Rural Works Department Tender

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet nd 15/16 A modular switch, connections etc. as required

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet

WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single re cable in surface/ recessed PVC conduit as required. 2 x 1.5 sq. mm + 1 x 1.5 sq mm earth wire.

……do….. But with 2 nos x 2.5 sq.mm in 19mm dia conduit with 1 no. 2.5 sq.mm. PVC insulated copper conductor earth continuity wire.

……do….. But with 2 nos x 4 sq.mm in 19mm dia conduit with 1 no. 4.0sq.mm. PVC insulated copper conductor earth continuity wire.

……do….. But with 2 nos x 6 sq.mm in 19mm dia conduit with 1 no. 6.0sq.mm. PVC insulated copper conductor earth continuity wire.

……do….. But with 4 nos x 6sq.mm in 19mm dia conduit with 2 no. 6.0sq.mm. PVC insulated copper conductor earth continuity wire.

CREB S / F Ceiling rose : Supplying and fixing 3 pin 5amp ceiling rose including connection etc. as required.

BRHOLD S / F brass holder : Supplying and fixing brass batten / angle holder including connection etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4way TPN

MCBC S/F C series SP MCB S/F 5 amo 32 amp rating,240V C series MCB on existing DB complete with connections.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. FOR 63 Amp

Supply and fixing of electronic fan regulator dimmer 250/230 watts ISI marked on existing switch board .

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. For up to 450 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requiredI orNTERNET POINT

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.1 or 2 Module (75 mmX75 mm)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required for 25mm

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required 1.53.1

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as equired.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)

S/F of foolowing ways surface recess mounting vertical type 415V TPN MCB DB of sheet steel ,dust protected enclosure of 200A tinned cu bus bar vertical type MCB TPDB 4 WAY ( 4+12) double doors.

S/F of 40 watt indoor recess mounting LED squre fitting for armstrong ceiling having powder coated die cast aluminium housing with body with extended heat sinck,diffuser of polycarbonate matrial and driver set complete in all respect.

Supply and fixing of recess/surface mounting round 24 Watt to 32 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/Reflector and driver set completed in all respects.

S/F of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 30 watt. Confiming to IP 66 protection complete in all respect.

S/F of L.E.D tube light with batten suitable for upto 1x22watt LED tube light fitting including tube on surface complete in all respect.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. hick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the ngineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.3.5x70 sq mm

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. hick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the ngineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.3.5x50 sq mm

Supply and burring of Safe Earthing Electrode T-39 ZnZinc Coated, Length 2000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

S/F of fire extinguisher, ABC type 6.00kg capacity (ISI Marked IS;15683 &TAC Approved) complete with initial charge and wall bracket,along with supply of all materials and labour for proper completion of work

Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work

S&F of 200 AMP four pole Mouled case type on load change over switch with enclosure including the cost of labour, T & P and material reuired for proper completion of the work as per direction and satisfaction of Engineer an charge.

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting,M.S. Channel Base with bottom and top cable entreis Electrical control anel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be eparate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each hase with touch type selector switches for different readings,instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum usbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes,compression glands and indicating lamp on incoming etc. The Job includes he grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.I/C 200 Amp. MCCB-1 No AND O/G 100 Amp. MCCB-1 No & 63 Amp. MCCB-3 Nos.

S/F of hexagonal G.P fan box of approved make made up of 1.00mm thick ISImarked G.P sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box holes should be semi shuttered type with 0.5mm G.P sheet made upper &lowercoverduly screwed fitted with 300mm round zinc coated completion of the work.

S&F of 200 A. 415 V Metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect.

Supply of Ceiling fan 1200MM size.BAJAJ Make 235 m³/min Air Delivery, 390 revolution per minute Color : Brown Wattage : 74 W

Supply of Domestic Exhaust fan 300MM size.BAJAJ Make

S/F of LED Lamps for 12 Watts BAJAJ MAKE

SITC of Vertical air terminal with accessories: Air terminals as per IS-IEC -62305 part-3 16 mm rod tapered to 10 mm aluminum rod, 3 Mtr Air terminal: semi-hard (E-AlMgSiO5) suitable for high wind load. Accessories: System consists of Fang Fix with base and clamp, on the top air terminal is erected. Fang fix clamp made of SS, lightning tested for 100 KA 10/350 micro sec waveform. 16 KG stone of 365 mm diameter, high level of stability. Concrete, frost-resistant, can be stacked.

SITC of 8 mm Aluminum Round Conductor & Meets the requirements of IS/IEC 62305. Cross Section 50 Sq mm, Semi hard Al Mg Si 0.5

SITC of Roof conductor holder for sheet. Roof conductor holder of polyamide, bottom section stainless steel with Ø 8.5 mm slot. Weather and temperature resistant from -35°C to +90°C

SITC of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. Tested for 100kA lightning current.

SITC of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Conforms to the requirements according to DIN VDE 0185-305 (IS-IEC 62305)(2nos/expansion piece )

SITC of Hot dip galvanized Cross connector for T and cross connection, BET Tested for round conductor 8-10 mm with hexagonal bolts M6 x 16(VA)

SITC of Hot dip galvanized Test Joint suitable to connect 8-10 mm round conductor and max by 5 mm GI strip with 4 hexagonal bolts stainless steel M 6 x 12 BET Tested & Meets the requirements IS/IEC 62305

SITC of flat conductor holder suitable for FL 30. Installed with 2 hexagonal bolts.

SITC of flat strip, 30x3 mm hot dip Galvanized steel strip Meets the requirements of IS/IEC 62305 and Zinc coating of 500 g/m² (approx 70 μm)

SITC of maintenance free Copper bonded earth rod of 2000 mm electrode having diameter of 14.2 mm with 250 micron copper coating. Earth enhancing mineral compound 25 kg which is not required frequent addition of water. FRP earth pit chamber. The systems is conforming to IEC 60364, IEC 62561, IS/IEC 62305 & IS 3043