Rural Works Department Tender
View complete overview of Uttarakhand RWD Tender
Rural Works Department - RWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date17 Feb 2023
Closing Date2 Mar 2023
Tender AmountRefer Documents
Costs
EMD
₹ 4,71,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_RES_55139_1Bid Award Id
ViewTender No
letter no. 1286 dated 15-02-2023Tender Authority
Rural Works Department ViewPurchaser Address
-Website
http://https://res.uk.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
391.28
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
78.36
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size)
54.65
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level
86.19
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works above Plinth level upto Floor V level
77.69
-
-
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Mild steel and Medium Tensile steel bars.Thermo-Mechanically Treated bars.
22935.97
-
-
Centering and shuttering including strutting, propping etc. and removal of
form for :Foundations, footings, bases of columns, etc. for mass concrete
119.59
-
-
Suspended floors, roofs, landings, balconies and access platform
126.31
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
530.92
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
331.07
-
-
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)
41.35
-
-
Brick work with F.P.S. bricks of class designation 75 in superstructure above and below plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand)
157.69
-
-
Providing and laying damp-proof course 50mm thick with cement
concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone
aggregate 20mm nominal size).
31.13
-
-
providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification
135.33
-
-
Providing & applying a coat of residual petroleum bitumen of grade of
VG-10 of approved quality using 1.7kg per square metre on damp proof
course after cleaning the surface with brushes and finally with apiece
of cloth lightly soaked in kerosene oil.
31.13
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
164.26
-
-
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks).
165.26
-
-
Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete.
23.6
-
-
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
1185.15
-
-
6 mm cement plaster of mix :
1:3 (1 cement : 3 fine sand)
123.73
-
-
15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)
712.64
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:
3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over
75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and
consolidated and grouted with fine sand, including finishing the top
smooth.
81.21
-
-
Supplying chemical emulsion in sealed containers including delivery as
specified-Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
162.42
-
-
Diluting and injecting chemical emulsion for CONSTRUCTIONAL
anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete :With Chlorpyriphos/ Lindane E.C. 20% with 1%concentration
135.35
-
-
Treatment of soil under existing floors using chemical emulsion
@ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration
368.23
-
-
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting
of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of
vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse
sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each
other with bitumen @ 1.7 kg/sqm).
24.58
-
-
Providing Providing wood work in frames of doors, windows, clerestory windows
and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class teak wood
1.43
-
-
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with
frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of
shutters-35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
35.07
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm
minimum depth on all edges of flush door shutters (over all area of door
shutter to be measured).
35.07
-
-
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush
doors (cost of glass excluded) (overall area of door shutter to be
measured):
28.77
-
-
Providing & Fixing decorative high pressure laminated sheet of plain /
wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick
70.14
-
-
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :50x12 mm 2nd class teak wood
126.65
-
-
French spirit polishing :Two or more coats on new works including a coat of wood filler
117.36
-
-
Melamine polishing on wood work (one or more coat).
117.36
-
-
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).
48.82
-
-
Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels)
made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area
of window above 1.75 sqm).
61.49
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness (weight not
less than 20 kg/ sqm)
113.83
-
-
Providing and fixing 12 mm thick frameless toughened glass door
shutter of approved brand and manufacture, including providing and
fixing top & bottom pivot & double action hydraulic floor spring
type fixing arrangement and making necessary holes etc. for fixing
required door fittings, all complete as per direction of Engineer-incharge
(Door handle, lock and stopper etc.to be paid separately).
5.04
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm
thickness
2
-
-
Providing and fixing aluminium tubular handle bar 32 mm outer dia,
3.0 mm thick & 2100 mm long with SS screws etc .complete as per
direction of Engineer-in-Charge.Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar
4
-
-
Providing and fixing Glass Door Lock for above(Glass to Glass Lock Round type).Complete with Fixing /Labour etc. (Make -Godrej)
1
-
-
Providing and fixing-Roofing with 16 mm security glass (in two layers of toughened glass with a sandwiched security film), including MS or Aluminium framework laid along the roof slope. All glass and roof edges to be sealed and made water tight with metal strips and sealants and guaranteed against any leakages.
36
-
-
Providing and fixing 1st quality ceramic glazed floor tiles conforming to
IS : 15622 (thickness to be specified by the manufacturer ) of approved
make in all colours, shades except burgundy, bottle green, black of any
size as approved by Engineer-in-Charge in skirting, risers of steps and
dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse
sand) and jointing with grey cement slurry @ 3.3kg per sqm including
pointing in white cement mixed with pigment of matching shade
complete
54.5
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make,
in all colours, shades except burgundy, bottle green, black of any size as
approved by Engineer-in-Charge, in skirting, risers of steps and dados,
over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm, including pointing
in white cement mixed with pigment of matching shade complete.
257.75
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete Size of Tile 60x60 cm
279.99
-
-
Tile work in skirting, risers of steps and dado (up to 2 m height) over 12 mm thick bed of cement
37.4
-
-
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with -Udaipur Green Marble
182.27
-
-
Providing and fixing 18mm thick gang saw cut mirror polished Granite (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any colour and shade (Area of slab over 0.50 sqm)
17.01
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanitiesetc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge.
37.8
-
-
Extra for providing opening of required size & shape for wash basin/
kitchen sink in kitchen platform, vanity counter and similar location in
marble/ Granite/ stone work, including necessary holes for pillar taps
etc. including moulding, rubbing and polishing of cut edges etc. complete
9
-
-
Providing and fixing bright finished brass handles with screws etc. complete: 125 mm
46
-
-
Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc. complete.
23
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete :250x10 mm
46
-
-
Providing and fixing bright finished brass butt hinges with necessary
screws etc. complete :125x85x5.5 mm (heavy type)
92
-
-
Providing and fixing bright finished brass door latch with necessary screwsetc. complete :300x16x5 mm
21
-
-
Providing and fixing aluminium die cast body tubular type universal
hydraulic door closer (having brand logo with ISI, IS : 3564, embossed
on the body, door weight upto 35 kg and door width upto 700 mm), with
necessary accessories and screws etc. complete.
11
-
-
Providing and fixing bright finished brass 100 mm mortice latch and lock
with 6 levers and a pair of lever handles of approved quality with necessary
screws etc. complete.
9
-
-
Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15
mm, anodised (anodic coating not less than grade AC 10 as per IS :
1868) transparent or dyed to required colour or shade, with necessary
screws etc. complete.
4
-
-
Providing and fixing false ceiling at all height including providing and
fixing of frame work made of special sections, power pressed from
M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both
side inclusive) as per IS : 277 and consisting of angle cleats of size
25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash
fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangeof cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish
of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3
layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and
also including the cost of making openings for light fittings, grills,
diffusers, cutouts made with frame of perimeter channels suitably
fixed, all complete as per drawings, specification and direction of
the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board
conforming to IS: 2095- (Part I) : 2011 (Board with BIS
certification marks)
332.18
-
-
Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete
1766.48
-
-
Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade :Two or more coats on new work
1369.37
-
-
Supplying and installation of moisture resistant/fire resistant 6 mm
thick Heavy duty fiber cement board (High pressure steam cured)
conforming to IS 14862:2000 of category III type B as per standard
sizes fixed with self-drilling / taping screws. Screws shall be of counter
sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length
varying from 25 to 45 mm.
120.28
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface
1766.49
-
-
Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied
@ 2.20kg/10 sqm
397.11
-
-
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.8mm thick-Granite of any colour and shade
262.99
-
-
Steel work welded in built up sections/ framed work, including cutting,
hoisting, fixing in position and applying a priming coat of approved steel
primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates
and similar works-for stair case railing
856.26
-
-
Providing and fixing hand rail of approved size by welding etc. to steel
ladder railing, balcony railing, staircase railing and similar works, including
applying priming coat of approved steel primer.
430.25
-
-
Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
15864
-
-
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat of enamel paint
604.54
-
-
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape
wherever required.
508.4
-
-
Providing and fixing thermal insulation of ceiling (under deck
insulation) with Resin Bonded Rockwool conforming to IS: 8183,
density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene
bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60
cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most
ceiling of building.
508.4
-
-
Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid forseparately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood-35 mm thick shutters
2.92
-
-
Providing and fixing panelling or panelling and glazing in panelled or
panelled and glazed shutters for doors, windows and clerestory windows
(Area of opening for panel inserts excluding portion inside grooves or
rebates to be measured). Panelling for panelled or panelled and glazed
shutters 25 mm to 40 mm thick :Second class teak wood
5.11
-
-
Providing & fixing in position Phenol bonded Bamboowood wall
cladding at all height with planks of sizes 10mm thick, 1800mm
length (minimum) and 130 mm wide (minimum), in approved colour,
texture and finish, having Performance Appraisal Certificate (PAC)
issued by Building Materials & Technology Promotion Council
(BMTPC), with necesasary profiled edges fixed with 40mm SS screws
5 nos in each tile to frame work made of second class teak wood of
size 20x15 mm in centre of each tile and bottom and top of work
height, 40x15mm placed at ends of each tile. The cladding shall be
laid over backlayment of 1.00 mm thick expanded polyethylene foam
of density 40kg/cum in two layers, first layer on wall surface before
fixing wooden frame and second layer on frame under cladding. The
bamboowood planks shall have minimum density of 1000 Kg/cum
& minimum Hardness 1000 Kgf. with Eco friendly UV coating, all
complete as per direction of the Engineer in-charge.
116.46
-
-
Providing and fixing precoated galvanised steel sheet roofing
accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating
120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7
microns epoxy primer on both side of the sheet and polyester top
coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm)
25
-
-
Providing and fixing precoated galvanised steel sheet roofing
accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating
120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7
microns epoxy primer on both side of the sheet and polyester top
coat 15-18 microns using self drilling/ self tapping screws complete Gutter .(600 mm over all girth)
42
-
-
Stone tile (polished) work for wall lining over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm
including pointing in white cement complete.Raj nagar plain white marble/ Udaipur green
marble/ Zebra black marble
34.52
-
-
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above
plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all
complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
3.04
-
-
18 mm thick moulded cement mortar band in two coats under layer 12 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) top layer 6 mm thick with cement mortar 1:4 (1 cement : 4 fine sand).
22.8
-
-
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement
mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar
1:4 (1 cement : 4 coarse sand) and finished neat complete.
17.1
-
-
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:
a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as
specified, as per the approved shop drawings and as directed by the
Engineer-in-Charge. However, for the purpose of payment, only the actual
area on the external face of the curtain wall with Aluminum Composite
Panel Cladding (including width of groove) shall be measured
in sqm. up to two decimal places
12.2
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood,
trees and saplings of girth up to 30 cm measured at a height of 1 m
above ground level and removal of rubbish up to a distance of 50 m
outside the periphery of the area cleared.
560
-
-
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
141.75
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal
ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.110 mm diameter
45
-
-
Centering shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, butteresses,
plinth and string courses etc
22.53
-
-
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand)
0.62
-
-
Half brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand)
1
-
-
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick
honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m
long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
15 mm cement plaster finished with a floating coat of neat cement of mix 1:4 ( 1 cement : 3 fine sand)
10.6
-
-
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.Using rough kota stone.
6.79
-
-
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge :
16.17
-
-
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistant test as per specification and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manhole with 30x20x15 cm cement concrete block 1:3:6 (1cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
20
-
-
Providing and fixing in position pre cast RCC manhole cover and frame of required shape and approved quality.HD-20-Circular shape 560mm internal dia
2
-
-
Providing and laying 40-60mm thick (Delhi Quartz) Cobble Stone , of approved size, design & shape, laid in required colour and pattern over and including 50mm thick bed of Cement Mortar (1:4) all complete as per the direction of Engineer-in-charge
135
-
-
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
8.1
-
-
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/6 litre(adjustable to 4 litre/8 litres) including seat cover and cistern fittings,nuts,bolts and gasket etc complete.
9
-
-
Providing and fixing wash basin with CI brackets,15mm C.P. brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fittings & brackets,cutting and making good the walls wherever required.White Vitreous china wash basin size 630x450 mm with a single 15mm CP brass pillar tap.
9
-
-
Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.510 X 1050 mm bowl depth 225mm
5
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape & size with plastic moulded frame of approved make & shade with 6mm thick hard board backing.Rectangular shape 453 X 357 mm
9
-
-
Providing and fixing 600x120x5mm glass shelf with edges round off,supported on anodised aluminium angle frame with CP brass brackets and guard rail complete with 40mm long screws,rawl pugs etc. complete.
8
-
-
Providing and fixing toilet paper holder. CP brass.
9
-
-
Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete .Semi rigid pipe 40 mm dia
3
-
-
Providing and fixing brass bib cock of approved quality.15 mm nominal bore.
4
-
-
Providing and fixing C.P.brass long body bib cock of approved quality conforming to IS standard and Weighing not less than 690 gms. 15 mm nominal bore.
6
-
-
Providing and fixing C.P.brass extension nipple 9size 15mmx50mm) of approved make and quality as per direction of Engineer-in -charge.
26
-
-
Providing and fixing C.P.brass bottle trap 32mm size bottle trap of approved quality & make as approved by Engineer-in-charge.
9
-
-
Providing and fixing soil,waste and vent pipes:Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:3989100mm dia
75
-
-
Centrifugally cast (spun) iron socketed pipe as per IS:398975mm diameter:
40
-
-
Providing and filling the joints with spun yarn, cement slurry and cement mortal 1:2 (1 cement : 2 fine sand ) in S.C.I/C.I pipes:75mm dia pipe
40
-
-
Providing and filling the joints with spun yarn, cement slurry and cement mortal 1:2 (1 cement : 2 fine sand ) in S.C.I/C.I pipes: 100mm dia pipe
75
-
-
Providing and fixing M.S holder- bat clamps of approved design to send cast iron/cast iron ( spun) pipe embedded in and including cement concrete block 10 x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc:For 100mm dia pipe
38
-
-
Providing and fixing M.S holder- bat clamps of approved design to send cast iron/cast iron ( spun) pipe embedded in and including cement concrete block 10 x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc:For 75mm dia pipe
8
-
-
Providing and fixing bend of required degree with accesss door,insertion rubber washer 3mm thick, bolts and nuts complete.100 mm diaSand cast iron S&S as per IS-3989
18
-
-
Providing and fixing plain bend of required degreeSand cast iron S&S as per IS-3989100 mm dia
18
-
-
Providing and fixing bend of required degree with accesss door,insertion rubber washer 3mm thick, bolts and nuts complete.75 mm diaSand cast iron S&S as per IS-3989
6
-
-
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.100x100x100mm .Sand cast iron S&S as per IS-3989
16
-
-
Providing and fixing single equal plain junction of required degree .100x100x100mm.Sand cast iron S&S as per IS-3989
6
-
-
Providing and fixing terminal guard:100mm
16
-
-
Providing and fixing terminal guard:75mm
8
-
-
Providing and fixing collar:100mm
24
-
-
Providing and fixing collar:75 mm
8
-
-
Providing lead caulked joints to sand cast iron/ centrifugally cast(spun) iron pipes and fitting of diameter:100 mm
75
-
-
Providing lead caulked joints to sand cast iron/ centrifugally cast(spun) iron pipes and fitting of diameter:75 mm
40
-
-
Providing nad fixing M.S stays nad clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter:100 mm
8
-
-
Providing nad fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:100 mm inlet and 100 mm outlet
16
-
-
Cutting chases in brick mansonry walls for following diameter sand cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 12.5mm nominal size), incliding necessary plaster and pointing in cement mortal 1:4 (1 cement :4 coarse sand):100mm dia
24
-
-
Cutting chases in brick mansonry walls for following diameter sand cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 12.5mm nominal size), incliding necessary plaster and pointing in cement mortal 1:4 (1 cement :4 coarse sand):75mm dia
8
-
-
Painting sand iron/centrifugally cast (spun) iron soil, waste vent pipe and fittings with two coats of synthetic enamel paints of any colour such as chocolate grey, or buff etc.over a coat of primer (of approved quality) for new work:100 mm diameter pipe
75
-
-
Painting sand iron/centrifugally cast (spun) iron soil, waste vent pipe and fittings with two coats of synthetic enamel paints of any colour such as chocolate grey, or buff etc.over a coat of primer (of approved quality) for new work:75 mm diameter pipe
16
-
-
Repaintingsand cast iron/ centrifugally cast iron (spun) iron/centrifugally cast iron (spun) iron, soil, waste, vent pipes and fitting with one coat of synthetic enamel paint of any colour such as chocolate,grey or buff etc.100 mm diameter pipe
75
-
-
Repaintingsand cast iron/ centrifugally cast iron (spun) iron/centrifugally cast iron (spun) iron, soil, waste, vent pipes and fitting with one coat of synthetic enamel paint of any colour such as chocolate,grey or buff etc.75 mm diameter pipe
16
-
-
Providing and fixing PTMT 15mm urinal spreader size 95x69x100mm with 1/2 inch BSP thread and shapes,weighing not less than 60 gms.
2
-
-
Providing & fixing white vitreous china water less urinal of size 600 x
330 x 315 mm having antibacterial /germs free ceramic surface,
fixed with cartridge having debris catcher and hygiene seal.
2
-
-
Providing & fixing Health Faucet with 8mm dia, 1.2 M long PVC tube and wall hook. Make: Jaquar; Cat No. ALD -573N/approved equal make.
9
-
-
Providing & fixing Sink Mixer with Swinging Casted Spout (Wall Mounted Jaquar model ARI-39173-B /approved equal) with 450mm long braided hoses.
3
-
-
Providing, fixing, testing and commissioning of inlet fittings with maximum 3 inlets 40, 50 & 75 mm OD size pipe, fixed to 'P' traps including joints complete .
9
-
-
Providing & fixing 100m x 50mm G.I. waste with G.I. reducer & nipple including cutting chases, the floor / slab complete as required.
9
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge.20 mm nominal outer dia pipes.
30
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge25 mm nominal outer dia pipes..
70
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge.32 mm nominal outer dia pipes.
40
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge.40 mm nominal outer dia pipes.
24
-
-
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge. Concealed work including cutting chases and making good the walls etc.20 mm nominal outer dia pipes.
80
-
-
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge. 25 mm nominal outer dia pipes.
15
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching,refilling and testing of joints complete as per direction of engineer in charge. .External Work 20 mm nominal outer dia pipes.
30
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching,refilling and testing of joints complete as per direction of engineer in charge. .External Work 25 mm nominal outer dia pipes.
40
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching,refilling and testing of joints complete as per direction of engineer in charge. .External Work 32 mm nominal outer dia pipes.
105
-
-
Making connection of GI distribution branch with GI main of following sizes by providing and fixing tee,including cutting and threading the pipes etc, complete.25 to 40mm nominal bore
3
-
-
Fixing water meter and stop cock in GI pipe line including cutting and threading the pipe and making long screws etc. Complete (cost of water meter and stop cock to be paid separately).
3
-
-
Providing and fixing gunmetal gate valve with CI wheel of approved quality(screwed end).25 mm dia nominal bore
6
-
-
Providing and fixing gunmetal gate valve with CI wheel of approved quality(screwed end).20 mm dia nominal bore
15
-
-
Providing and fixing gunmetal gate valve with CI wheel of approved quality(screwed end).32 mm dia nominal bore
6
-
-
Providing and fixing gunmetal gate valve with CI wheel of approved quality(screwed end).40 mm dia nominal bore
3
-
-
Providing and fixing brass stop cock of approved quality15 mm nominal bore
6
-
-
Providing and fixing brass stop cock of approved quality20 mm nominal bore
6
-
-
Providing and fixing P.V.C connection with brass union. 45cm length.15mm nominal bore
30
-
-
Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality conforming to I.S:8931.15 mm nominal bore
30
-
-
Providing and placing on terrace (at all floor levels) Polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement amd making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
6000
-
-
Providing & fixing on wall face unplasticised -Ragid PVC rain water pipes conforming to IS ; 13592 Tyape A included jointing with seal ring conforning to IS ; 5382 leaving 10 mm gap for thermal expansion.a)110 mm diameter
86
-
-
Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised - Rigid PVC rain water pipes conforming to IS ; 13592 Type A including jointing with seal ring conforming to IS ; 5382 leaving 10 mm gap for thermal expansion.a)Coupler-110mm diameter
12
-
-
Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised - Rigid PVC rain water pipes conforming to IS ; 13592 Type A including jointing with seal ring conforming to IS ; 5382 leaving 10 mm gap for thermal expansion.b)Bend-87.5deg-110mm diameter
12
-
-
Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised - Rigid PVC rain water pipes conforming to IS ; 13592 Type A including jointing with seal c)Shoe-110mm shoering conforming to IS ; 5382 leaving 10 mm gap for thermal expansion.
12
-
-
Providing & fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1cement : 4 coarse sand) and making good the wall etc. complete.110mm dia
12
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighting not less than 440 grams.
12
-
-
Providing & fixing GI pipes complete with GI fittings including trenching and refilling etc..32mm nominal bore
40
-
-
Providing & fixing GI pipes complete with GI fittings including trenching and refilling etc..40mm nominal bore
16
-
-
Providing & fixing GI pipes complete with GI fittings including trenching and refilling etc..50mm nominal bore
40
-
-
Painting GI pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality.32mm diameter pipe
40
-
-
Painting GI pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality.40mm diameter pipe
16
-
-
Painting GI pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality.50mm diameter pipe
40
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100mm diameter pipe
40
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter pipe
100
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed ,within a lead of 50m.All kinds of soil
20
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth,including consolidating each deposited layer by ramming,watering,etc. and disposing of surplus excavated soil as directed ,within a lead of 50m.Pipes. cables exceeding 80mm dia but not exceeding 300mm dia.
100
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
15
-
-
Cement plaster with floating coat of neat cement---15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix with 1:4 (1 cement : 4 fine sand)1:3 (1 cement : 3 fine sand)
45
-
-
Providing and laying light duty non-pressure NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 150 mm dia. R.C.C. pipe
100
-
-
Providing and fixing square mouth SW gully trap class SP-1 complete with CI grating brick masonry chamber and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg. as per standard design.with common burnt clay F.P.S. (non modular) bricks of class designation 7.5.150x100mm size P type
11
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregrate 40mm nominal size ) inside plastering 12 mm thick with cement mortar 1:3 (1 Cement : 3 coarse sand) finished with floating coat of neat cement & making channels in cement concrete 1:2:4 mix (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80cm and 45cm deep including C.I. cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15 kg)Withcommon burnt clay FPS (non modular)bricks of class designation 7.5
12
-
-
Extra for depth for manholesSize 90x80 cm With common burnt clay FPS (non modular)bricks of class designation 7.5
3
-
-
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistant test as per specification and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manhole with 30x20x15 cm cement concrete block 1:3:6 (1cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
30
-
-
Providing and fixing in position pre-cast RCC manhole cover and frame of required shape & approved qualityCircular shape 560 mm internal diameter-EHD-35
12
-
-
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 ( 1 cement :4 coarse sand) including 500x450mm precast R.C.C. horizontal grating with frame complete as per standard design: With common burnt clay F.P.S. bricks(non modular) of class designation 7.5
12
-
-
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 ( 1 cement :4 coarse sand) with precast R.C.C. vertical grating complete as per standard design: With common burnt clay F.P.S. bricks(non modular) of class designation 7.5
18
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements