Uttarakhand Agricultural Produce Marketing Board Tender
View complete overview of Uttarakhand UKAPMB Tender
Uttarakhand Agricultural Produce Marketing Board - UKAPMB Tender
Civil And Construction
Building Construction
Education And Training Services
Eprocure
Opening Date25 Aug 2023
Closing Date11 Sep 2023
Tender Amount₹ 5,82,38,000
Costs
EMD
₹ 11,65,000Document Cost
₹ 4,720Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_UAPMB_62371_1Bid Award Id
ViewTender No
e-nivida -205/2023Tender Authority
Uttarakhand Agricultural Produce Marketing Board ViewPurchaser Address
-Website
http://https://www.ukapmb.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and filling in plinth with sand under Floors, including watering, ramming, consolidating and dressing complete. 2.27
37.02
96866
2616.61
... More
3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration 2.35.3.1
246.81
75077
304.19
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : - 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mmnominal size) 4.1.8
32.17
249531
7756.66
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: - Cement mortar 1:4 (1 cement : 4 coarse sand) 6.1.1
12.65
108064
8542.63
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level [ 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) ]5.1.2
13.03
134737
10340.59
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to Floor five level, excluding cost of centering, shuttering, finishing and reinforcement [ (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)] 5.2.2
18.29
228035
12467.79
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more 5.22.6
3943.62
441172
111.87
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases for columns 4.3.1
82.75
31579
381.63
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, piers, abutments, pillars, posts and struts 4.3.3
169.3
166418
982.98
... More
26.42 - Providing and fixing of external wall system on Light gauge steel frame work with . Outer face having 6mm thick heavy duty fiber cement board fixed on 9mm thick heavy duty fiber cement board confirming to IS 14862:2000, category IV type A (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make. A grove of 2 mm to 3mm shall be maintained and groves shall be sealed with silicon based sealant. The board shall be fixed in a staggered pattern.Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm and internal face 12.5mm thick gypsum plaster board fixed on 8mm thick fiber cement board confirming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately). 26.42
183.94
842550
4580.57
... More
Providing and fixing internal wall panels on Light gauge steel frame work with 2.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on 8mm thick fiber cement board conforming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately) 26.43
93.83
266372
2838.88
... More
Providing and fixing in all exterior face panels breathable vapour barrier Underneath the cement fiber board as per National Building Code 2009 complete as per direction of Engineer-in-charge. 26.44
183.94
72439
393.82
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile E - Fixing with adjustable lugs with split end tail to each jamb 10.14.3.2
126.1
80045
634.78
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 9.21.1
54.48
137710
2527.72
... More
Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 250x20x6 mm 9.65.2
26
2382
91.64
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm 9.66.1
26
1213
46.69
... More
Providing and fixing aluminium hanging Floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper 9.101.2
15
1246
83.13
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 8.31
78.05
107736
1380.35
... More
Providing and laying vitrified Floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 11.41.2
493.61
992338
2010.37
... More
Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) 4.17
65
53474
822.68
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.80
555.53
85701
154.27
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : - New work (two or more coats) over and including water thinnable priming coat with cement primer 13.41.1
555.53
114211
205.59
... More
Applying priming coats with primer of approved brand and manufacture, havinglow VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre 13.85.3
555.53
44659
80.39
... More
Providing and fixing in position, 230mm thick factory made Expanded Polystyrene Core (EPS Core) roof/floor panels made of 3 mm dia G.I. wire mesh with 50 mm pitch in both the directions and on both faces of panel, kept at 120-135 mm gap and connected by the zig zag G.I. wire of 3 mm dia at alternate row by welding (at an angle ranging from 50-70 degree). The EPS core shall consist of 100 mm thick EPS of density not less than 20kg/ per cum. The bottom side of the panel shall be finished by applying a layer of 60-65 mm thick cement mortar 1: 3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} À with the help of shotcreting equipment etc at a pressure of not less than 1 bar (100Kn/m2) and surface finished with trowel. The top face of the panel shall be provided and finished by applying 70- 75 mm thick layer of cement concrete 1:1.5: 3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). Fixing operations of roof/floor panels shall be completed in all respect as per drawings and specifications and under the overall direction of the Engineer-in-charge. -26.47 26.47
287.16
1594665
5553.23
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 12.51.1 Ridges plain (500 - 600mm) 12.51.1
42.86
23904
557.74
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : - 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks) 12.45.1
198.25
296855
1497.38
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell poin.t with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface I recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Light Point Fan Point Exhaust Fan Point 1.10.3
259
343527
1326.36
... More
Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 1.31
195
104761
537.24
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1.14.1
595
116382
195.6
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 1.14.2
505
112988
223.74
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 4 sq. mm + 2 X 4 sq. mm earth wire 1.14.8
445
183629
412.65
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire1.14.9
315
166275
527.86
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connection etc. as required. 1.33
62
5398
87.08
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 1.50.1
45
21884
486.33
... More
Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with sustainable size FRLS PVC insultated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) ; 4 way (4+12), double door 2.4.1
35
143863
4110.38
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. SINGLE POLE 2.10.1
28
7465
266.61
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 2.11
20
214
10.72
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 n1A in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A 2.15.3
37
137658
3720.51
... More
Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry 'enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. 5.4
19
158230
8327.94
... More
Supplying and laying 25 mm X 5 mm G.l strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.l. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.l. nut bolt & spring washer spaced at 50mm) 5.9
15
2632
175.51
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 Marked with cover and suitable locking arrangeMent and Making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 18.48
2000
23580
11.79
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having theR mal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with claMps at 1.00 M spacing. This includes jointing of pipes and fittings with one step CPVC solvent ceMent and the cost of cutting chases and Making good the saMe including testing of joints coMplete as per direction of Engineer in Charge. Concealed work including cutting chases and Making good the walls etc., 25 MM noMinal outer dia .Pipes. 18.8.3
42
31620
752.88
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having theR mal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent ceMent, trenching, refilling and testing of joints coMplete as per direction of Engineer in Charge. External work 50 mm nominal outer dia .Pipes. 18.9.6
36
38182
1060.62
... More
Providing and fixing unplasticised Rigid PVC soil and waste pipes confoR ming to IS: 13592 Type B including jointing with seal ring confoR ming to IS : 5382 leaving 10 MM gap for theR mal expansion. Single socketed pipes for working pressure of 4 kg/sqcM. 75 MM diaMeter (MiniMuM wall thickness 3.2MM) 18.9.8
18
47407
2633.76
... More
Providing and fixing unplasticised Rigid PVC soil and waste pipes confoR ming to IS: 13592 Type B including jointing with seal ring confoR ming to IS : 5382 leaving 10 MM gap for theR mal expansion. Single socketed pipes for working pressure of 4 kg/sqcM. 100 MM diaMeter (MiniMuM wall thickness 3.2MM) 18.9.9
21
78202
3723.92
... More
Providing and fixing unplasticised PVC Moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes confoR ming to IS: 13592 Type A including jointing with seal ring confoR ming to IS : 5382 leaving 10 MM gap for theR mal expansion. Coupler 75 mm 7192,
18
434
24.12
... More
Providing and fixing unplasticised PVC Moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes confoR ming to IS: 13592 Type A including jointing with seal ring confoR ming to IS : 5382 leaving 10 MM gap for theR mal expansion. Coupler 110 mm 7193,
18
940
52.25
... More
Providing and fixing unplasticised PVC Moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes confoR ming to IS: 13592 Type A including jointing with seal ring confoR ming to IS : 5382 leaving 10 MM gap for theR mal expansion. 75 mm 7194
18
434
24.12
... More
Providing and fixing unplasticised PVC Moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes confoR ming to IS: 13592 Type A including jointing with seal ring confoR ming to IS : 5382 leaving 10 MM gap for theR mal expansion. 110 mm 7195
18
771
42.87
... More
Providing and fixing unplasticised PVC Moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes confoR ming to IS: 13592 Type A including jointing with seal ring confoR ming to IS : 5382 leaving 10 MM gap for theR mal expansion. Single tee with door 75x75x75 mm 7196,
18
1422
79.05
... More
Providing and fixing unplasticised PVC Moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes confoR ming to IS: 13592 Type A including jointing with seal ring confoR ming to IS : 5382 leaving 10 MM gap for theR mal expansion. Single tee with door 110x110x110 mm 7197
18
2218
123.26
... More
Providing and fixing unplasticised PVC Moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes confoR ming to IS: 13592 Type A including jointing with seal ring confoR ming to IS : 5382 leaving 10 MM gap for theR mal expansion. Single tee without door 75x75x75 mm 7198,
18
1109
61.63
... More
Providing and fixing unplasticised PVC Moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes confoR ming to IS: 13592 Type A including jointing with seal ring confoR ming to IS : 5382 leaving 10 MM gap for theR mal expansion. Single tee without door 110x110x110 mm 7199,
18
1953
108.52
... More
Providing and fixing unplasticised PVC Moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes confoR ming to IS: 13592 Type A including jointing with seal ring confoR ming to IS : 5382 leaving 10 MM gap for theR mal expansion. Bend 87.50 75 mm bend 7208,
18
844
46.89
... More
Providing and fixing unplasticised PVC Moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes confoR ming to IS: 13592 Type A including jointing with seal ring confoR ming to IS : 5382 leaving 10 MM gap for theR mal expansion. Bend 87.50 110 mm bend 7209
18
1422
79.05
... More
Providing and fixing white vitreous china extended wall Mounting water closet of size 780x370x690 MM of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc coMplete.
2
37117
18558.93
... More
Providing and fixing white vitreous china extended wall Mounting water closet of size 780x370x690 MM of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc coMplete. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 17.7.1
2
8273
4136.77
... More
Providing and fixing CP Brass 32MM size Bottle Trap of approved quality & Make and as per the direction of Engineer-in-charge. 17.22A
2
2366
1183.07
... More
Providing and fixing 600x450 MM beveled edge Mirror of superior glass (of approved quality) coMplete with 6 MM thick hard board ground fixed to wooden cleats with C.P. brass screws and washers coMplete. 17.31
2
3437
1718.98
... More
Providing and fixing toilet paper holder : C.P. brass 17.34.1
2
1564
782.08
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 MM noMinal bore. 18.49.1
2
1122
561.29
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved Make confoR ming to IS:8931. 18.52.1
2
1624
812.23
... More
Providing and fixing C.P. brass angle valve for basin Mixer and geyser points of approved quality confoR ming to IS:8931 15 MM noMinal bore. 18.53.1
2
1425
712.75
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diaMeter PVC. Pipe 19.2.1
12
13134
1094.58
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 200 mm diaMeter OD 19.2.3
14
21847
1560.55
... More
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes confoR ming to IS : 13592 Type A including jointing with seal ring confoR ming to IS : 5382 leaving 10 MM gap for theR mal expansion. (i) Single socketed pipes ,110 mm diaMeter (minimum wall thickness 2.2mm) 12.41.2
25
10217
408.69
... More
Providing and fixing square-Mouth S.W. gully trap class SP1 coMplete with C.I. grating brick Masonry chaMber with water tight C.I. cover with fraMe of 300 x300 MM size (inside) the weight of cover to be not less than 4.50 kg and fraMe to be not less than 2.70 kg as per standard design : 180x150 mm size P type (With well burnt bricks ) 19.4.3.1
8
25826
3228.28
... More
Constructing Masonry ChaMber 60x60x75 cM inside, in brick work in ceMent Mortar 1:4 (1 ceMent : 4 sand) for sluice valve, with C.I. surface box 100MM. top diaMeter, 160 MM bottoM diaMeter and 180 MM deep ( inside) with chained lid and RCC top slab 1:2:4 Mix (1 ceMent :2 sand : 4 graded stone aggregate 20MM noMinal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 ceMent : 5 sand : 10 graded stone aggregate 40 MM noMinal size) and inside plastering with ceMent Mortar 1:3 (1 ceMent : 3 sand) 12 MM thick finished with a floating coat of neat ceMent coMplete as per standard design : With coMMon burnt clay bricks of 25 kg /sqcM coMpressive strength. 18.33.1
2
24888
12444.21
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below 15.12.1
294
107133
364.4
... More
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet 15.28.1
2433.2
393740
161.82
... More
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead 15.25
853.4
215585
252.62
... More
Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. 15.41
2433.2
135675
55.76
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 15.6
105.12
19375
184.32
... More
Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. Not exceeding 4.00 metres in length. Sal wood beams 14.16.1.1
10.35
1309740
126545
... More
Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. Sal wood battens 14.15.1
9
1088589
120954.43
... More
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.2.1 Door chowkhats
126
228625
1814.49
... More
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.2.2 Window chowkhats
144
164187
1140.19
... More
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.2.3 Clerestory window chowkhats
24
20322
846.75
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) 14.1.2
4215.5
2404057
570.29
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) 14.6.2
181.44
375105
2067.38
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick 11.26.1
415.64
845216
2033.53
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 13.26
17896.32
4673087
261.12
... More
Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. 13.40
14965.12
2339197
156.31
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 13.47.1
2931.2
627071
213.93
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 11.36
290.88
397842
1367.72
... More
Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : 11.16.2 Medium shade pigment using 50% white cement and 50% ordinary cement
218.88
345508
1578.53
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41.2 Size of Tile 600x600 mm
218.88
436004
1991.98
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab over 0.50 sqm 8.2.1.2
43.2
146389
3388.64
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood 9.1.1
13.25
2289838
172818
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for
separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)
9.5.1 Second class teak wood 35 mm thick shutters 9.5.1.1
299.52
1436713
4796.72
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 9.9.1 Second class teak wood 30 mm thick 9.9.1.2
224.64
1181267
5258.49
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. Pre-laminated particle board with decorative lamination on both sides 21.2.2
352.8
490307
1389.76
... More
Providing and fixing 25 mm thick shutters for cup board etc. : Panelled or panelled & glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws 9.16.1.1
126
634745
5037.66
... More
Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm diameter. 14.28.2
268.8
128386
477.63
... More
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x70x4 mm (ordinary type) 9.72.2
1776
366371
206.29
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm 9.74.1
128
63490
496.02
... More
Providing and fixing bright finished brass handles with screws etc. complete: 125mm 9.81.1
592
160828
271.67
... More
Providing and fixing bright finished brass door latch with necessary screws etc. complete : 100x16x5mm 9.75.1
256
92572
361.61
... More
French spirit polishing : Two or more coats on new works including a coat of wood filler 13.68.1
596.45
278035
466.15
... More
Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) :Flame retardant face insulating board 12 mm thick 12.24.3
2117.2
2517308
1188.98
... More
Finishing walls with 30 mm thick Glass Fibre Reinforced Plastic (FRP) sheet roofing, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.h textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 13.45.1
474
2180328
4599.85
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/m² 12.1.2
2117.2
2984278
1409.54
... More
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m² 12.4.1
154
159745
1037.31
... More
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m² 12.7.1
308
312786
1015.54
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. sqm 257.95 Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. 14.72
3291.2
1127005
342.43
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore
220
119638
543.81
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
32
588452
18389.13
... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :
32
24256
758
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 17.7A
32
187073
5846.04
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 17.22A
32
37512
1172.25
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 17.31
32
54504
1703.25
... More
Providing and fixing toilet paper holder : C.P. brass 17.34.1
32
24797
774.93
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 MM noMinal bore. 18.49.1
128
71188
556.16
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved Make conforming to IS:8931. 15 mm nominal bore 18.52.1
80
64384
804.8
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 19.4.3.1
80
255899
3198.74
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade 8.10.2
12
51245
4270.43
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 17.5.2 Range of two half stall urinals with 5 litre P.V.C. automaticflushing cistern 17.5.2
6
111675
18612.55
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board. 510x1040 mm bowl depth 250 mm 17.10.1.1
8
54756
6844.52
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore. 18.53.1
32
22599
706.23
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : : 150 mm diameter 18.22.2
32
8020
250.63
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell poin.t with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface I recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. 1.10.3
100
131423
1314.23
... More
Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 1.31
140
74526
532.33
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1.14.1
300
58146
193.82
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 1.14.2
1020
226123
221.69
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 4 sq. mm + 2 X 4 sq. mm earth wire 1.14.8
260
106306
408.87
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire 1.14.9
140
73225
523.04
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connection etc. as required. 1.33
128
11045
86.29
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 1.50.1
32
15420
481.88
... More
4 way (4+12), TPN, MCB DB, double door, horizontal type 1754
32
85172
2661.64
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. SINGLE POLE 2.10.1
20
5283
264.17
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 2.11
8
84
10.62
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. 1.45
6
1616
269.48
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc., including supplying and fixing ball and socket arrangement, 2 Nos. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
384
182496
475.25
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil
86.29
27240
315.68
... More
Providing and laying in position ready mixed plain cement concrete,using fly ash and cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. All works upto plinth level: M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.19.1.1
23.73
243765
10272.46
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
26.6
272543
10245.98
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) 5.2.2
8.51
105130
12353.72
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). 5.3
10.13
131299
12961.44
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 5.22.6
3844.89
426206
110.85
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete 5.9.1
54
20419
378.14
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers 5.9.5
121.5
89041
732.85
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts 5.9.6
129.6
126229
973.99
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.20
10436.47
1409654
135.07
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube 10.26.1
816
157773
193.35
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture 13.48.3
433.84
72451
167
... More
Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand)11.1.1
175.5
202095
1151.54
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).16.69
6.75
75055
11119.34
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 6.1.1
55.66
471132
8464.47
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 6.4.1
70.11
726814
10366.78
... More
Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement 13.19.1
585.96
529801
904.16
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). Horticulture 2020 : 2.2
238
148335
623.26
... More
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :
2.4.1 Screened through sieve of I.S. designation 20 mm Horticulture 2020 : 2.4.1
119
36325
305.26
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). Horticulture 2020 : 2.8
119
7289
61.26
... More
Providing & fixing of White River (Stone) Pebbles size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge. Horticulture 2020 : 2.50
140
110217
787.27
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick 11.26.1
360
732070
2033.53
... More
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone 11.29.1
117
166896
1426.47
... More
Edging with bricks laid dry length wise, including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50 m : Common burnt clay F.P.S (non modular) bricks of Class designation 7.5 2.19.1
226
14025
62.06
... More
Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). In rows 5 cm apart in both directions 2.10.1
1150
23736
20.64
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements