Uttarakhand Agricultural Produce Marketing Board Tender

Supplying and fixing upto following amps rating, 240/415 volts, “C”curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required. 63A FP MCB

Supplying and fixing upto following amps rating, 240/415 volts, “C”curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required. 40A FP MCB

Supply of lighting fixtures of surface mounted 36W 2x2 tile LED light. The LED source used shall be complying with LM80 standards & LED source efficacy 150 lm/w. Epoxy white powder coated die cast aluminium housing; Efficient PMMA front visor;. The system lumen output of the luminaire of a minimum of 100 lms/W with color temprature of 5700 deg K (ANSI Bin) and CRI80. Integral Driver with constant current constant voltage (CVCC), P.F 0.95, THD10% and Surge Protection of atleast 3.5KV.

Supply of lighting fixtures of surface mounted 15W LED Round Downlighter luminaire. The LED source used shall be complying with LM80 standards & LED source efficacy 150 lm/w. Epoxy white powder coated die cast aluminium housing; Efficient PMMA front visor;. The system lumen output of the luminaire of a minimum of 100 lms/W with color temprature of 5700 deg K (ANSI Bin) and CRI80. Integral Driver with constant current constant voltage (CVCC), P.F 0.95, THD10% and Surge Protection of atleast 3.5KV.

Supply of lighting fixtures of surface mounted 12W LED Round Downlighter luminaire. The LED source used shall be complying with LM80 standards & LED source efficacy 150 lm/w. Epoxy white powder coated die cast aluminium housing; Efficient PMMA front visor;. The system lumen output of the luminaire of a minimum of 100 lms/W with color temprature of 5700 deg K (ANSI Bin) and CRI80. Integral Driver with constant current constant voltage (CVCC), P.F 0.95, THD10% and Surge Protection of atleast 3.5KV.

20 W linear 4ft LED integrated batten made of ultra slim co-extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.White finish ABS end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. These end caps are snap-fitted to the fixture.High efficiency long life LED with lumen efficacy of 130 lm/W with viewing angle of 120º.Powered by an integral isolated low THD electronic LED driver ( SMPS based constant current supply) with output short circuit protection, surge protection.Can be fixed directly into the wall/ ceiling by means of mounting SS clips provided with the fixture. Lumen Output of 2110 lumens with System efficacy of 105lm/W .CRI 80, Color temperature 6500K, THD 20% and PF0.95,IP20 . Life class of 35,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ.

Supply of 10W LED BulK head Fitting, The LED source used shall be complying with LM80 standards & LED source efficacy 120 lm/w. Epoxy white powder coated die cast aluminium housing; Efficient PMMA front visor;. The system lumen output of the luminaire of a minimum of 100 lms/W system efficacy with color temprature of 5700 deg K (ANSI Bin) and CRI80. Integral Driver with constant current constant voltage (CVCC), P.F 0.9, THD20%,IP65 and Surge Protection of atleast 5KV.

Supply of 100W flood light

Supply of following Ceiling Fan : 1200mm Sweep similar to Havells CAT no. - samart /RR Kabil

industrial wall bracket fan

Supplying of Heavy Duty Exhaust Fans 300 mm, 1400 RPM

industrial exhaust

Supply of UL approved low carbon high tensile steel rod with copper coating of min 254 micron JK Chemrode - 0110 CBR the dia should be 25 mm with length of 10 feet ( 3000 mm) . The rod shall be as per IEC 62561-2 and approved by UL 467. The rod shall be tested from NABL lab for current discharge not less then 46kA peak. The Chemrode shall be surrounded with 25 kg ( 1 bag) of Earth enhance materiel JK Reslow according to IEC 62561-7 and the Chemical resistance value shall not increase more then 0.067 Ωm and same will be tested from NABL lab. along with earth pit chamber made up polyplastic. Size of -254x330x260 MM (Model similar to PPC01)

11KV VCB SITC OF SF6 insulated, 11kV Extensible Compact VCB (type VCE) contained within a metal clad enclosure having degree of protection to IP-54, suitable for outdoor use, free standing and comprising, Annexure –A BILL OF MATERIAL FOR HT Switch Board: 1 – 630 Amp triple pole, vacuum circuit breaker with independent manually charged spring mechanism and fully rated earth switch with provision for earth of the cable. 1 - Air insulated cable box with gland plate suitable for a bottom entry 3 core cables up to 300 sq. mm. The unit will be complete with: 1 - Mimic diagram on front panel complete with status indicators 1 - Set of positive standard mechanical interlocks 1 - Set of current transformers for protective relays with ratio 100-50/1A 1 - Self powered relay: Ashida/Equivalent Reputed make 1 - Set of VPIS for Circuit breaker 1 - External stud for earthing connections 1 - SF6 gas pressure indicator and SF6 recharging facility 1 - Local ‘PULL TO TRIP’ mechanism for each breaker. 1 - Set of auxiliary terminals 1 - Operating handle MAKE :-LUCY / ABB

TRANSFORMER 1 No.3 phase 50 Hz 250 kVA, 11KV /415V, DYn11, core type double wound with copper conductor oil immersed ONAN cooled Distribution Transformer Off circuit Tap changer voltage ratio of 11 KV / 415V with HT & LT Cable Box. Tappings +5% to –15% in steps of 1.25% shall be provided at line end of HV winding. .Losses are as per IS -1180 Level 1 (New Ammendment)) Capacity 250 KVA Input terminals suitable for connecting 11KV XLPE aluminium conductor armoured cable enclosed in a cable box. Output terminals suitable for connecting 1.1 KV grade single core aluminium conductor cable enclosed in a cable Box. L.T. Aux. terminals connections - suitable for 1.1 KV grade PVC /XLPE cable on Transformer Part H.T.Aux. terminals – suitable for 11 KV grade XLPE Al. Cable on Transformer Part Output : 415 V +/- 1% , 3 phase 50 Hz ,Unbalanced load Winding temperature indicator with alarm and trip Contacts Pressure release valve / explosion vent to be provided on ther top of the tank. Silica gel breather Oil Temp. Indicator with alarm & trip Contacts

Medium Voltage Panel NOTE: ALL ACBs ARE REQUIRED WITH SAFETY SHUTTER, UNDER VOLTAGE RELEASE / SHUNT TRIP General Note for all Panels The Panels/ Switch-boards shall be fabricated out of (load bearing member of 2mm and non load bearing member 1.6 mm thick) CRCA sheet steel, Compartmentised design, modular construction with Form 4b separation for Main Panels & 3b for remaining, Mounting Plates and Internal Partition shall be made of 1.6/2.0mm Aluzinc sheet for better heat dessipation clear space of 300mm or as approved shall be left at the bottom.The operating handle of the topmost switch shall not be higher than 1800mm from the finished floor and maximum height of panels shall not more than 2400mm.The Panel shall be Powder coated to paint of desired shadend in an approved manner. Undervoltage Relay (27) Reverse power RELAY (32) Inverse Definite minimum time overcurrent relay Overvoltage Relay (59) Trip Circuit Supervision Relay Master Trip Relay Bucholz protection (only transformer switch ) (63) Emergency stop on each panel All incomers and Bus coupler panel door should be different colour coded for identification and mimic diagram in front of panel should be marks by reflector paints All ACB terminals shall have vertical-vertical configuration for termination of incoming & outgoing bus links. All MCCB’s up to 630A shall be provided with rear stud type terminations. Space heater, Thermostat, On/Off switch, LED Lamp , Door operated switch. All ACBs shall have protection Releases with LSIG. All Multifunction meters shall communication on ethernet through ethernet ports and shall have % THD and individual harmonics till 15 order Mimic Diagram compulsary Supply, Erection, Testing and commissioning of Indoor type ( IP 54 Protection ) cubicle pattern LT Switch-Board with a rupturing capacity of 50 KA at 415 V for 1 sec or as called for in individual items, openable in front and back suitable for 3 phase, 4 wire, 50Hz AC supply at an ambient temperature of 45 C. The cubicle should be well ventilated and enclosure protection shall be IP-54 as per IS 2147-1962.or as per CPWD specifications, ( Part IV - Sub-station) and IS: 8623 , fabricated out of (load bearing member of 2mm and non load bearing member 1.6 mm thick) CRCA sheet steel in Compartmentised design, modular construction with Form 4b separation for Main Panels & 3b for remaining, Mounting Plates and all Internal Partition shall be made of 1.6/2.0mm Aluzinc sheet for better heat dessipation. The cubicle should be front operated, floor mounted, free standing with compartments in tier formation, extensible on both sides.The panel to be provided with PVC Sleeved 4 pole Electrolytic Al .Maximum Current density for the bus bars shall meet temp rise condition. Bus Bar and PVC insulated solid interconnections and also provided with 50x6mm. horizontal AL Earth Bus Bars in each section.(as per drawing- enclosed-Main LT Panel). Panel should be extensible type. INCOMER:- (FROM 250KVA TRANSFORMER) 1 no. 500A FP By pass Switch 1 Nos 500A FP MCCB 35kA With Microprocessor Based Release (O/C,S/C,E/F) Protection & all Accessories in each : 1 No. 500A FP Contactor 1 No Under Voltage Relay (27) 1 No Over Voltage Relay (59) 1 No. Multifunction Meter With RS-485 port 1 set C.T's 500/5Amp , CL 1.0, 15VA for meter 1 set C.T's 500/5Amp , CL 1.0, 15VA for APFCR 1 No A/M Selector switch 1 set Phase Indicating LED Lamps with backup MCB 1 ses ON,OFF,TRIP indicating LED Lamps with backup MCB. Control SP MCB 1 no emergency stop push button switch (to control whole panel) INCOMER:- (FROM 200KVA DG) x1. for each : 1 Nos 400A FP MCCB 35kA With Microprocessor Based Release (O/C,S/C,E/F) Protection & all Accessories in each : 1 No. 400A FP Contactor 1 No Under Voltage Relay (27) 1 No Over Voltage Relay (59) 1 No. Multifunction Meter With RS-485 port 1 set C.T's 400/5Amp , CL 1.0, 15VA for meter 1 No A/M Selector switch 1 set Phase Indicating LED Lamps with backup MCB 1 ses ON,OFF,TRIP indicating LED Lamps with backup MCB. Control SP MCB 1 Nos. 8 window annunciator with accept / reset / test push button 1 no. 24V battery INCOMER:- (FROM 100KVA DG) x1. for each : 1 Nos 200A FP MCCB 35kA With Microprocessor Based Release (O/C,S/C,E/F) Protection & all Accessories in each : 1 No. 200A FP Contactor 1 No Under Voltage Relay (27) 1 No Over Voltage Relay (59) 1 No. Multifunction Meter With RS-485 port 1 set C.T's 200/5Amp , CL 1.0, 15VA for meter 1 No A/M Selector switch 1 set Phase Indicating LED Lamps with backup MCB 1 ses ON,OFF,TRIP indicating LED Lamps with backup MCB. Control SP MCB 1 Nos. 8 window annunciator with accept / reset / test push button 1 no. 24V battery Note: DG to be cranked from Main Panel only. AMF feature in Main panel only. DG's are on Auto Load Management via PLC. BUSCOUPLER x 1 Nos. For each: 1 Nos 500A FP MCCB 35kA With Microprocessor Based Release (O/C,S/C,E/F) Protection 1 No. 500A FP Contactor1sets ON,OFF indicating LED Lamps with backup MCB. BUSBAR :- FP aluminium bus bars of minimum 600 Amp with heat shrinkable coloured sleeves , Shrouds at Joints and including DMC/SMC bus bars supports at required interval complete for cross section, side supports and their spacing etc. for withstanding fault level of 31 MVA for 1 sec OUTGOING Note: ON Indication Light for all Outgoings. with backup MCB Section-A 1 Nos. 200Amps TPN ,MCCB with Thermal Magnetic Release adjustable with rotary handle for 150KVAR capacitor Panel 1 Nos. 320Amps FP ,MCCB with Thermal Magnetic Release adjustable with rotary handle for Workshop Area 2 Nos. 63Amps FP ,MCCB with Thermal Magnetic Release adjustable with rotary handle for External Lighting, Spare 2 Nos. 63Amps FP ,MCB for DB's 2 Nos. 40Amps FP ,MCB for DB's Section-B 1 No. 160Amps FP ,MCCB with Thermal Magnetic Release adjustable with rotary handle for Fire Fighting Panel 1 Nos. 100Amps FP ,MCCB with Thermal Magnetic Release adjustable with rotary handle for Spare 2 Nos. 63Amps FP ,MCCB with Thermal Magnetic Release adjustable with rotary handle for External Lighting, Spare 6 Nos. 63Amps FP ,MCB for DB's 4 Nos. 40Amps FP ,MCB for DB's This panel should include 1 no. Busbar mounting Surge Protection Device Class B+C/ Class 1+2 Tested as per IEC 61643 Part 11:2011 & UL 1449 4th edition . Nominal voltage -230V 50/60Hz, MCOV of 350 V , Total Impulse current-50 KA (10/350µ sec) & Total Max Discharge current 560KA (8/20µ sec), Voltage protection level 1.3 kV . The Surge Protection Devices should have TOV withstand for 120 Min 440 V and with out Follow Current & the Protection Modes for : L & N to PE . The connections (Three Lines & Neutral) should be directly connected to Protective Earth Terminal for better response time. Short- Circuit Current rating (Isccr) – 85 kA/50 Hz. Total Response time 1 nano sec. Miscellaneous items 2 nos door switch 2 nos illumination lights with 6 A,10kA MCB ILLUMINATION LED WITH HOLDER & DOOR SWITCH 2 nos 6" dia exhaust fan with thermostate & suitable canopy Internal illumination in Cable alleys with Door operated switch. complete panel as above

Supply, Erection, Testing and commissioning of indoor type cubicle pattern LT Switch-Board with a rupturing capacity of 50 KA at 415 V or as called for in individual items, openable in front and back suitable for 3 phase, 4 wire, 50Hz AC supply at an ambient temperature of 45 C. The cubicle should be vermin proof, well ventilated and enclosure protection shall be IP-54 as per IS 2147-1962.or as per CPWD specifications, ( Part IV - Sub-station) and IS: 8623 The cubicle should be front operated, floor mounted, free standing with compartments in tier formation, extensible on both sides. The panel to be provided with PVC Sleeved TPN Electrolytic Al. Bus Bar and PVC insulated solid interconnections and also provided with 50x6mm. horizontal tinned copper Earth Bus Bars in each section.95kVAR APFC Panel. 1 Nos. 200Amps TP ,MCCB with Thermal Magnetic Release adjustable with rotary handle from Main Panel 1 set of Phase Indication LED lights each backed up with 6amp. MCB 1 Nos VAF meter With RS-485 port 1 no- RMI-8 APFC Microprocessor based Relay intelligent type for Transformer and DG side, relay setting 0.8 to .98 power factor) for capacitor bank .built in PF meter suitable contactor for above 3 nos CT's 200/5A class-1(15VA) 5 nos 6 amp SP MCB 1no 6 amp DP MCB 1 no Timer on delay (series 175) 220V AC Auto / Manual selector switch (3P,2 way with OFF) 1 No Thermostat(30-80 degree) 1 No. Aux. Contactor 8NO+8NC (220V AC) 1 No. Aux. Contactor 4NO+4NC (220V AC) 3 Nos. Aux. Contactor 4NO (220V AC) BUSBAR :- 320 Amps 3 pole aluminum conductor ( CD 0.8A /sq.mm. ) bus bar (PVC sleeve Heat-shrinkable busbar insulation) supported by DMC / FRP insulator (MAIN BUSBAR) OUTGOING 8 sets of ON -OFF push buttons station red & green with ON/OFF indicating lights for each KVAR capacitor unit to indicate its position. 8 nos Ammeter suitable for each capacitor Bank with CT Branch Protection 3 nos 10 amp TP 10 KA MCB for 5 KVAr 2 nos 20 amp TP 10 KA MCB for 10 KVAr 1 nos 32 amp TP 10 KA MCB for 15 KVAr 1 nos 40 amp TP 25 KA MCCB for 20 KVAr 1 nos 63 amp TP 25 KA MCCB for 25 KVAr Capacitor Duty Contactor 3 nos. Capacitor duty contactor suitable rating for 5 kVAR Rating 2 nos. Capacitor duty contactor suitable rating for 10 kVAR Rating 1 nos Capacitor duty contactor suitable rating for 15 kVAR Rating 1 nos. Capacitor duty contactor suitable rating for 20kVAR Rating 1 nos. Capacitor duty contactor suitable rating for 25kVAR Rating Detuned Harmonic Filters 3 nos. 440 V, 14% detuned 5 Kvar reactor 2 nos. 440 V, 14% detuned 10 Kvar reactor 1 nos. 440 V, 14% detuned 15 Kvar reactor 1 nos. 440 V, 14% detuned 20 Kvar reactor 1 nos. 440 V, 14% detuned 25 Kvar reactor Capacitor Banks 3 nos. 525 V, 10 kvar super heavy Capacitor Bank for 5 kvar 2 nos. 525 V, 12.5 kvar super heavy Capacitor Bank for 10 kvar 1 nos. 525 V, 20 kvar super heavy Capacitor Bank for 15 kvar 1 nos. 525 V, 25 kvar super heavy Capacitor Bank for 20 kvar 1 nos. 525 V, 30 kvar super heavy Capacitor Bank for 25 kvar Miscellaneous items 4nos door switch 4 nos illumination lights with 6 A,10kA MCB ILLUMINATION LED WITH HOLDER & DOOR SWITCH 4 nos 6" dia exhaust fan with thermostate & suitable canopy Internal illumination in Cable alleys with Door operated switch. Complete Panel as Above and complete

Fabrication supply, installing,testing & commission and connecting with main LT Panel of indoor type dust and vermin proof hinged and lockable doors at back side made out of 14 SWG CRCA MS Sheet including painting and complete with interconnections, Top entry, cable glands,removable gland plate, plugs, bonding to earth with 2 independent earth connections having 2 nos 25x6mm GI strip at bottom of panel as earth bus ,the construction of panel shall be compartmentalised, very compact, easy in maintenance .provision of ventilation shall be through axial flow fans system Legend plate of suitable size of showing panel no. and name of panel for outgoing feeder and as per the following and as per drawing for Workshop Panel INCOMER:- 1 Nos. 320Amps FP ,MCCB with Thermal Magnetic Release adjustable with rotary handle from Rising Main 1 set Phase Indicating LED 1 Nos Multifinction Meter With RS-485 port 1 sets Current Transformer 320/5A, Cl-1.0, 10VA 6 Nos. Control MCB BUSBAR :- 400 Amps 4 pole aluminum conductor ( CD 0.8A /sq.mm. ) bus bar (PVC sleeve Heat-shrinkable busbar insulation) supported by DMC / FRP insulator (MAIN BUSBAR) OUTGOING 1 Nos. 100Amps FP ,MCCB with Thermal Magnetic Release adjustable with rotary handle 5 Nos. 63Amps FP ,MCCB with Thermal Magnetic Release adjustable with rotary handle 2 Nos. 40Amps FP ,MCCB with Thermal Magnetic Release adjustable with rotary handle 3 Nos. 63Amps FP ,MCB 2 Nos. 40Amps FP ,MCB 4 Nos. 32Amps FP ,MCB 2 Nos. 16Amps FP ,MCB 2 Nos. 10Amps FP ,MCB 1 No. Type C SPD with indication and fuse. complete panel as above

Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, wall / floor mounting type with rain canopy The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid. External Lighting Panel INCOMER: 1 no. 63 A, 16KA 4P MCCB with Thermal Magnetic based releases, ON indication, 1 no. multifunction meter with RS-485, with selector switch, matching cast resin CT's. BUS BAR TPN Aluminium bus bar with heat Shrink Sleeve rated for 100A. OUTGOING 4 nos 32A DP MCB ON indication lamps with 9 nos astronimical time swtich for automaitc switching of landscape light fixtures at sun set and sun rise or twillight ( auto on/ auto off and auto mode)with manual override faiclity with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site. 1 nos 63A 4P MCB (SPARE) 1 nos 40A 4P MCB (SPARE) Other items such as 1 Set of control wiring 1 Set of designation plates All Items complete as above

SUPPLY OF L.T. CABLE Supplying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required 4Cx10

SUPPLY OF L.T. CABLE Supplying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required 4Cx16

SUPPLY OF L.T. CABLE Supplying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required 4Cx25

SUPPLY OF L.T. CABLE Supplying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required 3.5Cx35

SUPPLY OF L.T. CABLE Supplying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required 3.5Cx50

SUPPLY OF L.T. CABLE Supplying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required 3.5Cx70

SUPPLY OF L.T. CABLE Supplying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required 3.5Cx95

SUPPLY OF L.T. CABLE Supplying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required 3.5Cx120

SUPPLY OF L.T. CABLE Supplying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required 3.5Cx150

Supply and Laying of heavy duty copper armored cables 1.1 KV grade including necessary support clamps at ceiling level and connection legs,glands etc complete in all respects. Control cable 10 core 2.5 Sq.mm

Supply & Testing of following 11 KV( UE) grade multicore Aluminium conductor XLPE insulated cable, insulation screening with extruded semi conducting compound in combination with copper tape armoured cores laid up, inner sheath of PVC tape, galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - II) and complete with all latest amendments etc. complete as required. 3 C x 70 Sq. mm 11 KV (E)

SITC of “Silent Type” following KVA Sound Attenuated DG Set comprising of engine coupled to 415V, following KVA alternator mounted on a common Base Frame along with other accessories i.e. Engine Control Panel Auto/Manual (Mounted on Engine), Fuel tank, Batteries with leads i/c AMF Panel etc. as reqd. complete. The DG Set should be supplied with cable end box to accommodate suitable size and no. of cable on alternator complete as reqd. The canopy should be designed in such a way so that the Noise level can be restricted to 75 db level at a distance of 1 meter away from the DG Set. Diesel Engine: Diesel engine 4 stroke, 6 Cylinder in Line, full Authority Electronic Engine with Mechanically Actuated Electronic Fuel Ignition System & EUI Injectors controlled by Electronic Control module , Displacement of 250 KVA diesel engine should not more than 16 L, Service Time interval 500 Hr/1 Year Whicever is earliear, water cooled, electric start, of suitable BHP at 1500 RPM suitable for following KVA output of alternator at 40 Degree C, 50%RH & at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories, Factory Inspection of complete Silent DG Set must be at principle Engine Manufacturer Work, genset must be fuel efficient at partial load like 25%,50%,75%&100%, Complete package manufacture factory. Engine mounted Instrument Panel (Auto/Manual) fitted with and having digital display for following: (i)     Start-stop switch with key (ii)   Water temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v)   Battery charging indication (vi) RPM indication (vii)  Over speed indication (viii)  Low lub. Oil trip pressure indication (ix)DG Controller having feature to show HSD fuel consumption Units/ ltr. (x) Engine Hours indication Alternator : Synchronous alternator rated at following KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class-F/H insulation Base Frame & Foundation FOR Engine and Alternator: Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. Base Frame & Foundation For Daily Service Fuel Tank: Fuel tank of suitable as per mfg Standard capacity for fabricated out of 3mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class 'C' pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. Exhaust System: Dry exhaust manifold with Industrial Grade exhaust silencer. Starting System: 24v DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (25 plates, 180 Amp / as per OEM.-Hour capacity lead acid type) as required as per specifications. Acoustic and weather proof enclosure Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per specifications. 200 KVADG Set

SITC of “Silent Type” following KVA Sound Attenuated DG Set comprising of engine coupled to 415V, following KVA alternator mounted on a common Base Frame along with other accessories i.e. Engine Control Panel Auto/Manual (Mounted on Engine), Fuel tank, Batteries with leads i/c AMF Panel etc. as reqd. complete. The DG Set should be supplied with cable end box to accommodate suitable size and no. of cable on alternator complete as reqd. The canopy should be designed in such a way so that the Noise level can be restricted to 75 db level at a distance of 1 meter away from the DG Set. Diesel Engine: Diesel engine 4 stroke, 6 Cylinder in Line, full Authority Electronic Engine with Mechanically Actuated Electronic Fuel Ignition System & EUI Injectors controlled by Electronic Control module , Displacement of 250 KVA diesel engine should not more than 16 L, Service Time interval 500 Hr/1 Year Whicever is earliear, water cooled, electric start, of suitable BHP at 1500 RPM suitable for following KVA output of alternator at 40 Degree C, 50%RH & at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories, Factory Inspection of complete Silent DG Set must be at principle Engine Manufacturer Work, genset must be fuel efficient at partial load like 25%,50%,75%&100%, Complete package manufacture factory. Engine mounted Instrument Panel (Auto/Manual) fitted with and having digital display for following: (i)     Start-stop switch with key (ii)   Water temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v)   Battery charging indication (vi) RPM indication (vii)  Over speed indication (viii)  Low lub. Oil trip pressure indication (ix)DG Controller having feature to show HSD fuel consumption Units/ ltr. (x) Engine Hours indication Alternator : Synchronous alternator rated at following KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class-F/H insulation Base Frame & Foundation FOR Engine and Alternator: Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. Base Frame & Foundation For Daily Service Fuel Tank: Fuel tank of suitable as per mfg Standard capacity for fabricated out of 3mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class 'C' pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. Exhaust System: Dry exhaust manifold with Industrial Grade exhaust silencer. Starting System: 24v DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (25 plates, 180 Amp / as per OEM.-Hour capacity lead acid type) as required as per specifications. Acoustic and weather proof enclosure Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per specifications 100 KVADG Set

Supply, Installation, Testing And Commisioning of 1 No. Indoor Digital Micro Processor Based Servo Voltage Stabilizer 250 kVA, Linear Type, Indoor, 3 Phase, Balanced Type, Input Voltage 330-470V Output voltage 400V ±1% .

Supply, Installation, Testing & Commissioning of Wireless Indoor Access Point Combined data rate support Dual 5GHz : 4.8Gbps , 802.11ax , 2.4 GHz / 5GHz: 4x4 : 4SS WiFi 6, data rate upto 2400 Mpbs, Four 2.4GHz omnidirectional antennas with 4 dBi peak gain, Four 5GHz omnidirectional antennas with 6 dBi peak gain, vBLE 16-element Directional Antenna Array + Omni Bluetooth Antenna, Transmit Beamforming and Maximal Ratio Combining the WLAN Access Point solution should have integrtaed dynamic packet capture, WIPS, Dedicated Third Radio, detection of rougue and honeypot Access Point detection, able to create WxLAN policies . The solution should be artifical intelligence based self healing soltion. Bluetooth® LE and IoTsensor support Humidity Pressure Temperature, should also support Asset Tracking if required in future without any change in Hardware. Omni-directional Bluetooth Antenna , superbeacon mode with iBeacon and Eddystone, OFDMA & BSS Coloring support. Operating temp. 0 to 40 degree. Wireless OEM should be leader in Gartner Wired Wireless & Data Centre latest reports.

Supply, Installation, Testing & Commissioning of of 24 Port POE+ Access Switches with switching capaticy of 128 Gbps, forwarding performance 95 Mpps, having 24 x 10/100/1000BASE-T PoE-plus(RJ45) with 2 x 10G SFP+ uplink ports. Should support for Stacking/VC with stacking cable with stacking bandwidth of maximum 40 Gbps as and when required. Should support min 2GB internal DRAM, 2GB internal Flash memory, 16K MAC address. Should have Static Routing , Neighbor discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), Domain Name System (DNS) and IPv6 features from day 1 and should support OSPF, VRRP, OSPFv3 and PIM.

Roller brake tester

Suspension tester

Side slip tester

Joint Play tester

Steering gear play detector (Electronic Turn Tables)

Fully Automatic Head light tester

Smoke Meter (Opacimeter)

Exhaust gas analyzer

Speedometer Tester

Sound level Meter

OBD scan tool

Test fingres

Insulation Tester

Roller brake tester

Joint Play tester

Steering gear play detector (Electronic Turn Tables)

Side slip tester

Fully Automatic Head light tester

Smoke Meter (Opacimeter)

Exhaust gas analyzer

Speedometer

Sound Level Meter

OBD scan tool

Test fingres

Insulation Tester

Bogie Roller Set: 2 nos.

Free wheel Trolley: 2 nos.

Calibration Equipment set: 1 no.

Automatic Tyre pressure filler and indicator: 4 nos.

Automatic Number Plate Reader Camera: 4 nos.

Desktops:14 nos.

Speed dome camera:1 no.

CCTV:18 nos.

Sticker Printer: 3 nos.

Report / Certificate Printer: 3 nos.

Server: 2 nos.

Audio paging: 1 no.

LAN Network: Necessary LAN network hardware