613.3 and 1204 & as directed by Employer's Representative
713
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
M 10 (Nominal mix 1:3:6)
60
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Employer's Representative.
-
-
-
All work upto plinth Level
107
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Employer's Representative.
-
-
-
All work above plinth level
50
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding Thermo-Mechanically Treated bars of grade Fe-500D or more.in foundation complete as per drawings, technical specifications Clauses 1000 and 1202 & as directed by Employer's Representative
11
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding Thermo-Mechanically Treated bars of grade Fe-500D or more.in Superstructure complete as per drawings, technical specifications Clauses 1000 and 1202 & as directed by Employer's Representative
5
-
-
Centering and shuttering including strutting, propping etc. and removal of form work for as per the technical specification & as directed by Employers Representative :
-
-
-
Foundations, footings, bases for columns
66
-
-
Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
330
-
-
Columns, piers, abutments, pillars, posts and struts
50
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete as per direction of Employer's Representative.
100
-
-
Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing ,Technical specifications & as directed by Employer's Representative
36
-
-
(Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408) & as directed by Employer's Representative
500
-
-
Bill No- 6
-
-
-
First Year of O&M
-
-
-
Fixed
-
-
-
Manpower +
12
-
-
Variable
-
-
-
Chemical Usage ++
-
-
-
Chlorine
116508
-
-
Poly Electrolyte
8625
-
-
Alum
92874.25
-
-
Laboratory consumables (glass wares etc.)
1
-
-
Transportation and Disposal of Sludge, Grit, Screenings
18250
-
-
Maintenance (1st year DLP Period)
1
-
-
O & M Cost (Flushing manholes)
1
-
-
O & M Cost (Package STP)
-
-
-
Package STP 1- 20 KLD
1
-
-
Package STP 2- 20 KLD
1
-
-
Package STP 3- 40 KLD
1
-
-
Package STP 4- 40 KLD
1
-
-
Package STP 5- 40 KLD
1
-
-
Second Year of O&M
-
-
-
Fixed
-
-
-
Manpower +
12
-
-
Variable
-
-
-
Chemical Usage ++
-
-
-
Chlorine
116508
-
-
Poly Electrolyte
8625
-
-
Alum
92874.25
-
-
Laboratory consumables (glass wares etc.)
1
-
-
Transportation and Disposal of Sludge, Grit, Screenings
18250
-
-
Maintenance (1st year DLP Period)
1
-
-
O & M Cost (Flushing manholes)
1
-
-
O & M Cost (Package STP)
-
-
-
Package STP 1- 20 KLD
1
-
-
Package STP 2- 20 KLD
1
-
-
Package STP 3- 40 KLD
1
-
-
Package STP 4- 40 KLD
1
-
-
Package STP 5- 40 KLD
1
-
-
Third Year of O&M
-
-
-
Fixed
-
-
-
Manpower +
12
-
-
Variable
-
-
-
Chemical Usage ++
-
-
-
Chlorine
116508
-
-
Poly Electrolyte
8625
-
-
Alum
92874.25
-
-
Laboratory consumables (glass wares etc.)
1
-
-
Transportation and Disposal of Sludge, Grit, Screenings
18250
-
-
Maintenance (1st year DLP Period)
1
-
-
O & M Cost (Flushing manholes)
1
-
-
O & M Cost (Package STP)
-
-
-
Package STP 1- 20 KLD
1
-
-
Package STP 2- 20 KLD
1
-
-
Package STP 3- 40 KLD
1
-
-
Package STP 4- 40 KLD
1
-
-
Package STP 5- 40 KLD
1
-
-
Fourth Year of O&M
-
-
-
Fixed
-
-
-
Manpower +
12
-
-
Variable
-
-
-
Chemical Usage ++
-
-
-
Chlorine
116508
-
-
Poly Electrolyte
8625
-
-
Alum
92874.25
-
-
Laboratory consumables (glass wares etc.)
1
-
-
Transportation and Disposal of Sludge, Grit, Screenings
18250
-
-
Maintenance (1st year DLP Period)
1
-
-
O & M Cost (Flushing manholes)
1
-
-
O & M Cost (Package STP)
-
-
-
Package STP 1- 20 KLD
1
-
-
Package STP 2- 20 KLD
1
-
-
Package STP 3- 40 KLD
1
-
-
Package STP 4- 40 KLD
1
-
-
Package STP 5- 40 KLD
1
-
-
Fifth Year of O&M
-
-
-
Fixed
-
-
-
Manpower +
12
-
-
Variable
-
-
-
Chemical Usage ++
-
-
-
Chlorine
116508
-
-
Poly Electrolyte
8625
-
-
Alum
92874.25
-
-
Laboratory consumables (glass wares etc.)
1
-
-
Transportation and Disposal of Sludge, Grit, Screenings
18250
-
-
Maintenance (1st year DLP Period)
1
-
-
O & M Cost (Flushing manholes)
1
-
-
O & M Cost (Package STP)
-
-
-
Package STP 1- 20 KLD
1
-
-
Package STP 2- 20 KLD
1
-
-
Package STP 3- 40 KLD
1
-
-
Package STP 4- 40 KLD
1
-
-
Package STP 5- 40 KLD
1
-
-
Bill No-7
-
-
-
All Labour
-
-
-
Gang supervisor
300
-
-
Labourer
600
-
-
Joiner & Carpenter
300
-
-
Welder
100
-
-
Steel Fixer
300
-
-
Steel Erector
300
-
-
Bricklayer
200
-
-
Pipelayer
500
-
-
Concreter
200
-
-
Motor Driver
200
-
-
Plant Operator
300
-
-
Electrician
200
-
-
Cable Jointer
100
-
-
Fitter
200
-
-
Painter
200
-
-
Plumber
200
-
-
Watchman
200
-
-
Design Staff
-
-
-
Civil Engineer
100
-
-
Structural Engineer
200
-
-
Mechanical Engineer
100
-
-
Electrical Engineer
100
-
-
Instrumentation & Control Engineer
100
-
-
Sewage Treatment Process Engineer
100
-
-
CAD Operator
200
-
-
Design Assistant
200
-
-
All Equipment
-
-
-
Backhoe excavator
100
-
-
8t/10t Road roller
100
-
-
Dumper truck (10 t)
100
-
-
Mobile crane (10 t)
100
-
-
Concrete pump
100
-
-
Compressor (including all tools)
100
-
-
Welding set (including consumables)
100
-
-
Gas cutting set (including consumables)
100
-
-
Diesel generator (5 kVA)
100
-
-
Pump (100 mm)
200
-
-
Pump (150 mm)
100
-
-
Concrete mixer (0.25 cu.m)
100
-
-
Concrete Vibrator
100
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements