State Project Management Unit Tender

(b) Dismantaling of rig machine after completion of work and carting back

Digging of pit for water & Water arrangement during drilling

Drilling of 400 mm size bore by cutter & drill pipe

Supply of ISI marked ERW pipes of following sizes.(7.9 mm Thick)

200 mm

150 mm

150 mm dia (slot 1/ 16)

Accessories for above pipes as below .

M.S. Socket 200 mm

Socket 150mm

Bail plug

Well cap 200 mm

Reducer 200x150

P- gravel 1.6 mm to 4.8 mm

Lowering of Assembly

200 mm

150 mm

150 mm slotted

Development of drilled tube well By Air Compressor (350PSI)

(i )Carting of compressor and T&P to site of work upto 40 km.

(ii) Erection of compressor .

(iii) Development of Tube Well.

(iv)Dismantling of compressor unit after completion of work and back to store.

By O.P. Unit.

(i) Carting of OP unit and T&P to site of work up to 40 km.

(ii) Erection of OP unit

(iii) Development of Tube Well.

(iv) Dismantling of OP unit after completion of work and carting to store

Chemical and Bacteriological water testing

Discharge measurment by V notch arrangement

Leveling of water works.

Construction of Pump House as per design and specifications complete in all respect including all matrial, labour and T & P required for proper complition of work

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. - All kinds of soil.

Concrete with 4 cm gauge stone ballast, local sand and cement in proportion of 6:3:1 in foundation, including supply of all materials, labour, T&P etc. required for proper completion of the work.

Concrete with 4 cm gauge stone ballast, local sand and cement in proportion of 4:2:1 in superstructure, including supply of all materials, labour, T&P etc. required for proper completion of the work.

First class brick work in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion the work.

40 mm thick damp proof course with cement and approved coarse sand & 12.5mm stone grit1:2:4 including 5% water proofing materials, or as specified by manufacturers, supply of all materials, labour, T&P etc. required for proper completion the work including curing.

1st class brick work in 1:6 cement and local sand mortar in superstructure including supply of all materials, labour, T&P etc. required for proper completion the work.

Providing and fixing T iron frames for door, windows, and ventilators of MS tee section, joints mitered and welded with 15x3mm lugs 10cm long embeded in cement concrete block 15x10x10cm in 1:3:6 and applying primer coat of approved steel primer.

Centering and shuttering including strutting,roping and removal of forms of roof

Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Mild steel or iron work in RCC work wrought to required shape as necessary including bending for proper completion of work including supply of steel and wastage etc.

Providing and fixing MS grill of required pattern in frames of windows etc with M.S.flats square or round bars etc.including priming coat with approved steel primer all complete. Fixed to steel window by welding

Grading roof for water proofing treatment with cement mortar 1:3 (1cement : 3coarse sand )

12 mm thick plaster with cement & local sand mortar in 1:6 over brick work minimum thickness not to be less than 10 mm including supply of all materials, labour, T&P etc. required for proper completion the work.

Same as above item no. 14 but in proportion 1:3 with 20 mm thick cement and local sand mortar over ceiling with a floating coat of neat cement

Same as above item no. 14 but in proportion 1:4 with 15 mm thick cement and local sand mortar over ceiling with a floating coat of neat cement

Raised and cut pointing with cement and coarse sand mortar in 1:3 on brick work including supply of all materials, labour, T&P etc. required for proper completion the work.

40 mm thick 1:2:4 P.C.C. floor with cement and coarse sand & 2 cm gauge approved stone ballast laid in panels finished with 3 mm floating coat of neat cement and 7.5 cm thick base concrete consisting of cement and local sand and 1st class brick.

Providing & fixing of 4 mm thick and 40 mm wide glass strips in flooring.

Providing & fixing 3.5 cm thick flush door shutters conforming IS: 2202 including supply and fixing and adjustment of hinges, bolts, handles and springs and other fittings.

Supply & fixing 4 mm thick plain glass in windows including supply of nails and putty etc. required for proper completion of the work.

Painting or varnishing of new iron or wood work with one coat of priming and two coasts of approved paint and varnish including supply of all materials, labour, T&P etc. required for proper completion of the work.

White washing three coats including supply of all materials labour, T&P etc. required for proper completion of the work.

Finishing exterior walls with Acrilic smooth exterior paint two or more coat including priming coat of exterior primer

Supply and fixing of girder of 250 mm × 125 mm size 15 m, over the pump house including its painting with approved paint and also one coat of primer.

Providing, supply and Installation of solar motor pump set 5 HP 200 lpm discharge at 47 m head with suitable valve withsuitable valve etc, solar pump controller and solar panels ( solar modules poly crystal 260-325 W) of proper size required to run the pumping system, Suitable Power panel cable ISI marked & Water pump supply cable, 1 no -Mounting structure with tracking system, Earthing and lighting arrestor etc with all specifications.

Solar light with battery

Providing of all materials,Carting from site store to site of work,laying and jointing of GIM. screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipeline etc complete: 50 mm dia

Excavation in soil mixed with shingle boulders etc. requiring the use of specials T&P, if any, for pipeline trenches including lift up to 1.5 m. and lead up to 30 m with backfilling, watering , ramming of excavated earth in the trenches

Supply and fixing of 50 mm dia C.I. D/F Sluice Valves Confirming to IS: 14846-2000 Pressure PN 1.6

Supply and fixing of 40 mm dia C.I. D/F Non Return Valve Pressure PN 1.6

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 corase sand ) for sluice valve, with C.I. surface box 100x100x75 mm with hinge cover fixed in RCC slab 1:2:4 cement sand and 20mm grit necessary excavation foundation concrete 1:5:10 and inside plastering with cement mortar 1:3 .12mm thick finished with floating coat of neat cement chambers as per type design including supply of all materials labour T&P etc complete

Supply and fixing of automatic on/off system including electronic level sensor at OHT

Soil testing of proposed 65 KL capacity, 12 m staging O.H.T. site by some repute institute like IIT or equvalent and accordingly design by a repute structural engineer and construction of O.H.T. (65 KL capacity with 12 m Staging) with foundation considering seismic forces, including supply of all materials, labour and T&P etc as required for proper completion of work and submissoin of detailed design/drawings before starting of work. The earthquake resistant design must be in conformity with IS:456, IS:3770, IS:1893, IS:13932 & IS:13920 (latest versions) etc. Water retaining portion ie container of O.H.T. will be constructed in M30 design mix concrete as per latest guidelines of BIS. The work also include 1 m. wide balcony around the tank at the middle ring beam (junction of conical wall and containers vertical wall), 1 m wide RCC stair case as an access to the top dome of the tank from ground level, supply & fixing of MS gate with locking arrangement on first landing to avoid access to the O.H.T. as per direction of engineer in charge, supply and fixing of 60 cm wide MS ladder from top dome to inside of the tank up to bottom dome of 50x50x6 mm angle iron in 20 mm dia plain MS bar@25 cm C/C welded or rivetted with suitable hand rail etc, supply & fixing of 1200 mm dia ventilator of 50x50x6 mmm angle iron fitted at the crown of top dome with mosquito proof wire mesh over expanded metal jali, supply & fixing of 600x600 mm MS MH cover of 5 mm thick MS plate duly hinged with 50x50x6 mm angle iron frame embedded with the top dome at appropriate place with locking arrangement, supply & fixing of 3 rows of GI(M) 20 mm dia pipe railing with 50x50x6 mm angle iron posts of clear height 1 m at distance of 1.25 m C/C around the balcony, Top dome and along the stair case from GL to top dome, Supply & fixing of water level indicator conforming to latest specification a nd as per direction nof engineer in charge and supply & fixing of lightening conductor arrangements i/c earthiung as per latest IS code, S/F of 40 mm dia inlet, 100 mm dia outlet, washout and overflowpipes, All GI(M), and their sluice valves (conforming to IS:780) duck foot bend and other specials including construction of valve chambers with RCC covers, testing tank for water tightness and making it water tight, painting the entire tank with three coats of exterior weather coat apex or equivalent of asian, burger, narolac etc of approved colour and shade, painting balcony and stair case railing and MS cover, vantilator, angle iron posts with one coat of oxide primer and 2 coats of paint of approved quality and shade and construction of 40 mm thick CC floor beneath O.H.T.

Supply of following HDPE pipe including laying and, Jointing, field Testing , commissioning completed at site , HDPE ( PE 80 Grade, PN 6) as per IS 4984-1995 and specification for water application including all cost of material. Labour required, Transportation, loading, unloading and stacking etc. completed in all respect of works HDPE pipe -110 mm dia

HDPE pipe -90 mm dia

Supply and fixing of CI D/F Sluice valve/ gate valve for flow regulation and scouring - 125 mm Dia

Supply and fixing of CI D/F Sluice valve/ gate valve for flow regulation and scouring - 100 mm Dia

Excavation of pipe line in soil mixed with course sand, single , kankar, including refilling of trenches after laying of pipeline including watering , hammering etc completed in all respect of work.

Dismantling of Cement concrete road surfaces for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials.

Reinstatement of Cement concrete road surfaces after laying of pipe line including supply of all material ,labour,T&P etc complete.

Constructing masonry chamber 90 x90x 100 cm inside with 75 class designation brick work in cement mortar 1: 4 ( i cement : 4 coarse sand) for sluice valve / Gate valve with Ci Surface box 100 x100x75 mm with hinge cover fixdedin RCC slab 1: 2:4 cement sand and 20 mm grit nacessary excavation foundation concrete 1:5;10 and inside plastering with cement mortar 1:3 12 mm thick finished with floating coat of neat cement chamber as per type design including supply of all material labour T & P etc complete

Construction of pillar type Stand post completed in all respect of work as per type design.

Operation and Maintenance of Water Supply Scheme including repair of pipe line/valve leakage, repair/ replacement of damaged pipes, valves, motor pump set, solar panels etc and maintain proper potable water supply on daily basis etc.

For 1st year

For 2nd year

For 3rd year

For 4th year

For 5th year