Uttarakhand Agricultural Produce Marketing Board Tender

Supply of LT XLPE PVC aluminium Unarmoured cable 50 Sq.mm 4core 1100 volt.

Supply of LT XLPE PVC aluminium Unarmoured cable 150 Sq.mm 4core 1100 volt.

Supply and fixing of 06 mtr Gi Octagonal pole of approved make (top dia 72mm] bottam dia 130mm and base plate 12mm thick) having 3mm thikness with single arm bracket 1 mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavaction and back filling and required T&P complete in all respect,. 14750+12%G.S.T

Supply & fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 70 to 90 watt confirming to IP 65 protection complete in all respect. Cat AAA (seg.) 7110+12%%GST

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) 50 sq.mm.3½ core Cat.A 492+12%GST

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out Micor processer Release IPR2 ) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfonners and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B Only. Incoming 630 Amp @415 Volt ACB -1 No out going (a) 100 Amp. MCCB-5 Nos, & 63 Amp. MCCB-1No (B) Cat A Cubical type 557500+12%

Fire Extinguiser