Uttarakhand Tourism Development Board Tender
View complete overview of Uttarakhand UTDB Tender
Uttarakhand Tourism Development Board - UTDB Tender
Real Estate Service
Eprocure
Opening Date17 Aug 2024
Closing Date10 Oct 2024
Tender AmountRefer Documents
Costs
EMD
₹ 50,32,460Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UTADB_74716_1Bid Award Id
ViewTender No
2794/2-6-1145(ADB)/2024 dated 16/08/2024Tender Authority
Uttarakhand Tourism Development Board ViewPurchaser Address
-Website
http://uktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in- charge.
2.7.1 Ordinary rock
2069.35
-
498.9
... More
Excavation for Structures
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
Ordinary rock
299.75
-
291.81
... More
Excavation for Structures
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
Hard rock (blasting prohibited)
299.75
-
657.73
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause
305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.
Ordinary Soil
5391.7
-
450.52
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause
305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.
Ordinary rock (not requiring blasting) Upto 3 m depth
5391.7
-
563.21
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
3150.65
-
196
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
1238.15
-
1538.25
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
654.33
-
2123.75
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
238.83
-
7294.7
... More
PCC 1:3:6 in Foundation
(Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)
70
-
6460.97
... More
Providing concrete for plain/ reinforced concrete in open foundations complete as per
drawings and technical specifications Clause 802, 803, 1202 & 1203xx
P.C.C grade M 10
Nominal mix 1:3:6
433.34
-
7283.2
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
271.97
-
7878.5
... More
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from
natural sources).
1265.21
-
410.85
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete
5.33.1 All works upto plinth level
Concrete of M25 grade with minimum cement content of 330 kg /cum
694.56
-
9504.75
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete
5.33.2.1 All works above plinth level upto floor V level
Concrete of M25 grade with minimum cement content of 330 kg /cum
133.37
-
9860.4
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more
65780.89
-
107.85
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :
5.9.1 Foundations, footings, bases of columns, etc. for mass concrete
1060.93
-
392.15
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :
5.9.2 Walls (any thickness) including attached pilasters, butteresses,
plinth and string courses etc.
86.4
-
961.3
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers
364.12
-
736.4
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts
505.08
-
961.3
... More
Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 11.1.2 1:6 (1cement : 6 coarse sand)
247.18
-
965.55
... More
Brick masonry work in cement mortar 1:3 in foundation complete excluding pointing and plastering, as per drawing and technical specifications Cement mortar1:4 (1cement :4 sand)
959.2
-
9376.28
... More
Brick masonry work in cement mortar in substructure complete excepting pointing and
plastering, as per drawing and technical specification Clauses 602, 603, 604, 1202 & 1204
In 1:4 Cement mortar
7.64
-
9136.39
... More
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
686.3
-
6504.9
... More
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:
Cement Mortar 1:6 (1 cement : 6 coarse sand).
227.89
-
6295.15
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand)
11.04
-
9105.95
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :
cement mortar 1:4 (1 cement : 4 coarse sand)
190.08
-
905.05
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.x
6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand)
49.35
-
1123.8
... More
Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :
6.3.2 With Modular bricks
96.14
-
8942.35
... More
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand)
13.33.1 Flush/ Ruled pointing
290.64
-
385.4
... More
CEMENT PLASTER (IN COARSE SAND)
12 mm cement plaster of mix :
1:4 (1 cement: 4 coarse sand)
7293.15
-
357.35
... More
CEMENT PLASTER (IN COARSE SAND)
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
48
-
343.65
... More
20 mm cement plaster of mix
1:4 (1 cement: 4 coarse sand)
3222.1
-
487.4
... More
20 mm cement plaster of mix
1:6 (1 cement: 6 coarse sand)
48
-
466.05
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
313.82
-
537.45
... More
Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.
8mm thick (mirror polished and machine cut edge)
Granite stone of any colour and shade
165.58
-
3094.55
... More
Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.
16.87.1 Area less than 0.50 sqm.
345.58
-
4950.9
... More
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Considering 10% area of Flemed granite flooring (Item no. DSR 2016/8.12.1)
502.87
-
2017.6
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
38.79
-
2354.7
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 11.26.1 25 mm thick
2346.6
-
1948.25
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby
Red or equivalent
1016.38
-
4481.3
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
605.59
-
3186.7
... More
Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:
216.48
-
3891.15
... More
Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random rubble masonry In 1:4 cement mortar
9696.49
-
4940.19
... More
Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203.
Coursed rubble masonry (1st sort) In 1:4 cement mortar
672.82
-
5621.28
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with
Cement mortar 1:6 (1 cement : 6 coarse sand)
380.26
-
7311.25
... More
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.
Cement mortar 1:6 (1 cement : 6 coarse sand)
42.65
-
9275.45
... More
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with :
Cement mortar 1:6 (1 cement : 6 coarse sand)
93.19
-
8812.05
... More
Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level.
7.8.1 Masonry work (first sort), in cement mortar 1:6 (1 cement :
31.68
-
10741.6
... More
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
1653.36
-
235.41
... More
Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : Both face dressed Red sand stone
4.83
-
91295
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
16.91.1 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
1014
-
1045.65
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
5288.92
-
133.7
... More
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
58749.33
-
117.35
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes
122207.65
-
194.4
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
51.84
-
172.6
... More
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.
2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified
119.9
-
1401.35
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
80x0.90 mm M.S. laths with 0.90 mm thick top cover
376.4
-
3191.35
... More
Providing wood work in frames of doors, windows, clerestory windowsand other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
Second class teak wood
6.18
-
142949.7
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
35 mm thick Fixing with hinges of required size and necessary screws
(Note: Hinges and necessary screws hall be paid separately)
59.17
-
3473.85
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
34.85
-
2392.65
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
35 mm thick Fixing with hinges of required size and necessary screws (Note: Hinges and necessary screws hall be paid separately)
75.38
-
3473.85
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for
separately) :
For fixed portion
Powder coated aluminium (minimum thickness of powder coating 50 micron)
1600.12
-
530.9
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
52.64
-
634.45
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
184.24
-
1505.25
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
10.64
-
1139.3
... More
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).
1439.14
-
433.45
... More
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately).
393.78
-
96.9
... More
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.
0.80 mm thick with zinc coating not less than 275 gm/m²
825.18
-
1029.65
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
75 mm diameter
581
-
248.8
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
6909.27
-
185.65
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
48
-
160.6
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.
On steel work
34.65
-
241.75
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
4986.05
-
155.9
... More
Finishing walls with textured exterior paint of required shade :
13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
2635.19
-
223.6
... More
Varnishing with varnish of approved brand and manufacture :
Two or more coats glue sizing with spar varnish or an under coat of flatting varnish
390.13
-
236.9
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including…
Lakeside Restaurant
15
-
5015.05
... More
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :
Serrated with central bulb (225 mm wide, 8-11 mm thick)
116.38
-
327.65
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.
61.45
-
688.9
... More
Supplying & laying of drainage composite for use behind walls, between two different fills, alongside drains of road, below concrete lining of canals etc. Geocomposite for planar drainage, realized by thermobonding a draining core in extruded monofilaments with two filtering nonwoven geotextiles that may also be working as separation or protecting layers. The draining three dimensional core will have a “W” configuration as longitudinal parallel channels. Minimum thickness to be 7.2 mm, with two filtering UV stabilized polypropylene nonwoven geotextile of minimum thickness of 0.75 mm charecteristic opening size (O90) of 110 micron and tensile strength of 8.0 kN/m that will be working as separation or protecting layer, geocomposite having in plane flow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 18 kN/m , with mass per unit area of 740 gsm, supplied in the form of roll for easy transportation to site of work as per detailed specification all complete as per directions of Engineer in charge
1055.4
-
986.95
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
M.S. tube
10628.82
-
196.8
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
783.33
-
772.4
... More
Providing and filling 40mm Downsize Rounded River washed Pebbles loosely placed on an average thickness of 100mm thick layer.including cost of all materials and labour with all lead and lift. complete as per specifications.and as per the direction of the engineer in charge
3.59
-
6210
... More
Brick Wall Cladding, Size :- 9”x3”, Thickness :-18 MM, Color Terra-cota, Material :- Clay
859.08
-
646
... More
PVC FABRIC AWNING
1799
-
150.76
... More
kaushalendra Cast Iron Polish Garden Bench, Capacity 3 Seater
25
-
8400
... More
Water ATM (TATA STEEL Aqua Nest) (AquaNest 250 LPH)
4
-
1019820
... More
Pole Mounted Dustbin
30
-
8625
... More
IP TOILET Single self cleaning Automated IT Enabled Toilets for Male +Female
12
-
1092500
... More
Merry Go Round Four Seater Chair
1
-
11500
... More
Merry Go Round Four Platform
1
-
11500
... More
Garden Swing with seat without roof 2-seater
1
-
14012.75
... More
Slide Ladder (Preschool kit) Ploycarbonate and Multi curve configuration
1
-
17192.5
... More
Swing Craft Blow Moulding Indoor Fun Sea Saw
1
-
28175
... More
Bird Cell
Tensile Membrane Roofing Structure using PVC/ PVDF Coated Membrane
Design, Supply, Fabrication and Installation of Membrane Panels having capacity to block 100%UV Rays(UPF 50+ for all colours)& steel Cables and GI corner fittings nuts and bolts and associated accessories with PVC/ PVDF coated membrane works. Membrane shall be PVC/ PVDF varish coating on both sides with HT Polyester Yarns of 1100 Dtex and Type 0 with minimum Weight of 570 g/m2, minimum Tensile Strength (Warp/ Weft) - 2000/ 2000 N/5cm, minimum Tear Strength (Warp/ Weft) - 200/200 N. Fabric Flame Retadancy Rating to be Euro Class - Bs2, d0, Micro Organism Resistance and Warranty of 10 years. The design complies with the requirements of BS and, EU Standards. The tensioned membrane structure shall include engineering design of structural members and accessory parts. Membrane system shall include PVC/ PVDF coated Membrane Fabric, Wire Ropes and Cables, Shackles, Rigging Screws, Clamps and tensioning hardware as per specification, drawings and engineers approval
30
-
61884.38
... More
Two Pole Structure With Transfomer Mounted on Pole
Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.
2
-
5455
... More
Supplying of 50 mm X 8 mm M.S. flat iron pole top bracket/ cross arm for single 11/22/33 KV over head line conductor complete with fixing clamps, bolts, nuts and washers drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.
4
-
615
... More
Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc and painting with primer and finish paint as required.
4
-
5125
... More
Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.
12
-
312
... More
Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.
6
-
978
... More
Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required.
2
-
2628
... More
Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required. Above 8.0 metre and upto 11.0 metre
4
-
7414
... More
Main LT Panel Incomer
Providing and fixing following rating and breaking capacity MCCB with
thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
630 A 50 KA, FP MCCB
Incomer Rating for the LT Panel
2
-
43092
... More
Main Power Distribution Box
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
4 way (4 + 12), Double door
(LT Panel To Main PDB)-
For Temple, Shop, Production Center DB Connection
5
-
4091
... More
Incomer
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required
63A
5
-
1034
... More
Outgoing
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Triple pole and neutral
20
-
1228
... More
Power Distribution Box
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
4 way (4 + 12), Double door
For- Temple, Shop
(LT Panel To Main PDB, MDB to PDB)
5
-
4091
... More
Incomer-FP MCB
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100A
40A PDB
5
-
970
... More
Outgoing-SP MCB
Supplying and fixing 6A to 32A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
For 1 nos (4 way (4 + 12)) DB - Total Nos of MCB = (12 Nos Outgoing Single Pole MCB)
60
-
256
... More
Distribution Board Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
6 way, Double door
For Each Shops, Cafeteria Area, Temple
(Main PDB to DB)
10
-
2206
... More
Incomer-Isolator, RCCB
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 amps
10
-
435
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 A
10
-
2642
... More
Outgoing-SP MCB
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single Pole
60
-
256
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
135
-
1845
... More
Conduits
Supplying & Fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same of recesses conduit as required.
20mm
3000
-
128
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required
63 mm dia (OD-63 mm & ID-51 mm nominal)
Main Feeder Pillar to Feeder Pillar
200
-
247
... More
Cables
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
1 X1.5 sq. mm
2500
-
45
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
2 x 1.5 sq. mm
1000
-
70
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
2 x 2.5 sq. m
2500
-
98
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
50
-
428
... More
SwitchBoard
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
4 Module (125mmX75mm)
70
-
547
... More
Switch/Socket
Supplying & Fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plates etc. as required
5/6 Amps Switch
210
-
103
... More
Supplying & Fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plates etc. as required
15/16 Amps switch
10
-
156
... More
Supplying & Fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plates etc. as required
Supplying and fixing 32A power single phase Industrial socket for Car charging complete with connections, testing and commissioning etc. as required.
6
-
3224
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
1 Nos for Each Shops,
70
-
40
... More
Socket
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).
95
-
358
... More
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.
1Nos 6A and 1Nos 16 A Socket for Each Shops
91
-
488
... More
Erection of Pole
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
Above 4.5 metre and upto 6.5 metre
6
-
5121
... More
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
Above 6.5 metre and upto 8.0 metre
230
-
6066
... More
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
Above 8.0 metre and upto 11.0 metre
4
-
7077
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Details of cost for one Set
For 2 Pole Structure, Feeder Pillar
26
-
7472
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
130
-
144
... More
Lighting Conductor
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
2
-
518
... More
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
2
-
113
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
10
-
126
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
10
-
197
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
2
-
121
... More
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
2 Pole Structure With Transfomer Mounted
Two Pole Structure
10
-
195
... More
Supply of 9 mtrs Pole
11 kV Drop Out Fuse
4
-
15750
... More
Supply of 11 KV DOF Set of three nos i/c necessary connection complete as per Technical specification-Drop Out Fuse type SMD Fuse
Transformer
2
-
3990
... More
Supply of 100 KVA, 11/0.433 kV 3 Phase , Oil Cooled Copper Wound Outdoor Transformer
LT Panel
2
-
210143.42
... More
Supplying of 415 V LT Panel of 16 SWG CRCA Sheet with 7 tank process, power coated, RAL 7032 Incomer- 4P 50kA MCCB , Outgoing-63A 4P 10kA MCCB , 200A 4P 25kA MCCB , 160A 4P 25kA MCCB
2
-
338415
... More
Main Feeder Panel
Design, manufacture, supply, inspection, handling, assembling, affecting proper connections, testing and commissioning of 14 SWG CRCA sheet steel fabricated cubical outdoor type Main Feeder Panel , floor mounting, dust & vermin proof, front operated construction, double door enclosure class - IP 65, powder coated after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 600 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 . The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable as required.
Feeder pillar panel 125A water proof, double door with rain canopy and 300 mm height panel stand
Incomer:- 125A 4P MCCB - 1 no.
BUS BAR : 3 phase 50 HZ TPN high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp.
OUT GOINGS : 63 AMP FP MCCB (25 KA)
4
-
525000
... More
Design, manufacture, supply, inspection, handling, assembling, affecting proper connections, testing and commissioning of 14 SWG CRCA sheet steel fabricated cubical outdoor type Main Feeder Panel , floor mounting, dust & vermin proof, front operated construction, double door enclosure class - IP 65, powder coated after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 600 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 . The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable as required.Installation (20%)
4
-
52500
... More
Sub Feeder Panel - Street Lighting
Design, manufacture, supply, inspection, handling, assembling, affecting proper connections, testing and commissioning of 14 SWG CRCA sheet steel fabricated cubical outdoor type Feeder Panel , floor mounting, dust & vermin proof, front operated construction, double door enclosure class - IP 65, powder coated after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 600 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 . The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable as required.Design, manufacture, supply, inspection, handling, assembling, affecting proper connections, testing and commissioning of 14 SWG CRCA sheet steel fabricated cubical outdoor type Feeder Panel , floor mounting, dust & vermin proof, front operated construction, double door enclosure class - IP 65, powder coated after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 600 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 . The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable as required.
63 AMP TPN MCB-12 KW Load
Digital 24 hour-Astronomical Timer
16
-
50703.45
... More
Design, manufacture, supply, inspection, handling, assembling, affecting proper connections, testing and commissioning of 14 SWG CRCA sheet steel fabricated cubical outdoor type Feeder Panel , floor mounting, dust & vermin proof, front operated construction, double door enclosure class - IP 65, powder coated after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 600 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 . The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable as required.
63 AMP TPN MCB-12 KW Load
Digital 24 hour-Astronomical TimerInstallation (20%)
16
-
10140.69
... More
Supply Installation, testing and commissioning of IP65/IK09, 30 Watt White LED type Solar Street Light (LED based) consist of white LED luminaire ( LED + Driver) and including battery , necessary control electronics, interconnecting wires / cables, module mounting structures, according to standard EN 60529 and EN 62262 ,complience with standard IEC 68-2-6 ,intelligent LED Street Luminaire should be made of Heavy-duty die-cast aluminum (EN AC-46100) and for extremely corrosive environments, surface treatment should be Anti-UV thermosetting polyester / 80 micron epoxy primer + Anti-UV thermosetting polyester.Available in all TYPEll(T201) TYPElll(T301) TYPElV(T401) V(T501) distrubution type ,30W Min efficacy to 154 lm/W,delivered lumens min 22100lm for streetlight application with Dimmable driver and integrated SLC , including connection with 3x1.5 sqmm flexible fire retardant copper connecting wire of required length complete as required for outdoor application.Luminaire and built in idriver must meet follow paramenters:
-DriverEficiency:86%~93%;Maximum Current:AC0.22A(max)~AC2.5A(max)
-High eficiency driver:PF0.98,driver eficiency92%.
215
-
26250
... More
Supply of Hot-Dip Galvanized conical 7m height Tubular Poles for Street Lighting with decorative brackets, IS 2062 for base plate with door opening arrangements, including suitable boards, bakelite sheet suitable to withstand the wind speed of 47 m/sec.
230
-
20989.5
... More
EV Charger, Supply , Installation, Testing & comissioning of the following EV Chargers
3.3 kW simple EV outlet
3
-
3780
... More
7.4 kW Type -2 Charger
3
-
68040
... More
Supplying following sizes of PVC insulated aluminium conductor, Four core cable in the existing cablr tray. Grade 650/1100 V as per IS 7098 with upto date amendements
EV Charger, Supply , Installation, Testing & comissioning of the following EV Chargers
3.3 kW simple EV outlet
200
-
1485.75
... More
Bollard Light
Supply of approved make of LED integral type bollard cylindrical/square shape housing cast aluminium dome shape top cover fixed with cylindrical shape acrylic cover having base plate with holes for direct mounting complete with all accessories including preparation of foundation, fixing, connection etc. as required. LED of 1 to 3 Watt each assembled on single MCPCB, system lumens output with efficacy90 lm/W. luminaire having color temp upto 6500K & 50000 burning hrs. life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare, comprises of driver PF 0.95 & surge protection 10KV. IP65 protection
255
-
5775
... More
Installation(20%)
255
-
1155
... More
Uplighter Light Supply and fixing of ground mounted 3000K-5500K, 10deg-15deg as required 1m long linear LED spike extrusion fixture with VISOR & Honeycomb Louver with & IK rating 06, IP 65 cable gland, SS Clamps, screws as required with swivel mounting.
10
-
1706.25
... More
Installation(20%)
10
-
341.25
... More
Step Light
Supplying of approved make flexible 9W LED Step Light for wall mounting complete with all accessories including connection lead, fixing, connection as required. Submission LM 79-08/IS16106 , IEC60598, IEC61347i/c connection wire, testing etc.
24
-
4200
... More
Aviation Light
Supply, Installation testing and commissioning of red colour aviation light LED integral type comprising of aluminium powder coated housing with polycarbonate enclosure IP 65 on existing pipe/support including connection, testing etc. as required. Guarantee as per tender agreement condition.
2
-
3146.85
... More
Flood Loght
Supply of LED type Flood light 80 W fixtures with required. lamps, control gears,
including. connection with 3x1.5 sq.mm flexible fire-retardant copper connecting wire of required length. complete as required for outdoor application.
6
-
11550
... More
Supplying AC Exhaust Fan 300mm (12") Sweep (Light Duty) suitable to operate on 230V 50Hz, AC Supply.
29
-
1417.5
... More
Batten Light and Downlight
Supply of LED type wall light 20 W fixures system efficiency 120 lm/w with required lamps, control gears, including connection with 3x1.5 sqmm flexible fire retardant copper connecting wire of required length complete as required.
48
-
134.39
... More
Supply of LED type surface/recessed light/Downlight 12 W fixures system efficiency
120 lm/w with required lamps, control gears, including connection with 3x1.5 sqmm flexible fire retardant copper connecting wire of required length complete as required for indoor application.
20
-
481.95
... More
Supply of LED type surface/recessed light/Downlight 9 W fixures system efficiency
120 lm/w with required lamps, control gears, including connection with 3x1.5 sqmm flexible fire retardant copper connecting wire of required length complete as required for indoor application.
32
-
441.79
... More
Supplying and Installation of 10 kWp Solar Module & Mounting Structure, Solar PCU (PWM)/Solar PCU (MPPT) including Tubular Batteries, Array Junction Box/ D.C Distribution Box, Earthing Kit along with accessories, Lightning Arrestor and as per MNRE Specifications
9000
-
88.2
... More
Supplying following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
4C x 10 Sq mm
2500
-
326.55
... More
4C x 16 Sq mm
2500
-
390.6
... More
Supplying following sizes of PVC insulated aluminium conductor, Three and Half core cable in the existing cablr tray. Grade 650/1100 V as per IS 7098 with upto date amendements.
4C x 120 Sq.mm
40
-
1485.75
... More
Charges Paid to Electricity Department for obtaining Electrical connection
1
-
25000
... More
Excavating trenches by Mechanical/manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
All kinds of soil
Pipes, cables etc, not exceeding 80 mm dia.
1000
-
215.6
... More
Excavating trenches by Mechanical/manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
All kinds of soil
Pipes, cables etc, not exceeding 80 mm dia.
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
1600
-
352.15
... More
Excavating trenches by Mechanical/manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
All kinds of soil
Pipes, cables etc, not exceeding 80 mm dia.
Pipes, cables etc. exceeding 300 mm dia. but not exceeding 600 mm dia
200
-
549.75
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
20
-
298.25
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 150mm diameter and weighing not less than 440 grams.
20
-
54.7
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
100x100 mm size P type
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
25
-
2707.65
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
150 mm dia. R.C.C. pipe
600
-
556.45
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
250 mm dia. R.C.C. pipe
450
-
899.8
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
300 mm dia. R.C.C. pipe
250
-
994.3
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
450 mm dia. R.C.C. pipe
100
-
1620.95
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand). RCC top slab in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
Inside size 90cm X 80cm and 45cm deep including C.I. Cover with frame(light duty) 455X610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15kg) With common burnt clay F.P.S (non modular) bricks of class designation 7.5
65
-
12770.55
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand). RCC top slab in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
Inside size 120X90cm and 90cm deep including C.I. cover with frame(heavy duty) 500mm internal diameter total weight of cover and frame to be not less than 116 kg (weight to cover 58 kg and weight of frame 58 kg)
With common burnt clay F.P.S (non modular) bricks of class designation 7.5
30
-
26405.5
... More
Extra for depth for manholes
Size 90 X 80 cm
With common burnt clay F.P.S (non modular) bricks of class designation 7.5
65
-
8825.4
... More
Extra for depth for manholes
Size 120 X 90 cm
With common burnt clay F.P.S (non modular) bricks of class designation 7.5
30
-
10585.5
... More
Making soakpit 2.5m Diameter 3.0 meter deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drainpipe of 100 mm diameter and 1.8 m long complete as per the standard design.
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
26861.9
... More
Making soakpit 1.20 x 1.20 x 1.20 filled with brick brats including S.W. drainpipe of 100 mm diameter and 1.20 m long complete as per the standard design.
5
-
2890.1
... More
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
450 mm dia RCC pipes
50
-
2676.55
... More
Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
450 mm dia RCC pipes.
50
-
3053.55
... More
Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
600 mm dia RCC pipes.
20
-
3934.75
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
15 mm nominal dia Pipes
60
-
286.8
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
20 mm nominal dia Pipes
50
-
335
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
25 mm nominal dia Pipes
55
-
401.55
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
32 mm nominal dia Pipes
30
-
518.75
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
40 mm nominal dia Pipes
20
-
702.95
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
50 mm nominal dia Pipes
10
-
934.15
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directionof Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.
15 mm nominal dia Pipes
70
-
497.8
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directionof Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.
20 mm nominal dia Pipes
60
-
537.6
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directionof Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.
25 mm nominal dia Pipes
55
-
627.25
... More
Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc. External Work
15 mm dia nominal bore
100
-
322.15
... More
Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc. External Work
20 mm dia nominal bore
500
-
368.6
... More
Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc. External Work
25 mm dia nominal bore
150
-
467.75
... More
Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc. External Work
32 mm dia nominal bore
100
-
540.3
... More
Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc. External Work
40 mm dia nominal bore
100
-
617.05
... More
Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc. External Work
50 mm dia nominal bore
150
-
762.15
... More
Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc. External Work
65 mm dia nominal bore
150
-
896.6
... More
Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc. External Work
80 mm dia nominal bore
200
-
1041.7
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
25 to 40 mm nominal bore
1
-
911.9
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
50 to 80 mm nominal bore
1
-
1785.35
... More
Fixing water meter and stop cock in G.I. pipe line including cutting
and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).
20
-
812.3
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
20 mm nominal bore
20
-
539.95
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
25 mm nominal bore
1
-
622.4
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
32 mm nominal bore
1
-
689.6
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
40 mm nominal bore
1
-
826.1
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
50 mm nominal bore
1
-
1026.65
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
65 mm nominal bore
1
-
1742.15
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
80 mm nominal bore
1
-
2604.55
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
15 mm nominal bore
10
-
406.85
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
20 mm nominal bore
51
-
462.5
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
25 mm nominal bore
11
-
464.05
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) :
25 mm nominal bore Horizontal
10
-
591.4
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) :
32 mm nominal bore Horizontal
1
-
791.9
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) :
80 mm nominal bore Horizontal
2
-
3664.75
... More
Providing and fixing brass ferrule with C.I. mouth cover including
boring and tapping the main :
25 mm nominal bore
1
-
486.8
... More
Providing and fixing uplasticised PVC connection pipe with brass
unions :
30 cm Length
15 mm nominal bore
56
-
85
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
100 mm diameter
7
-
193.95
... More
Constructing masonry Chamber 60x45x50 cm inside, in brick work
in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter
complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of
class designation 7.5
1
-
9698.55
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
20000
-
11
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931
15 mm nominal bore
5
-
506.8
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
15 mm nominal bore
15
-
798.95
... More
Providing and fixing C.P. brass stop cock (concealed) of standard
design and of approved make conforming to IS:8931.
15 mm nominal bore
20
-
670.45
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15 mm nominal bore
61
-
574.3
... More
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) :
80 mm nominal bore
1
-
3627.65
... More
Providing, installation, testing and commissioning of stainless steel Y-Strainer fabricated out of 1.6 mm thick stainless steel, Grade - 304, sheet with 3 mm dia holes with stainless steel flange.
80 mm dia
1
-
4710
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal sheet duly ISI marked complete with nuts, bolts, washer, gasket conforming to IS 13095 of following sizes as required.
80 mm dia
1
-
4982
... More
Providing, installation, testing and commissioning of Centrifugal
Monoblock pump set conforming to IS 9079 , 2 pole motor operating
at synchronised speed of 3000 RPM with requisite MOC impeller,
priming funnel, cock, suitable flanges at suction and delivery side.
Pump shall have common shaft for pump and motor. Motor shall be
suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply.
Motor shall be TEFC type and Pump set shall be suitable for working
at various discharge and head requirements as per scope of work.
Pump shall be erected on C.C. foundation / cross channels / RSJ
frame block with suitable foundation bolts grouted in C.C. foundation
block etc. complete in all respect as per specification, scope of work
and direction of Engineer in Charge of following power rating,
suitable for prescribed duty conditions mentioned in TD.
Centrifugal Monoblock Pump set (Single Stage)
3.7 KW (5.0 HP)
2
-
28750
... More
Supply and Installation of 250 lph RO Plant with storage. Specification - RO capacity - 250 lph, Storage capacity - 1000 Litre
2
-
86250
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
18
-
6515.55
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
One urinal basin with 5 litre white P.V.C. automatic flushing
cistern
5
-
6258.75
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
22
-
2648.85
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP
Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-
White Vitreous China Wash basin size 550x400 mm with a
15 mm CP Brass single hole basin mixer
1
-
3960.55
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as
per IS:13983 with C.I. brackets and stainless steel plug 40 mm,
including painting of fittings and brackets, cutting and making good the walls wherever required :
Kitchen sink with drain board
510x1040 mm bowl depth 250 mm
14
-
6945.6
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto
1 metre long with S.S. triangular plate to Eureopean type W.C. of
quality and make as approved by Engineer - in - charge.
18
-
349.15
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved
quality & make and as per the direction of Engineer-in-charge.
27
-
1034.8
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Flexible pipe
32 mm dia
14
-
119.55
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
47
-
53.25
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm
22
-
2093
... More
Providing and fixing toilet paper holder :
C.P. brass
18
-
803.7
... More
Providing and fixing soil, waste & vent pipes 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
250
-
1180.75
... More
75 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
50
-
1186
... More
Providing and fixing M.S. holder-bat clamps of approved design to
Sand Cast iron/cast iron (spun) pipe embedded in and including
cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size),
including cost of cutting holes and making good the walls etc. :
For 100 mm dia pipe
30
-
362.85
... More
For 75 mm dia pipe
20
-
360
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
For 100 mm dia
5
-
705.2
... More
For 75 mm dia Sand cast iron S&S as per IS - 3989
5
-
522.8
... More
Providing and fixing bend of required degree .
For 100mm dia
Sand cast iron S&S as per IS - 3989
100
-
570.05
... More
Providing and fixing bend of required degree .
For 75mm dia
Sand cast iron S&S as per IS - 3989
30
-
390.5
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS - 3989
37
-
1996.5
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
100 mm inlet and 75 mm outlet
Sand cast iron S&S as per IS - 3989
10
-
1975.15
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125
mm high and 112 mm distance from wall of standard shape with
bracket of the same materials with snap fittings of approved quality
and colour, weighing not less than 105 gms.
10
-
168.35
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
10
-
231.95
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour.
450 mm long towel rail with total length of 495 mm,
78 mm wide and effective height of 88 mm, weighing not
less than 170 gms
7
-
673.4
... More
Supply and Installation of Electric geyser of capacity of 25 Liter storage tank and with 5 star rating of electrical consumption.
8
-
15007.5
... More
Supply of Bio-digestor tank of 2000 litre capacity with bacteria, material - Fibre reinforced plastic (FRP) with inliet and outlet pipe and gas pipe- Size of rectangular tank - 1460 mm (length) x 1360 mm (width) x 1000 mm (Height). Wall thickness of tank - 5 mm, Top and bottom thickness - 7 mm. Outlet water parameters shall be in accordance with the waster water norms.
10
-
67432.04
... More
Supply and installation of Water ATMs with 3 number of dispensing points, purification capacity of 250 LPH, inbuilt RO, Raw water Storage of 1000 Liter HDPE tank , and Treated water storage capacity of 225 Liter
4
-
1019820
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). (Calculation = Total green area from "Horticulture calculation back up sheet" x 0.6)
23826.22
-
78.1
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). (Calculation = Total added value of good earth for shrubs, grasses, trees & palms from "Horticulture calculation back up sheet")
4115.98
-
515.6
... More
Screened through sieve of I.S. designation 20 mm
(Calculation = Total added value of manure for shrubs, grasses, trees & palms from "Horticulture calculation back up sheet")
3074.91
-
254.15
... More
Rough dressing the trenched ground including breaking clods.
(Calculation = Total green area from "Horticulture calculation back up sheet")
39710.36
-
1.5
... More
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. (Calculation = Total green area from "Horticulture calculation back up sheet")
39710.36
-
4.9
... More
Fine dressing of the ground.
(Calculation = Total green area from "Horticulture calculation back up sheet")
39710.36
-
3.7
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
(Calculation = value of Row 2 & 3(i) added)
7190.89
-
52.35
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
(Calculation = value of Row 2 & 3(i) added)
7190.89
-
36.55
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) (Calculation =Total no. of ground covers from "Horticulture calculation back up sheet")
2492.4
-
222.85
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads nd lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)
Holes 90 cm dia, and 90 cm deep (Calculation =Total no. of trees and palms from "Horticulture calculation back up sheet")
1192.98
-
143.1
... More
Holes 60 cm dia, and 60 cm deep
(Calculation =Total no. of shrubs & climbers from "Horticulture calculation back up sheet")
23751.68
-
43.75
... More
Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded).
(Calculation = Total green area from "Horticulture calculation back up sheet" x 0.3)
11913.11
-
18.25
... More
Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. (Calculation = Total volumn of mounds from "Horticulture calculation back up sheet")
3779.02
-
456.35
... More
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
(Calculation =25% of Total grass area from "Horticulture calculation back up sheet")
6924.23
-
214.4
... More
Providing & laying Selection no. 1 doob grass turf with earth 50mm to
60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge.
(Calculation =75% of Total grass area from "Horticulture calculation back up sheet")
20772.7
-
87.5
... More
Providing and stacking of Albizzia lebbek of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. (Total no. of T1 from "Horticulture calculation back up sheet")
22
-
65
... More
Providing and stacking of Alstonia scholaris of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge.
(Total no. of T2 from "Horticulture calculation back up sheet")
67
-
65
... More
Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
(Total no. of T3 from "Horticulture calculation back up sheet")
10
-
65
... More
Providing and stacking of Cedrus deodara of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T4 from "Horticulture calculation back up sheet")
5
-
49.38
... More
Providing and stacking of Prunus communis (Aloo bukhara) of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T5 from "Horticulture calculation back up sheet")
15
-
49.38
... More
Providing and stacking of Ficus roxburghii of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T6 from "Horticulture calculation back up sheet")
13
-
49.38
... More
Providing and stacking of Ficus palmata (Anjeer) of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T7 from "Horticulture calculation back up sheet")
10
-
49.38
... More
Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge. (Total no. of T8 from "Horticulture calculation back up sheet")
12
-
180
... More
Providing and stacking of Ficus bengalensis (Bargad) of height 120-135
cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
(Total no. of T9 from "Horticulture calculation back up sheet")
5
-
65
... More
Providing and stacking of Melia azedarach of height 120-135 cm. in big
poly bag of size 25 cm as per direction of the officer-in-charge. (Total no. of T10 from "Horticulture calculation back up sheet")
17
-
45
... More
Providing and stacking of Myrica esculenta (Kaphal) of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T11 from "Horticulture calculation back up sheet")
10
-
49.38
... More
Providing and stacking of Pinus roxburghii (Chir) of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T12 from "Horticulture calculation back up sheet")
26
-
49.38
... More
Providing and stacking of Putranjiva roxburghii of height 90-105 cm. in big polybag of size 25 cm as per direction of the officer-in-charge. (Total no. of T13 from "Horticulture calculation back up sheet")
23
-
45
... More
Providing and stacking of Salix alba of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T14 from "Horticulture calculation back up sheet")
16
-
49.38
... More
Providing and stacking of Salix tetrasperma of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T15 from "Horticulture calculation back up sheet")
14
-
49.38
... More
Providing and stacking of Toona ciliata of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T16 from "Horticulture calculation back up sheet")
14
-
49.38
... More
Providing and stacking of Butea frondosa (Flame of Forest) of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
(Total no. of T17 from "Horticulture calculation back up sheet")
9
-
55
... More
Providing and stacking of Bauhinia blakeana (Kachnar) of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
(Total no. of T18 from "Horticulture calculation back up sheet")
13
-
80
... More
Providing and stacking of Bombax ceiba of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. (Total no. of T19 from "Horticulture calculation back up sheet")
21
-
70
... More
Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. (Total no. of T20 from "Horticulture calculation back up sheet")
14
-
65
... More
Providing and stacking of Sterculia villosa (Udala) of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T21 from "Horticulture calculation back up sheet")
38
-
49.38
... More
Providing and stacking of Bauhinia retusa (Kanol) of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T22 from "Horticulture calculation back up sheet")
18
-
49.38
... More
Providing and stacking of Mimusops elengi (Maulsri) of height 180-195
cm., well developed with thick stem in big in big size HDPE bag as per
direction of the officer-in-charge. (Total no. of T23 from "Horticulture calculation back up sheet")
24
-
125
... More
Providing and stacking of Lagerstemia indica (Gulbahar) of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T24 from "Horticulture calculation back up sheet")
19
-
49.38
... More
Providing and stacking of Rhododendron campanulatum (Chimula / Sakeran) of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T25 from "Horticulture calculation back up sheet")
24
-
49.38
... More
Providing and stacking of Pterospermum acerifolium (Kanak Champa) of
height 150-165 cm. in big poly bags of size 25 cm as per direction of the
officer-in-charge.
(Total no. of T26 from "Horticulture calculation back up sheet")
43
-
65
... More
Providing and stacking of Rhododendron arboreum (Burans) of height 120-150cm.
(Total no. of T27 from "Horticulture calculation back up sheet")
12
-
49.38
... More
Providing and stacking of Saraca indica (Sita Ashok) of height 105-120 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
(Total no. of T28 from "Horticulture calculation back up sheet")
15
-
80
... More
Providing and stacking of Salix wallichiana (Gadhbes) of height 120-150cm as per direction of the officer-in-charge.
(Total no. of T29 from "Horticulture calculation back up sheet")
5
-
49.38
... More
Providing and stacking of Aegle marmelos (Bel) of height 120-150cm. (Total no. of T30 from "Horticulture calculation back up sheet")
9
-
49.38
... More
Providing and stacking of Citrus aurantium (Narangi) of height 120-150cm
(Total no. of T31 from "Horticulture calculation back up sheet")
12
-
49.38
... More
Providing and stacking of Cinnamomum tamla (tejpatta) of height 120-150cm (Total no. of T32 from "Horticulture calculation back up sheet")
34
-
49.38
... More
Providing and stacking of Corylus jacquemontii (Bhotiya badaam, Kapaasi) of height 120-150cm (Total no. of T33 from "Horticulture calculation back up sheet")
16
-
49.38
... More
Providing and stacking of Heynea trijuga (Banreetha) of height 120-150cm (Total no. of T34 from "Horticulture calculation back up sheet")
7
-
49.38
... More
Providing and stacking of Phyllanthus emblica (Amla) of height 150-165
cm. in Big HDPE Bag as per direction of the officer-in-charge.
(Total no. of T35 from "Horticulture calculation back up sheet")
6
-
90
... More
Providing and Stacking of Anjeer of height 75-90 cm. in poly bags of size 25 cm as perdirection of the officer-in-charge. (Total no. of T36 from "Horticulture calculation back up sheet")
9
-
150
... More
Providing and stacking of Lagerstroemia flosreginae (Jarul) of height 150-165 cm.in big poly bag of size 25 cm as per direction of the officer-in-charge.
(Total no. of T37 from "Horticulture calculation back up sheet")
34
-
120
... More
Providing and stacking of Madhuca latifolia of height 120-150cm
(Total no. of T38 from "Horticulture calculation back up sheet")
9
-
49.38
... More
Providing and stacking of Morus alba (Toot) of height 120-150cm.
(Total no. of T39 from "Horticulture calculation back up sheet")
12
-
49.38
... More
Providing and stacking of Eugenia jambolana / Syzigium cumini (Jamun) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
(Total no. of T40 from "Horticulture calculation back up sheet")
14
-
75
... More
Providing and Displaying Travelers palm well developed with fresh & healthy foliage 120 to 150 cm ht. in 35 cm Cement Pot as per direction of the officer-in-charge. (Total no. of P01 from "Horticulture calculation back up sheet")
7
-
484.85
... More
Providing and stacking of Washingtonia filifera palm stem ht. 90-105 cm with 6-7 healthy leaves lush green leaves well developed in big size HDPE Bags as per direction of the officer-in-charge.
(Total no. of P02 from "Horticulture calculation back up sheet")
19
-
400
... More
Providing and stacking of Foxtail palm of ht. 120-150 cm bottom girth 15- 20 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge. (Total no. of P03 from "Horticulture calculation back up sheet")
16
-
230
... More
Providing and stacking of Fishtail palm of ht. 150-180 cm bottom girth 15- 20 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge. (Total no. of P04 from "Horticulture calculation back up sheet")
11
-
200
... More
Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from
bottom to top in 25 cm size Earthen pot/Plastic pot & as per direction of
the officer-in-charge.
(Total no. of P05 from "Horticulture calculation back up sheet")
443.98
-
322.9
... More
Providing and Displaying Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge. (Total no. of S1 from "Horticulture calculation back up sheet")
1086
-
461.25
... More
Providing and stacking of Cassia biflora of height 90-105 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge. (Total no. of S2 from "Horticulture calculation back up sheet")
2852
-
100
... More
Providing and stacking of plant Canna dwarf of height 25 to 30 cm., 2 to 3
suckers in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per
direction of the officer-in-charge.
(Total no. of S3 from "Horticulture calculation back up sheet")
992
-
35.9
... More
Providing and stacking of Carrisa carandus (Karaunda) of height 45-60cm (Total no. of S4 from "Horticulture calculation back up sheet")
1354
-
33.04
... More
Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60-
75 cm. with 4-5 branches in bag of size 25 cm as per direction of the
officer-in-charge.
(Total no. of S5 from "Horticulture calculation back up sheet")
1941
-
40
... More
Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
(Total no. of S6 from "Horticulture calculation back up sheet")
964
-
20
... More
Providing and stacking of Ficus palmata (Bedu) of height 45-60cm (Total no. of S7 from "Horticulture calculation back up sheet")
165
-
33.04
... More
Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty
shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic
Pot & as per direction of the officer-in-charge.
(Total no. of S8 from "Horticulture calculation back up sheet")
1095
-
20
... More
Providing and stacking of Hamelia patens of height 90-105 cm. bushy in
big size HDPE bags as per direction of the officer-in-charge. (Total no. of S9 from "Horticulture calculation back up sheet")
191
-
100
... More
Providing and stacking of Hymenocallis littoralis (Spider lily) of height 45-60cm
(Total no. of S10 from "Horticulture calculation back up sheet")
1959
-
33.04
... More
Providing and stacking of Hibiscus variegated of height 60-75 cm. with
healthy variegated foliage in earthen pots size 25 cm as per direction of the officer-in-charge. (Total no. of S11 from "Horticulture calculation back up sheet")
1694
-
55
... More
Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge. (Total no. of S12 from "Horticulture calculation back up sheet")
1938
-
15
... More
Providing and stacking of Nerium oleander (kaner) of height 60-75 cm. with 5-6 branches in poly bags of size 25 cm as per direction of the
officer-in-charge.
(Total no. of S13 from "Horticulture calculation back up sheet")
336
-
40
... More
Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge.
(Total no. of S14 from "Horticulture calculation back up sheet")
556
-
32.8
... More
Providing and stacking of Tecoma gaudichaudi of height 90-105 cm.,bushy in big size HDPE bag as per direction of the officer-in-charge.
(Total no. of S15 from "Horticulture calculation back up sheet")
482
-
110
... More
Providing and stacking of Aloe vera plant.
(Total no. of S16 from "Horticulture calculation back up sheet")
1131
-
33.04
... More
Providing and stacking of Ocimum basilicum (Tulsi Shyama) plant.
(Total no. of S17 from "Horticulture calculation back up sheet")
464
-
33.04
... More
Providing and stacking of Ocimum basilicum (Tulsi Rama) plant.
(Total no. of S18 from "Horticulture calculation back up sheet")
449
-
33.04
... More
Providing and stacking of Murraya Koenigii spreng (Kadipatta/meetha neem) of ht 45-60 cm well developed in earthen pots of size 20 cm. per direction of the officer-in-charge. (Total no. of S19 from "Horticulture calculation back up sheet")
744
-
25
... More
Providing and stacking of Mentha arvensis (Pudina) plant.
(Total no. of S20 from "Horticulture calculation back up sheet")
1679
-
33.04
... More
Providing and stacking of Tagetes erecta (Gaenda) plant.
(Total no. of S21 from "Horticulture calculation back up sheet")
1167
-
33.04
... More
Providing and stacking of Allamanda violacea of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge.
(Total no. of C1 from "Horticulture calculation back up sheet")
96
-
45
... More
Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. (Total no. of C2 from "Horticulture calculation back up sheet")
88
-
40
... More
Providing and stacking of Ipomoea purpurea (Morning glory) of height30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. (Total no. of C3 from "Horticulture calculation back up sheet")
97
-
35
... More
Providing and stacking of Quisqualis indicia of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. (Total no. of C4 from "Horticulture calculation back up sheet")
115
-
25
... More
Providing and stacking of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. (Total no. of C5 from "Horticulture calculation back up sheet")
108
-
25
... More
Providing and stacking of Alternanthera species (red) of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. (Total no. of G1 from "Horticulture calculation back up sheet")
4347
-
20
... More
Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of
Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
(Total no. of G2 from "Horticulture calculation back up sheet")
3537
-
121
... More
Providing and stacking of Daniella variegated, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
(Total no. of G3 from "Horticulture calculation back up sheet")
3871
-
30
... More
Providing and stacking of Iresine herbstii, of height 25-30 cm., full of branches well developed in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. (Total no. of G4 from "Horticulture calculation back up sheet")
6991
-
20
... More
Providing and stacking of Ophiopogon jaburan (variegated), full of variegated leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. (Total no. of G5 from "Horticulture calculation back up sheet")
6776
-
20
... More
Providing and stacking of Ophiopogon, Green/Black full of leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. (Total no. of G6 from "Horticulture calculation back up sheet")
6955
-
20
... More
Providing and stacking of Syngonium (Butterfly) variegated with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.
(Total no. of G7 from "Horticulture calculation back up sheet")
3549
-
30
... More
Providing and stacking of Tradescantia, full of leaves in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge.
(Total no. of G8 from "Horticulture calculation back up sheet")
5693
-
21
... More
Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge.
(Total no. of G9 from "Horticulture calculation back up sheet")
7753
-
15
... More
Terrace Pump
(A) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required:-
(B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520. (C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(D) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
(E) Suitable cement concrete foundation duly plastered and with anti-vibration pads.
450 LPM at 35 Meter Head
2
-
86203
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
100 mm dia
20
-
2555
... More
80 mm dia
3
-
1885
... More
50 mm dia
3
-
1281
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
100 mm dia
4
-
6667
... More
80 mm dia
2
-
4982
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
100 mm dia
2
-
11050
... More
Providing and fixing of dial type (150 mm) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI with no Syphon. Cost shall be inclusive of providing any short pieces, nipples, elbows etc. as required.
4
-
1500
... More
Supplying and Fixing of Fire Man's axe with heavy insulated rubber as per standard conforming to IS 926.
2
-
786
... More
Providing & fixing single acting Air release valve with brass gate valve, flanges/ union, suitable for wet riser system with all necessary connections complete with all accessories as required and conforming to IS : 12992 (Part 1).
2
-
1474
... More
100 mm dia. Stainless Steel fire brigade draw out collecting head with 63 mm diameter instantaneous male draw out arranged at a suitable point at street level. This draw out shall be connected to galvanized iron pipe of 100 mm diameter with foot valve arrangement in the tank for Fire Brigade.
2
-
14674
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
Single headed Stainless steel
2
-
6139
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
Stainless Steel (Grade 304)
4
-
4448
... More
Supplying & fixing 63 mm dia short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
Stainless Steel (Grade 304)
2
-
1662
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.
a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
b) 20 mm nominal internal dia gun metal globe valve & nozzle.
c) Drum and brackets for fixing the equipmets on wall.
d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 Meter length
2
-
8675
... More
Supplying, installation, testing and commissioning of weather proof M.S door and glass fire door size 2100 mm x 900mm fabricated from 1.6mm thick M.S. sheets and M.S angle 40mm x 40mmx6mm complete with glass, locking arrangements to accommodate the following: -
a) single headed Hydrant valve - 1 No.
b) Fire Hoses 63mm, 15 M long with accessories - 2 Nos.
c) Short branch - 1 No.
d) First Aid hose Reel - 1 No.
e) Fire Extinguisher - 2 Nos.
f) Fireman's Axe - 1 No.
g) Pressure Gauge - 1 No.
The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade.
2
-
16847
... More
Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.) including cutting to size, drilling, welding, including cost of fasteners, clamps in RCC structural members as directed, including two or more coats of synthetic paint over one coat of primer after surface preparation including cutting and making good walls (Structural other than pipe support).
100
-
144
... More
Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 and amended upto date finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge with CO2 gas conforming to IS : 307-1996..
Capacity 4.5 kg. I.S.I. Marked. (IS : 15683 : 2006 and amended upto date)
2
-
5419
... More
Providing and fixing ABC stored pressure dry chemical powder Fire Extinguisher IS : 15683 and amended upto date latest revision manufacturer and of CRCA sheet in welded construction, finish with High quality epoxy polyester powder coated complete with brass forged ball valve, gun metal cap and nozzle, including initial filled and wall suspension bracket (suitable for fighting in class 'A', B & 'C' that is wood, textile, flammable liquid, electric and gases).Capacity 6 Kg (IS : 15683 : 2006 and amended upto date)
3
-
2399
... More
Providing and fixing water Co2 (ISI marked) extinguishers including all accessories as per IS specification. (IS : 15683 and amended upto date) with wall bracket with rawl plug. Capacity 9 litres (IS : 15683 : 2006 and amended upto date)
5
-
3500
... More
Supplying and installing at approved location approved make fire buckets at 24 gauge galvanized steel sheet, standard 9 litres capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letter "FIRE" in black and gold. Cost shall be inclusive of Providing MS stand duly painted over a coat of primer (one stand shall be suitable for hanging 5 buckets.
2
-
7512
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
4000
-
15
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements