Uttarakhand Agricultural Produce Marketing Board Tender

S/F hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWG M.S. sheet incorporating 16 mm dia. M.S. round bar duly bent for supporting fan hanger duly pained with red oxide and screwing arrangement with wiring conduit laid in the RCC roof before concreting alongwith supply of all material, labour T&P required for proper completion of work NSI

S/F fixing of 16 gauge M.S. drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects. For 12" dia Mirror Light NSI

Supply and fixing of 300mm Exhaust fan louvers/shutters. NSI

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) 150 sq.mm.3½ core Cat.A NSI

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) 120 sq.mm.3½ core Cat.A NSI

Supply and erection of factory fabricated and wired metal clad dust and vermin proof ploor mounting panel TPN switch board complete with following HRC type heavey duty TPN fuse awitches with fuses and instrument chamber etc. complete in all respects .The instrument chamber shall be saprate and shall comprise of flush type ammeter ,voltmeter selector switches for ammeter voltmeter instrument fuse current transformer etc. The board shall have suitable cappcity electrolytic aluminium bus bars as per IS:8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC /DMC supports with detchable side covers and shall be suitable for extension on the sides .the switches shall be complete with suitable with cable and boxes ,revers entry boxes in case of pedestal type cable socket compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer Incharge .All out going switches of 100 Amp and avobe will be provide with ammeter current transformers and selector switches etc. and istrument fuses. The switch board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm cubical type switch board shall be of Cat A, B & B = II only Outgoing 200amp TPN-3 NOS, 125amp TPN-3 NOS, 40amp TPN-1 NOS (i) Cat A Cubical type NSI

Supply of AC 230/250 volts, 50 HZ EXHAUST Fan including providing nuts, bolts, mounting frame and other accessories etc. complete. 300 mm sweep 900 rpm (Make: Bajaj/Cropmton/Havells) NSI

Supply of factory wired HPF box type fluorescent tube light fitting suitable fir 1x28 w FTL T5 fluorescent tube complete including tubes etc. on surface complete in all respects. (Make: Bajaj/Cropmton/Havells) NSI

S/F fixing of 16 gauge M.S. drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects. For 12" dia Mirror Light NSI

Supply and fixing of 300mm Exhaust fan louvers/shutters. NSI

High Back Chairs

Wooden Students Table

Students Chair

Wooden Teachers Desk

Wooden Teachers Chair

Podiums