Uttarakhand Jal Sansthan Tender

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF CONTROL PANEL WITH ONE INCOMING AND TWO OUTGOING OF 20 HP FOR SUITABLE FOR ABOVE PUMP SET 01 No.STAND By.

POWER WIRING AND EARTHING MATERIAL A. SUBMERSIBLE COPPER CABLE REQUIRED FOR CONNECTION FROM STARTER TO MOTOR, SIZE 16 SQMM * 3 CORE : 60 METER FOR BOTH PUMPS B. POWER CABLE FROM MAIN TO SATRTER REQUIRED IS ALMUINUM ARM. 50 SQMM * 3.5 CORE : 80 METER C. LUGS AND JOINTING MATERIAL REQUIRED : EARTHING OF TWO PUMPS, MOTOR AND PANELS : 02 SET

SUPPLY ,INSTALLATION ,TESTING AND COMMISSIONING(SITC) ON TURNKEY BASIS FOR FULLY AUTOMATIC PUMP AUTOMATION CONTROL PANELS IN 20 H.P.OF DIFFERENT CAPACITIES HAVING INTELLIGENT UNIT HAVING “FIELD PROGRAMABLE LOGICAL CONTROLLER BASED, SCADA OPERATED PUMP MOTOR START,RUN,CONTROL,PROTECT AGAINST FAULTS AUTOMATICALLY OPERATED CONTROL & MANAGEMENT SYSTEM” FOR SUPERVISORY CONTROL AND DATA ACQUISITION SYSTEM AT PUMPING WATER SUPPLY SCHEME & TWO YEAR FREE OF COST A.M.C. FOR WARRENTY PERIOD OF FOLLOWING SUTIES AS PER SPECIFICATIONS SHEET ENCLOSED & SUITABLE FOR INTEGRATION

SUPPLY OF 02 TONNE WITH 10 METER CHAIN HEAVY DUTY CHAIN PULLEY WITH TRAVELLING TROLLEY

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF MAIN SWITCH 100 AMP AND CHANGE OVER SWITCH

AT IPS IInd Katula

SITC OF RECIPROCATING PUMPS WITH MOTOR HEAD 410 METER AND DISCHARGE 70 LPM WITH 20 HP, 1450 RPM MOTOR, 01 No.STAND By.

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF CONTROL PANEL WITH ONE INCOMING AND TWO OUTGOING OF 20 HP FOR SUITABLE FOR ABOVE PUMP SET 01 No.STAND By.

SUPPLY ,INSTALLATION ,TESTING AND COMMISSIONING(SITC) ON TURNKEY BASIS FOR FULLY AUTOMATIC PUMP AUTOMATION CONTROL PANELS IN 20 H.P.OF DIFFERENT CAPACITIES HAVING INTELLIGENT UNIT HAVING “FIELD PROGRAMABLE LOGICAL CONTROLLER BASED, SCADA OPERATED PUMP MOTOR START,RUN,CONTROL,PROTECT AGAINST FAULTS AUTOMATICALLY OPERATED CONTROL & MANAGEMENT SYSTEM” FOR SUPERVISORY CONTROL AND DATA ACQUISITION SYSTEM AT PUMPING WATER SUPPLY SCHEME & TWO YEAR FREE OF COST A.M.C. FOR WARRENTY PERIOD OF FOLLOWING SUTIES AS PER SPECIFICATIONS SHEET ENCLOSED & SUITABLE FOR INTEGRATION

POWER WIRING AND EARTHING MATERIAL A. SUBMERSIBLE COPPER CABLE REQUIRED FOR CONNECTION FROM STARTER TO MOTOR, SIZE 16 SQMM * 3 CORE : 60 METER FOR BOTH PUMPSB. POWER CABLE FROM MAIN TO SATRTER REQUIRED IS ALMUINUM ARM. 50 SQMM * 3.5 CORE : 80 METERC. LUGS AND JOINTING MATERIAL REQUIRED : EARTHING OF TWO PUMPS, MOTOR AND PANELS : 02 SET

SUPPLY OF 02 TONNE WITH 10 METER CHAIN HEAVY DUTY CHAIN PULLEY WITH TRAVELLING TROLLEY

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF MAIN SWITCH 100 AMP AND CHANGE OVER SWITCH

MAIN PIPING AND VALVES :- FOR SUCTION SIDE:

SUPPLY AND FIXING OF DOUBLE FLANGED VALVES INCLUDING NUT BOLTS, WASHER, PRESSURE PACKING ETC. COMPLETE IN ALL RESPECT. ( SITC) AS PER THE FOLLOWING 65 MM SIZE C.I. D/F SLUICE VALVE, PN1.0 FOR SUCTION SIDE : 02 NOS MAKING TEE, BAND, REDUCER AND ENLARGE BY WELDING FOR SUCTION SIDE AND PIPE AS PER REQUIREMENT OF SITE AND PIPING CONDITION, INCLUDING PIPE, LABOUR, MATERIAL, T&P ETC, COMPLETE IN ALL RESPECT. (65 mm dia. x Pump Inlet size MS DF Taper - 2 Nos., 80MM * 65 MM REDUCER : 02 NOS 65 mm dia. MS DF 900 Bend -2 Nos. 65 mm dia. MS blind flange - 01 Nos 65 MM DIA MS FLANGES FOR ABOVE : 08 NOS) FOR DELIVERY SIDE AND BYPASS ARRANGEMENT CAST STEEL SLUICE VALVE 50 MM,CLASS 600 D/F WITH FITTINGS:03 NOS CAST STEEL NON RETURN VALVE 50MM,CLASS 600 D/F WITH FITTINGS :03 NOS MS PIPE SUPPLY AND MAKING TEE,BAND,REDUCER AND ENLARGE BY WELDING AND DELIVETY SITE BOTH AS PER REQUIREMENT OF SITE AND PIPING CONDITION,INCLUDING PIPE,LABOUR,MATERIAL,T&P ETC,COMPLTE IN ALL RESPECT (50 mm dia × pump outlet size MS DF Taper-2Nos,50mm dia,MS DF 900 Bend-2Nos,50 mm dia, MS Blind Flange-1No,50 mm dia, MS Pipes in suitable length-15 Mtr 50 mm dia, MS Flange-22 Nos 50mm × 50 mm dia, MS A/F Tee -2 Nos NECESSARY NUT BOLTS,PACKING ETC)

GAUGES :- SUPPLY AND FIXING OF GAUGES AND FITTINGS PRESSURE GAUGE 100 MM DIAL SIZE OF 0-100 KG/ CM2-01 NO. COMPOUND GAUGE 100 MM DIAL SIZE OF 0-1 KG/ CM -01 NO. M.S. NIPPLE PIPES, ELBOWS ETC. REQUIRED FOR FIXING THE ABOVE GAUGES ON PUMP 01 SET.

ELECTRONIC CHLORINE DOSING SYSTEM COMPLETE IN 6 KG PRESSURE, 230 V WITH INSTALLATION, 100 LTR TANK AND CONNECT WITH STARTER COMPLETE

RUBBER INSULATION MAT

SITC OF ROLLING CONTACT SERVO VOLTAGE STABILIZER 150 KVA (3 PHASE) ISO CERTIFIED, SUITABLE FOR INDOOR USE, WITH STAND AMBIENT TEMPRATURE UPTO 55 DEG-CEL UNIT IS A COMBINATION OF THREE NO SINGLE PHASE AIR-COOLED UNITS IMMERSED IN ONE OIL COOLED TANK WITH SEPARATE CONTROL CIRCUIT FOR INDIVIDUAL CORRECTION IN EACH PHASE, COMBINATION SUITABLE FOR BALANCE-UNBALANCED SUPPLY AND LOAD. THE SERVO STABILIZER SHALL BE COMPLETE WITH HIGH/LOW VOLTAGE CUT-OFF SYSTEM, MCCB & OIL, INPUT VOLTAGE: 330- 460 VOLT, OUTPUT VOLTAGE ; 415(+/-)1% TYPE : ROLLING CONTACT (LINEAR TYPE), 80 KVA

FOUNDATION : PCC IN 1:1:5:3 IN CEMENT, COARSE SAND AND 20 MM GAUGE STONE HALLAST WITH IRON CORE DUST MIXTURE (ADDING 2 KG IRON CORE DUST WITH EACH CEMENT BAG) AND MAKING BLOCK FOR PUMP FOUNDATION COMPLETE WITH GROUTING THE FOUNDATION BOLT AS PER SESIGN AND DRAWING GIVEN BY THE PUMP MANUFACTURER INCLUDING ALL LABOUR, MATERIAL, CARTAGE, T & P ETC.

PAINTING:- ENAMEL PAINTING COMPLETE IN ALL PUMP SET FOUNDATION, VALVES , SUCTION AND DELIVERY PIPES, BARREL PIPES AS PER SUITABLE MATCHING COLOUR OR AS PER DIRECTION OF ENGINEER INCHARGE ETC. COMPLETE IN ALL RESPECT

CARTAGE OF ALL MATERIAL (LUM SUM)