Uttarakhand Agricultural Produce Marketing Board Tender

Supply and fixing of 16 gauge M.S. drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects. For 12" dia

Supply and fixing of 300mm Exhaust fan louvers/shutters.

Supply of LT XLPE PVC aluminium Unarmoured cable 50 Sq.mm 4core 1100 volt.

Supply and installation of 6 mtr galvanised Octagonal pole with base plate 220x220 12 top 70mm & bottom 130 mm made up of 3mm thik suitable for max wind speed upto 160 km/hr. poles with single bracket

Supply & Installation of New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source as approved by Engineer in charge complete in all respect. (Rate taken from Havells Price List w.e.f. 1st july 2017). Model-RUBY (CLEAR) - IP65 Cat AA (seg.)

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) 50 sq.mm.3½ core Cat.A

Supply and erection of factory fabricated and wired metal clad dust and vermin proof ploor mounting panel TPN switch board complete with following HRC type heavey duty TPN fuse awitches with fuses and instrument chamber etc. complete in all respects .The instrument chamber shall be saprate and shall comprise of flush type ammeter ,voltmeter selector switches for ammeter voltmeter instrument fuse current transformer etc. The board shall have suitable cappcity electrolytic aluminium bus bars as per IS:8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC /DMC supports with detchable side covers and shall be suitable for extension on the sides .the switches shall be complete with suitable with cable and boxes ,revers entry boxes in case of pedestal type cable socket compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer Incharge .All out going switches of 100 Amp and avobe will be provide with ammeter current transformers and selector switches etc. and istrument fuses. The switch board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm cubical type switch board shall be of Cat A, B & B = II only Incoming 200 Amp.ACB TPN-1 No Outgoing 100 Amp, 4P, MCCB 4 Nos.,63amp TPN-2 NOS, 40 amp TPN-3 NOS, 25amp TPN-1 NOS (i) Cat A Cubical type

Rectangular table (4 ft x 2ft ) in mild steel frame finished with 25 m.m. thick prelaminated (both sides) M.D.F. board and with edge bending in matching PVC beading, postformed as per the requirements, complete in all respects with all hardware etc.,

Officer revolving chair with 5 wheels in mild steel frame and cushion finished in fabric, complete in all respects

Visitor's chairs without wheels and in mild steel frame and cushion finished in fabric, complete in all respects

Mild steel locable cabinets (storwell almirahs) finished in power coating and all accessories, lockers etc.,

Rectangular table (12ft x 4ft) in mild steel frame finished with 25 m.m. thick prelaminated (both sides) M.D.F. board and with edge bending in matching PVC beading, postformed as per the requirements, complete in all respects with all hardware etc.,

Locker cabinets in mild steel each locker measuring 2 ft x 3 ft x 1.25 ft.

Rectangular table (6 ft x 3 ft) in mild steel frame finished with 25 m.m. thick prelaminated (both sides) M.D.F. board and with edge bending in matching PVC beading, postformed as per the requirements, complete in all respects with all hardware etc.,

Rectangular side storage cabinet (4 ft x 1.5 ft x 2.5 ft ) in mild steel frame finished with 25 m.m. thick and 15 m.m. thick prelaminated (both sides) M.D.F. board and with edge bending in matching PVC beading, postformed as per the requirements, complete in all respects with all hardware etc.,

Rectangular notice board (Pin Board) measuring 4'-0" x x4'-0" in particle board framed in teak wood and particle board mounted with appropiate coloured velvet cloth complete with hangers etc.,

Mild steel rack (3ft x 1.5 ft x 6 ft ) with lockable glass doors . (5 shelves per rack in vertical alignment

High stools (2ft 6 in high) in mild steel frame with cushion and fabric finish complete in all respects

Officer revolving chair with 5 wheels in mild steel frame and cushion finished in fabric, complete in all respects

Set of three seats in perforated powder coated galvanised steel sheet and in mild steel frame measuring 6-0" x 2-3" x 2-6" complete in all respects

Reading desk for journals and newspaper

Students chair with arm rest and mild steel fram (withourt wheels) with writing pad suppor flexible hinge arangements complete in all respests.

Teachers diad 4'6" high with laptop stand arrangemet and llocable drawres at botton in mild steel frame finished with 25 m.m. thick prelaminated (both sides) M.D.F. board and with edge bending in matching PVC beading, postformed as per the requirements, complete in all respects with all hardware etc.,

White board with duster measuring 8'-0" x 4'-0" in ,ild steel and powder coated in white colour.

Lift 04 passenger