Uttarakhand Agricultural Produce Marketing Board Tender

S/F hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWG M.S. sheet incorporating 16mm dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting Alongwith supply of all material, labour T&P required for proper completion of work.

Supply of Ultra modern, compact Surface mounted 1''x1'' LED Flat panel which provides soft-light and glare free symmetrical illumination LEDs 15 W LED as approved by Engineer in charge complete in all respect.

Supply of LT XLPE PVC aluminium Unarmoured cable 50 Sq.mm 4core 1100 volt.

Supply of LT XLPE PVC aluminium Unarmoured cable 150 Sq.mm 4core 1100 volt.

Supply and installation of 6 mtr galvanised Octagonal pole with base plate 220x220 12 top 70mm & bottom 130 mm made up of 3mm thik suitable for max wind speed upto 160 km/hr. poles with single bracket

Supply & Installation of New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source as approved by Engineer in charge complete in all respect. (Rate taken from Havells Price List w.e.f. 1st july 2017). Model-RUBY (CLEAR) - IP65 Cat AA (seg.)

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) 50 sq.mm.3½ core Cat.A

Supply and erection of factory fabricated and wired metal clad dust and vermin proof ploor mounting panel TPN switch board complete with following HRC type heavey duty TPN fuse awitches with fuses and instrument chamber etc. complete in all respects .The instrument chamber shall be saprate and shall comprise of flush type ammeter ,voltmeter selector switches for ammeter voltmeter instrument fuse current transformer etc. The board shall have suitable cappcity electrolytic aluminium bus bars as per IS:8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC /DMC supports with detchable side covers and shall be suitable for extension on the sides .the switches shall be complete with suitable with cable and boxes ,revers entry boxes in case of pedestal type cable socket compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer Incharge .All out going switches of 100 Amp and avobe will be provide with ammeter current transformers and selector switches etc. and istrument fuses. The switch board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm cubical type switch board shall be of Cat A, B & B = II only Incoming 200 Amp.ACB TPN-1 No Outgoing 100 Amp, 4P, MCCB 4 Nos.,63amp TPN-2 NOS, 40 amp TPN-3 NOS, 25amp TPN-1 NOS (i) Cat A Cubical type

S/F of Morley / Honeywell Panel HRZ-8e, 8 zone fire alarm control panel, 8 detection zones, 2 sound outputs, surface mounting, fire and fault relays, 318 x 356 x 92 m.m. (HxWxD)

S/F of Morley / Honeywell photoelectric smoke detector, Low profile design, low current draw, wide operating voltage 8 to 30 VDC, Bi-colour LED detector , status indicator, Automatic drift compansation, programmable sensistivity, Advance maintenance features via remote handheld test unit, tested and approved to EN54- 7:2000

S/F of Morley / Honeywell detector base 2 wire plug in detector base for series 300 detectors.

Thermal detector, low profile design, Low current

S/F of Morley / Honeywell detector base 2 wire plug in detector base for series 300 detectors.

S/F of Morley / Honeywell Sounder + Strobe Wall mounted Horn/Strobe, 12/24V red, Multi Candela 15, 15/75, 30,75 ,110, 115 cd, Plain (No lettering)

S/F of Morley / Honeywell manual call point MCP yellow, Dual pole, Flexi Element with BB India.

S/F of Morley / Honeywell remote hand held progmmer and test unit.

S/F of Morley / Honeywell remote programming interface unit

S/F of Morley / Honeywell beam detector 4 wire with 8" reflector and integral sensistivity test requires SMK 1 (Surface mounting Kit) 5-70 m. protection range spacing 9.1 to 18.3 m. Single ended reflective design User friendly alignment procedure. Six user selectable sensistivity levels, Optional integrated NFPA72 sensistivity test features, removable plug in terminal blocks, digital display for easy alignment built in automatic gain conytrol compensates for signal deterioration from dust build up remote test station option Paintable cover easiest alignment in the induatry. Heater kits for transmittor / receiver and reflector options.

S/F of Morley / Honeywell surface mounting kit. The beam SMK allows system sensor reflected beam detectors to be mounted when surface wiring is used.

S/F of Morley / Honeywell remote test station with key switch for use with beam and duct detectors

S/F of Morley / Honeywell remote test station with key switch for use with beam and duct detectors. 2.5 units

Two core shielded 1.5 m.m. wire for connections

ABC fire fighting cylinders 2/6 Kg for all type of fire

S/F of Modular fire extinguishers clean agent capacity 2Kg area of coverage approx 3 m. powder coated anti corresive charged weight 3.5 kg approx. charged pressure 15 kg approx. ceiling mounted type.

E.T.P with the capacity of 10.0 KLD.