Rural Works Department Tender

Supplying and fixing metal box of 150mm X 75mm X 60mmdeep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing andfixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch,connections, painting etc. as required.

Wiring for circuit/submain wiring alongwith earth wire with 2x1.5sq.mm+1x1.5sq.mm of FRLS PVC insulated copper conductor,single core cable in surface/recessed medium class PVC conduit as required.

Same as above but for 2x2.5sq.mm+1x2.5sq.mm earth wire.

Same as above but for 2x4.0sq.mm+1x4.0sq.mm earth wire.

Same as above but for 2x6.0 sq.mm+1x6.0 sq.mm earth wire.

Same as above but for 4x6.0 sq.mm+2x6.0 sq.mm earth wire.

Same as above but for 4x10.0 sq.mm+2x6.0 sq.mm earth wire.

S/D of 20mm dia medium class PVC conduit along with accessories in surface/recess, complete in all respect.

S/D of 25mm dia medium class PVC conduit along with accessories in surface/recess, complete in all respect.

S/F of suitable size GI box with modular plate & cover in front and 6 pin 5/6 & 15/16 amps modular switch and socket on surface or in recess,complete in all respect.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required..Single pole

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.75 mm X 75 mm X 60 mm deep

S/L of 25mmx5mm G.I.earth strip conductor earth electrode,complete in all respect.

S/F of 20 amp,240 volts SPN industrial type socket outlet with 2 pole & earth metal enclosed plug top alongwith 20amps "C"series SP MCB in sheet steel enclosure,complete in all respect.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 AMP

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required 2 run of cable

S/F of 3 pin,5 amp.ceiling rose on the existing jonction box,including connection etc.as required.

S/F of brass batten/angle holder including connection etc.as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required

S & F surface/Flush mounting 4ways V TPN distribution board without additional Door without MCB complete in all respect, as directed at site by Engineer in charge.CAT A

S&F of 800 AMP four pole Mouled case type on load change over switch with enclosure including the cost of labour, T & P and material reuired for proper completion of the work as per direction and satisfaction of Engineer an charge.

S&F and making connection of 40 Amp. 4 pole 30mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge.

Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for propercompletion of work to the satisfaction of Engineer in charge of work.

S/F of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 52 to 72 watt,complete in all respect. Catt.AA

S/L of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts. 50 sq.mm.3 & 1/2 core,Complete in all respect.

S/L of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts6 sq. mm 2 core,Complete in all respect.

Supply and burring of Safe Earthing Electrode T-19 ZnZinc Coated, Length 2000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified

S/F of LED tube light fitting with batten for 1x22 watt.LED tube light ,complete in all respect. Catt.AA

Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

S/F of CO2 type fire extinguisher,4.50 kg capacity (ISI marked IS : 2878 & TAC approved) complete with initial charge & wall bracket,complete in all respect.

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out , Micor processer Release IPR2 ) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects.. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. . . The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B Only INCOMING 800 Amp /415Volt ACB-1 No OUT GOING 400 Amp MCCB-1 No, 200 Amp MCCB-1No,100 Amp MCCB-1 No & 63 Amp MCCB-1 No CAT B

S/F of exhaust fan 300 mm of reputed make,complete in all respect.

S/F of 15 watt LED,complete in all respect.