Uttarakhand Jal Vidyut Nigam Limited Tender
View complete overview of Uttarakhand UJVN Tender
Uttarakhand Jal Vidyut Nigam Limited - UJVN Tender
Civil And Construction
Building Construction
Eprocure
Opening Date26 Feb 2024
Closing Date20 Mar 2024
Tender Amount₹ 49,05,747
Costs
EMD
₹ 1,00,000Document Cost
₹ 2,360Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UJVN_70389_1Bid Award Id
ViewTender No
14/EE(Civil-I)/LMP/2023-24Tender Authority
Uttarakhand Jal Vidyut Nigam Limited ViewPurchaser Address
-Website
http://https://www.uttarakhandjalvidyut.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar (DSR-15.9.2)
1
-
2083.86
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. (DSR-15.12.1)
1
-
311.19
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. (DSR-15.18)
1
-
4.79
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. (DSR-15.56)
20
-
46.31
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR15.60)
10
-
223.69
... More
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (DSR-2.8.1)
50
-
220.59
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (DSR-2.25)
1
-
166.1
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (DSR-2.27)
1
-
1799.79
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (DSR-2.31)
1000
-
14.92
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos /Lindane E.C. 20% with 1% concentration. (DSR-2.35.3.1 )
1191.64
-
262.75
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR- 4.1.2 )
30
-
7068.52
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). (DSR- 4.1.3 )
10
-
6676.69
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) (DSR- 4.1.6 )
10
-
6083.69
... More
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns. (DSR-5.9.1)
10
-
332.33
... More
Centering and shuttering including strutting, propping etc. and removal of form work for : Suspended floors, roofs, landings, balconies and access platform (DSR-5.9.3)
1
-
785.81
... More
Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete: 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size). (DSR-4.5.1 )
1
-
8563.64
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). (DSR- 5.1.2)
1
-
7665.89
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). (DSR-5.3)
1
-
9750.42
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete : Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR-5.22A.6)
500
-
91.4
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DSR-10.25.2)
2500
-
146.27
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters : 80x0.90 mm M.S. laths with 0.90 mm thick top cover. (DSR-10.6.3)
1
-
2704.53
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer : Using flats 30x6mm for diagonal braces and central cross piece. (DSR-10.5.2 )
20
-
4715.04
... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. : Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (DSR-10.13.1)
1
-
120.08
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
-
-
-
... More
Profile B: Fixing with adjustable lugs with split end tail to each jamb. (DSR-10.14.1.1)
30
-
494.32
... More
Profile C: Fixing with adjustable lugs with split end tail to each jamb. (DSR-10.14.2.1)
10
-
518.43
... More
Profile E : Fixing with adjustable lugs with split end tail to each jamb. (DSR-10.14.3.1)
10
-
542.54
... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (DSR-10.15.1)
600
-
165.42
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (DSR-10.28 )
1
-
654.58
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (DSR-14.5.1 )
20
-
924.28
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately)
-
-
-
... More
Sal wood (DSR-9.1.2 )
0.05
-
98746.02
... More
Kiln seasoned and chemically treated hollock wood (DSR-9.1.3)
0.01
-
70659.36
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge:
-
-
-
... More
35 mm thick Kiln seasoned and chemically treated hollock wood shutters. (DSR-9.5.2.1)
1
-
2431.44
... More
35 mm thick Kiln seasoned selected planks of sheesham wood shutters. (DSR-9.5.3.1)
1
-
3083.35
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (DSR-9.21.1)
1
-
2027.67
... More
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (DSR-9.21.2)
43.2
-
1840.76
... More
Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.5 mm thick. (DSR-9.127.2)
18
-
886.4
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws with ISI marked M.S. pressed butt hinges bright finished of required size (35 mm thick shutters). (DSR 9.27.1.1.2)
2
-
3050.17
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws with ISI marked M.S. pressed butt hinges bright finished of required size (30 mm thick shutters). (DSR 9.27.2.1.2)
2
-
2757.84
... More
Providing and fixing 25 mm dia curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete . (DSR-9.46.3)
163.23
-
445.38
... More
Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. (DSR-9.50)
1
-
1390.81
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete: With 12 mm mild steel U beading (DSR-9.51.2 )
57.6
-
795.93
... More
Providing and fixing oxidized iron fittings for door and window, including all labour, material and T&P etc. required for proper completion of work. (NSI)
2
-
215.42
... More
Providing and fixing aluminium fittings for door and window, including all labour, material and T&P etc. required for proper completion of work. (NSI)
1
-
423.73
... More
Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete : 150 mm (DSR-14.31.1)
1
-
648.35
... More
Providing and fixing 150 mm bright finished floor brass door stopper
with rubber cushion, necessary brass screws etc. to suit shutter
thickness complete (DSR 14.34)
1
-
230.04
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (DSR-21.4.1)
1
-
2393.09
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR-21.1.1.1)
1
-
419.53
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge: Pre-laminated particle board with decorative lamination on both sides (DSR-21.2.2)
20
-
945.25
... More
P/F of (Godrej type almirah frame) 22SWG M/S sheet including mortise locking arrangement bolts and powder coated painting including labour and T&P etc. required for proper completion of the work. (NSI)
1
-
1898.31
... More
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used : With G.I. barbed wire (DSR-16.18.1)
1276
-
18.73
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge: Made of G.I. wire of dia 4 mm. (DSR-16.70.1)
30
-
862.54
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. (DSR-11.3.1)
180
-
520.51
... More
Providing and fixing glass strips in joints of terrazzo/ cement concrete floors. : 40 mm wide and 4 mm thick (DSR-11.13.1)
450
-
77.75
... More
Kota stone (25mm thick) slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (DSR-11.26.1)
1
-
1651.06
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (DSR-16.68)
1
-
823.73
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR-8.31)
99
-
1074.53
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (DSR-11.37)
25.5
-
929.28
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (DSR-11.41.2)
331.11
-
1316.48
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
... More
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm (DSR-8.2.1.1 )
1
-
2893.9
... More
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab over 0.50 sqm (DSR-8.2.1.2 )
5
-
2608.81
... More
Granite of any colour and shade. Area of slab upto 0.50 sqm (DSR-8.2.2.1 )
1
-
4587.71
... More
Granite of any colour and shade. Area of slab over 0.50 sqm (DSR-8.2.2.2 )
5
-
4352.8
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
... More
Marble work (DSR-8.3.1 )
1
-
253.05
... More
Granite work (DSR-8.3.2)
1
-
433.01
... More
Mirror polishing on marble work/stone work where ever required to give high gloss finish complete. (DSR-8.6)
1
-
429.41
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (DSR-17.1.1)
3
-
5735.08
... More
Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. : Orissa pattern W.C Pan of size 580x440 mm (DSR-14.80.2)
1
-
3795.55
... More
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. (DSR-17.15)
1
-
2360.13
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. (DSR-17.2.1)
1
-
5521.65
... More
Providing and fixing white solid plastic seat cover with lid for pedestal type W.C. pan complete : (DSR-17.20.1)
5
-
580.38
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 liters), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (DSR-17.78)
1
-
12711.14
... More
Providing and fixing floor mounted, white vitreous china single piece, double traps symphonic water closet of approved brand/ make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 liters with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (DSR-17.81)
5
-
15434.66
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 litre capacity - White. (DSR-17.18.1)
10
-
1009.03
... More
Providing and fixing wash basin size 630x450 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (DSR-17.7.2)
5
-
1886.74
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
510x1040 mm bowl depth 250 mm Kitchen sink with drain board (DSR-17.10.1.1)
1
-
5886.1
... More
610x510 mm bowl depth 200 mm Kitchen sink without drain board (DSR-17.10.2.1)
3
-
4187.12
... More
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with brass unions : 45 cm long. (DSR-18.21.2.1)
10
-
82.84
... More
Providing and fixing P.V.C. waste pipe (Flexible) for sink or wash basin including P.V.C. waste fittings complete: 32 mm dia (DSR-17.28.2.1)
10
-
101.31
... More
Providing and fixing brass bib cock (15 mm nominal bore) of approved quality : (DSR-18.15.1)
20
-
299.36
... More
Providing and fixing C.P. brass long nose bib cock with flange (15 mm nominal bore) of approved quality conforming to IS standards and weighing not less than 810 gms. ( DSR-18.50.1)
25
-
695.51
... More
Providing and fixing C.P. long nose bib cock with wall flange of Jaguar or other equivalent make : 15 mm nominal bore, including all labour, material and T&P etc required for proper completion of work. (NSI)
1
-
1500.68
... More
Providing and fixing brass stop cock (15 mm nominal bore) of approved quality : (DSR-18.16.1)
3
-
299.36
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893 : 15 mm nominal bore, including all labour, material and T&P etc required for proper completion of work. (DSR-18.53.1)
10
-
486.69
... More
Providing and fixing C.P. Angular Stop Cock with flange basin mixer and geyser points of Jaguar or other equivalent make : 15 mm nominal bore, including all labour, material and T&P etc required for proper completion of work. (NSI)
2
-
943.47
... More
Providing and fixing brass ball valve (15mm nominal bore) of approved quality, High or low pressure, with plastic floats complete : (DSR-18.18.1)
7
-
344.79
... More
Providing and fixing PTMT pillar cock of approved quality and colour: 15 mm nominal bore, 125 mm long foam flow, weighing
not less than 120 gms (DSR-18.56.2)
7
-
189.92
... More
Providing and fixing C.P. Pillar Cock of Jaguar or other equivalent make : 15 mm nominal bore, including all labour, material and T&P etc required for proper completion of work. (NSI)
1
-
1660.34
... More
Providing and fixing CP brass toilet paper holder : (DSR-17.34.1)
2
-
681.1
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter (DSR-18.22.2)
3
-
188.43
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms (DSR-17.69.2)
5
-
103.73
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and color: 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms (DSR-17.73.2)
1
-
600.81
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. (DSR-17.72)
1
-
196.57
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (DSR-18.65)
1
-
94.45
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. (DSR-17.16A)
3
-
295.89
... More
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR-17.31)
2
-
1362.67
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.(DSR-17.33)
1
-
918.22
... More
Providing and fixing (15 mm dia nominal bore) G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work - Exposed on wall. (DSR-18.10.1)
50
-
310.51
... More
Providing and fixing (20 mm dia nominal bore) G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work - Exposed on wall. (DSR-18.10.2)
1
-
370.59
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.: External work
-
-
-
... More
15 mm dia nominal bore (DSR-18.12.1)
50
-
273.01
... More
20 mm dia nominal bore (DSR-18.12.2)
10
-
312.37
... More
25 mm dia nominal bore (DSR-18.12.3)
1
-
396.4
... More
32 mm dia nominal bore (DSR-18.12.4)
1
-
457.88
... More
40 mm dia nominal bore (DSR-18.12.5)
1
-
522.92
... More
50 mm dia nominal bore (DSR-18.12.6)
1
-
645.89
... More
65 mm dia nominal bore (DSR-18.12.7)
1
-
759.83
... More
80 mm dia nominal bore (DSR-18.12.8)
1
-
882.8
... More
Providing and fixing 15mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (DSR-18.7.1)
50
-
243.05
... More
Providing and fixing 20mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (DSR-18.7.2)
1
-
283.9
... More
Providing and fixing 25mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (DSR-18.7.3)
15
-
340.3
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water 75 mm pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (DSR-12.41.1)
50
-
210.85
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water 110 mm pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (DSR-12.41.2)
10
-
319.83
... More
Providing and fixing unplasticised Rigid 160 mm dia PVC drainage/sewerage pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. (NSI )
3
-
1172.46
... More
Providing and fixing unplasticised Rigid 200 mm dia PVC drainage/sewerage pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. (NSI )
1
-
1585.55
... More
Providing and fixing fitting accessory of unplasticised Rigid 75mm dia PVC pipe, including all labour, material and T&P etc. required for proper completion of work.
-
-
-
... More
Single tee with door 75x75x75 mm (DSR-12.42.3.1)
1
-
139.15
... More
Single tee without door 75x75x75 mm (DSR-12.42.4.1)
1
-
122.29
... More
75 mm dia Bend 87.5° (DSR-12.42.5.1)
1
-
89.75
... More
75 mm dia Shoe (Plain) (DSR-12.42.6.1)
1
-
78.9
... More
75mm dia PVC pipe clips (DSR-12.43.1)
1
-
313.43
... More
75mm dia PVC Coupler (DSR-12.42.1.1)
1
-
77.71
... More
Providing and fixing fitting accessory of unplasticised Rigid 100mm dia PVC pipe, including all labour, material and T&P etc. required for proper completion of work.
-
-
-
... More
Single tee with door 110x110x110 mm (DSR-12.42.3.2)
1
-
198.43
... More
Single tee without door 110x110x110 mm (DSR-12.42.4.2)
1
-
187.58
... More
110 mm dia Bend 87.5° (DSR-12.42.5.2)
1
-
127.42
... More
110 mm dia Shoe (Plain) (DSR-12.42.6.2)
1
-
111.74
... More
110 mm dia PVC pipe clips (DSR-12.43.2)
1
-
314.66
... More
110 mm dia PVC Coupler (DSR-12.42.1.2)
1
-
115.38
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. : Circular tank (DSR-18.48)
2800
-
9.32
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR-19.32.1)
1
-
22764.32
... More
Cleaning of terrace/loft water storage tank (inside surface area)upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (DSR-14.75A)
1000
-
0.42
... More
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth. (DSR-14.77)
1
-
288.77
... More
Hire charge of Sewer Suction Machine of sufficient capacity with tractor, fuel, operator and all other required consumables for cleaning of septic tank/ manholes/inspection chambers, including loading, transporting, clean the site, unloading to approved municipal area/ STP or as approved by Engineer-in-charge. (NSI)
20
-
2441.86
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet : Sand Cast Iron S&S as per IS- 1729. (DSR-17.60.2.2)
5
-
1320.64
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) (DSR-13.1.1)
50
-
294.11
... More
12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) (DSR-13.1.2)
50
-
282.5
... More
20mm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. (DSR-13.9.2)
1
-
497.63
... More
White washing with lime to give an even shade : New work (three or more coats) (DSR-13.37.1)
1
-
33.09
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer. (DSR-13.41.1 )
3154.49
-
157.33
... More
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) (DSR-13.81.1)
300
-
53.14
... More
Treatment to cracks by using polyurethane based single component permanently elastic joint sealent of Groove size (7.5mm x 12.5 mm) including cost of all material labour T&P etc. (PWD SOR 83332 1-26-8)
10
-
204.49
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (DSR-13.45.1)
1879
-
189.49
... More
Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. (DSR-13.109.1)
1
-
95.68
... More
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. (DSR-13.53.1)
1
-
153.26
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work. (DSR-13.61.1)
1246
-
132.12
... More
Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade : One or more coats on old work. (DSR-13.99.1)
100
-
87.12
... More
Painting with aluminium paint of approved brand and manufacture to give an even shade . Two or more coats on new work (DSR-13.63.1)
200
-
124.41
... More
Varnishing with varnish of approved brand and manufacture : Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. (DSR-13.67.1)
1
-
198.14
... More
French spirit polishing : Two or more coats on new works including a coat of wood filler. (DSR-13.68.1)
1
-
378.18
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-13.80)
50
-
132.25
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. (DSR-5.30)
1
-
66.44
... More
Lettering with black Japan paint of approved brand and manufacture (DSR-13.71)
20
-
5.21
... More
Name plate/ No. plate on the residences make of acrylic sheet and complete typing on it of size as specified by Engineer in charge, including cost of all labour, material and T&P etc. required for proper completion of work . (NSI)
1
-
0.85
... More
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be separately).
-
-
-
... More
18 mm thick (DSR-9.18.1)
20
-
1055.72
... More
25 mm thick (DSR-9.18.2)
20
-
1453.56
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscosity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick (DSR 14.90.1)
200
-
455.47
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. (DSR-12.52.3)
10
-
1877.25
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² (DSR-12.1.3)
200
-
921.74
... More
Fixing of corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of corrugated G.S. sheet, purlins, rafters and trusses and including cutting to size and shape wherever required. (NSI)
120
-
203.14
... More
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m² (DSR- 12.4.1 )
1
-
918.05
... More
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m² (DSR-12.7.1)
50
-
872.58
... More
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR-12.50)
100
-
625.97
... More
Providing and fixing precoated galvanized steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) (DSR-12.51.1)
1
-
451.14
... More
Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand & manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. (DSR-14.20)
1
-
106.78
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.1.2)
20
-
6044.28
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.4.2)
20
-
7716.91
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level: Cement mortar 1:3 (1 cement :3 coarse sand) (DSR 6.13.2 )
20
-
952.37
... More
Hire charge of welding machine single phase, with welder, helper & electrodes etc for repair of doors, windows, etc for 8 hours in a day complete with all material, labor and T&P etc required for proper completion of work. (NSI)
10
-
679.86
... More
Attending minor type of repair for full day by engaging and supplying one suitable Carpenter/Mason/Mistry/Plumber etc. for carrying simple type of repairing of all work including all T & P etc. required for proper completion of the work as per direction of Engineer in charge but excluding cost of material. (NSI)
50
-
915.25
... More
Attending minor type of repair for full day by engaging and supplying one suitable Beldar/Mazdoor/Labour etc. for carrying simple type of repairing of all work including all T & P etc. required for proper complition of the work as per direction of Engineer in charge but excluding cost of material.(NSI)
50
-
745.68
... More
Structural steel work rivited, bolted or welded in built up sections, trusses and framed work including cutting, hosting, fixing in position and applying a priming coat of approved steel primer all complete but excluding cost of structural steel (labour rate only) (NSI)
1
-
35.72
... More
Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specification (PWD-Misc. 1-4)
1
-
3704.3
... More
Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specification (PWD-Misc. 1-3)
1
-
2218.8
... More
Hand Packed stone filling in back of walls including cost of all materials, royalty, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications) (PWD-Misc. 1-5)
1
-
992.6
... More
Disposal of dead body of big animal like cow, hourse, buffelo etc. from colony area to approved municipal area or as approved by Engineer-in-charge, including digging the pit and sprinkling the salf with sufficient quantity and refilling the pit, including all labour, materil and T&P etc. required for proper completion of work. (NSI)
1
-
2116.3
... More
Disposal of dead body of small animal like dog, cat, birds, snake, etc. from colony area to approved municipal area or as approved by Engineer-in-charge, including digging the pit and sprinkling the salf with sufficient quantity and refilling the pit, including all labour, materil and T&P etc. required for proper completion of work. (NSI)
1
-
514.5
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of approved quality : Square shape 450 mm internal dimensions. (DSR 19.19.1.2)
5
-
979.19
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of approved quality : Square shape 500 mm internal dimensions. (DSR 19.19.2.1)
5
-
1175.04
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. (DSR 24.2)
5
-
286.65
... More
Providing and fixing C.P. Hand Shower (Health Faucet) with wall flage of Jaguar or other equivalent make : 15 mm nominal bore, including all labour, material and T&P etc required for proper completion of work. (NSI)
10
-
1742.78
... More
Providing and laying in position specified grade of Reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level: 1:1:2 (1 cement : 1 coarse sand (zone-III) derived from natural sources : 2 graded stone aggregate 20 mm nominal size de rived from natural sources):(NSI based on DSR-5.1.2)
1
-
7485.55
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1:2 (1 cement : 1 coarse sand (zone-III) derived from natural sources : 2 graded stone aggregate 20 mm nominal size derived from natural sources.(NSI based on DSR 5.2.2)
1
-
9028.6
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1:2 (1 cement : 1 coarse sand (zone-III) derived from natural sources : 2 graded stone aggregate 20 mm nominal size derived from natural sources). (NSI based on DSR 5.3)
5
-
9481.44
... More
Providing and painting two coat of pidicreate URP compound on roof, sunshede for water proofing to check the leakage with OPC cement in the proportion of 1 : 5 (URP:cement) recommended by the manufacture including supply of all material, labour and T&P etc. required for proper completion of the work.(NSI)
1
-
250.28
... More
Cement Concrete (PCC M-30) Pavement:-
Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork, as per drawing), spreading the concrete with shovels, rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications. (PWD-Misc. 2-3)
1
-
6386
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (DSR 16.68)
1
-
823.73
... More
Mixing of admixure Sika plast 5202NS or other equivalent super plasticizing for prepration of concrete for reducung W/C and increasing workablity in RCC as per specifications or as per the direction of Engineer-in-charge include supply of all material, labour, T&P etc. with complete Item.(NSI)
2
-
86.3
... More
Engaging & operation of one no. wheel type hydraulic excavator cum loader machine 0.90/1.0 cum (preferably JCB/L&T/BEML etc.) with one operator and one helper including cost of fuel, lubricants and repair maintenance etc. for removel of slip/landslide/excavation in dry and wet condition, complete in all respect as per direction of E/C, payment for engaging excavator cum loader shall be made only for actual working hours at site, no idle charges shall be paid. If machine is trapped in slip/earth, contractor shall make its own arrangement to haul the machine, for which no extra payment shall be made to contractor and machine shall be considered in idle condition. Cost of mobilization & demobilization from site shall be borne by contractor. Engagement of JCB. Including supply of all material, labour T&P etc. required for proper complition of the work.(NSI)`
2
-
1184.7
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements