Public Works Department Tender
View complete overview of Uttarakhand PWD Tender
Public Works Department - PWD Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date6 Nov 2024
Closing Soon21 Nov 2024
Tender Amount₹ 79,18,161
Costs
EMD
₹ 1,59,000Document Cost
₹ 4,720Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_pwd_77572_1Tender No
417/2A.C. Dated 28-10-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://pwd.uk.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.
47.19
-
-
Extra for every additional lift of 1 . 5 m or part thereof in excavation I banking excavated or stacked materials.
All kinds of soil
16
-
-
Extra for every additional lift of 1 . 5 m or part thereof in excavation I banking excavated or stacked materials.
Ordinary or hard rock
3.96
-
-
CONCRETE WORK
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:
1 :2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
3.46
-
-
REINFORCED CEMENT CONCRETE
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
21.05
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
40.71
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
41.86
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
148.32
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-5000 or more.
3625.27
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-5000 or more.
5537.86
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana I Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.:
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works upto plinth level
Concrete of M25 grade with minimum cement
content of 330 kg /cum
29.2
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana I Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.:
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works above plinth level upto floor V level
Concrete of M25 grade with minimum cement
content of 330 kg /cum
19.83
-
-
MASONRY WORK
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
Cement mortar 1 :4 (1 cement: 4 coarse sand)
23
-
-
STONE WORK
-
-
-
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1 : 6 : 1 2 (1 cement: 6 coarse sand : 1 2 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1 :6 (1 cement: 6 coarse sand)
20.7
-
-
CLADDING WORK
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red
Area of slab over 0.50 sqm
12.5
-
-
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
26.4
-
-
Providing and fixing cramps of required size & shape in RCC/ CC I Brick masonry backing with cement mortar 1 :2 ( 1 cement :2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps
198.4
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.
Fastener with threaded dia 6 mm
1984
-
-
WOOD AND P.V.C. WORK
-
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood
0.23
-
-
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Kiln seasoned and chemically treated hollock wood
1.03
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately)
35 mm thick shutters
10.8
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
Second class teak wood
1.01
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).
3.54
-
-
Extra for providing frosted glass panes 4 mm thick (weight not less than 1 0 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 1 0 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
3.54
-
-
Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm, 1 :3:6 mix (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
36
-
-
STEEL WORK
-
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
10349.25
-
-
FINISHING
-
-
-
12 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
162.61
-
-
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :
Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
162.61
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
17.75
-
-
French spirit polishing :
Two or more coats on new works including a coat of wood filler
31.42
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface
to prepare the surface even and smooth complete.
162.61
-
-
Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade.
29.6
-
-
FLOORING
-
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of
the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement: 4 coarse sand):
25 mm thick
18.3
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 1 2 mm (average) thick cement mortar 1 :3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
3.3
-
-
NON-SCHEDULE ITEMS
-
-
-
Stone work (machine cut edges) for wall lining etc. upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :
Himalayan stone - exposed face fine dressed with
rough backing
50 mm thick ( 450mm x 200mm) (Wall Cladding Stone)
178.55
-
-
Providing and fixing bright finished brass handles with screws etc. complete: Pull handle Model no-VISH GS Size 200 mm, (Ref From DSR 9.81.1)
4
-
-
Providing and fixing bright finished brass handles with screws etc. complete: Pull handle Model no-VISH AB Size 100 mm (Ref From DSR 9.81.1)
8
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete Model no- VX Size (200x12) mm (Ref From DSR 9.74.2)
8
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete Model no- VX Size (150x12)mm, (Ref From DSR 9.74.3)
24
-
-
Providing and fixing bright finished brass 250 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Model No-Lever Handle Tango CY with Lock body and cylinder 60mm OSK (Ref From DSR 9.76)
2
-
-
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : Size (100x75x3) mm, (Ref From DSR 9.72.3)
24
-
-
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : Size (125x75x4) mm, (Ref DSR 9.72.1)
16
-
-
Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
Brass casement stays (straight peg type ) 200 mm weighing not less than 0.24 kg
Size 150 mm (Ref from DSR 9.86.3)
8
-
-
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
Model No- DS 02
Size: 140 mm (Ref from DSR 9.82)
8
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body,door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (Ref DSR 9.84) Aluminium extruded section body tubular type universal hydraulic door closer DC 80 PDC
4
-
-
Providing, laying and fixing of Deodar Wood as in built runner having size of 100mmX75 mm through out over masonary course during construction of wall as per detail drawing. It allows to apply adhesive on top and bottom of wood surface with additional fixing accessories of GI nut & bolt/ anchor fastners, nails, screws etc. to masonary work or provided RCC runner to protect against demormation with all due respect to complete the job. It allows providing and applying minimum two coats of approved water base PU polishing complete with required primer / sealer coat, rubbing, sand papering, powdering, etc. to exposed surface complete as per manufacturer specification.
14.4
-
-
Providing, laying and fixing of Deodar Wood as in built runner having size of 400mmX65 mm through out over masonary course during construction of wall as per detail drawing. It allows to apply adhesive on top and bottom of wood surface with additional fixing accessories of GI nut & bolt/ anchor fastners, nails, screws etc. to masonary work or provided RCC runner to protect against demormation with all due respect to complete the job. It allows providing and applying minimum two coats of approved water base PU polishing complete with required primer / sealer coat, rubbing, sand papering, powdering, etc. to exposed surface complete as per manufacturer specification.
107.2
-
-
Providing and fixing Deodar Wood ceiling in 25 mm thick 150 mm wide deodar wood plank.
83.46
-
-
25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with :
Decorative Tiles and Board
Second class deodar wood
35.28
-
-
Providing and fixing Deodar Wood Jhalar (Manually Hand Carved) in 25 mm thick 300 mm wide deodar wood plank.
11.04
-
-
Two or more coats on new works including a coat of wood filler
Hydro Oil For Exterior Coating
222.29
-
-
Supply, transportation, installation, fitting & fixing and supervision of Laminated Asphalt Shingles having multilayer Panel produce three dimensional profile and shadow lines with fiber glass mat, Waterproof, durable coating, temper proof, 110mph wind resistance, UL Class-A, fire resistance rating, exposure 5.5/ 8 inch, weight up to 450 Pound/ 100 Sqft. Or more, high end products last 30 years & more as per instructions laid on ASTM D3462, ASTM D3018, ASTM D7158-Class-H. The Laminated Asphalt Shingles as per specifications must be laid in proper way over 20mm Cement Fiber Board Make - Everest or Equivalent. and moisture barrier membrane and Algae resistant Ridge with all required fixtures & fastenings as a complete job as per instructions and satisfaction of Engineer-in-charge with contractors’ own material, labour, tools, lead, lift, T&P, etc.
The design and methodology to be approved by Eingeer-in-charge prior commencement of the work. The rate included cost of materials, transportation to site, installation, fixing, pegging, pre-installation preparation works, supervision, petty works involved, taxes, GST, etc. as a compete job.
68.75
-
-
ELECTRIFICATION OF ENTRANCE GATE AT MANA MASTERPLAN
-
-
-
DISTRIBUTION BOARDS
-
-
-
Supply, installation, testing and commissioning following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) - 12way, Double door (IP43, IK09)
1
-
-
Supply, installation, testing and commissioning following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) - 6 way, Double door (IP43, IK09)
1
-
-
Supply, installation, testing and commissioning 'B' series, SP MCB Supply, installation, testing and commissioning 5 amps to 32 amps rating, 240 volts, 'B' series, miniature circuit breaker suitable for lighting and other loads of folloeing poles int the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
12
-
-
Supply, installation, testing and commissioning following rating, double pole, (single phase and neutral), 240 V, residual current breaker with overload (RCBO), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required 25A. Approved Makes-LEGRAND / SCHNIEDER / SIEMENS / L&T / ABB
2
-
-
Laying and fixing of PVC insulated and PVC sheathed / XLPE power
cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
25
-
-
Supply, connection, testing and commissioning of heavy duty, medium voltage,
XLPE (IS 7098 - PART-II) insulated, Stranded AL / Cu conductor
Armoured / Flexible cables as per specification & IS. The cable shall have outer sheeth of XLPE and inner sheath of PVC with stranded AL conductor wherever specified.
The cable shall be laid underground in excavated trench / prepared trench / hume pipes when laid outside the building. Cable shall be laid throught preapred trench / cable tray / duct / hume pipe / channel / floor trunks etc when laid inside the building as instructed by PMC/Site Incharge.
The scope shall include:
1) Supply of Cables.(With Non Returnable Drums)
2) Delivery of the cables at site.
3) Unloading at site store.
4) Shifting of cable from site store to place of installation.
5) Connection of cable with proper tagging as specified ni specifications.
6) Supply & fixing of cable clamps, brackets, supports, route markers etc. where ever required to fix the cables safely.
7) Earthing the glands and armouring with earthing clamp and jumper and also connecting to common earth bar.
8) Testing of insulation and continuity of cable and submission of reports to the client's representative.
9) To prepare submission drawing and to take approval of consultant at each stage.
10) To prepare & submit as-built drawing and handing over document to end user.
11) Rate shall be inclusive of route markers at 15mtr intervals
12) Each run of cable to be tested with 1KV meggar
13) Proper cables tags of Aluminium shall be made and feeder shall be written.
Approved Makes- FINOLEX / RAVIN / POLYCAB / RR KABEL / GEMSCAB /KEI / HAVELLS
-
-
-
3C x 10 Sq.mm. CU XLPE armored cable
15
-
-
3C x 4 Sq.mm. CU XLPE armored cable
10
-
-
3C x 2.5 Sq.mm. CU XLPE armored cable
10
-
-
Supply and Providing heavy duty double compression brass gland and lugs end terminations,IP 66 complete,SIBG type, for the cable specified under above item with Bi-metallic lugs using crimping tool, Insulation tape, Identification tags etc., including end termination and Earthing of Gland.
Approved Makes- DOWELL’S / 3D / HEX JAINSON / COMET / HMI/CCI
-
-
-
3C x 10 Sq.mm. CU XLPE armored cable
2
-
-
3C x 4 Sq.mm. CU XLPE armored cable
2
-
-
3C x 2.5 Sq.mm. CU XLPE armored cable
2
-
-
Point wiring in PVC conduit, with modular type switch: Wiring for light point/ fan ponit/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc.as required- Group C
41
-
-
light plug point modular type accessories: Supplying and flxing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and flxing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).
2
-
-
power plug point modular type accessories: Supplying and flxing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and flxing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.
4
-
-
Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire
20
-
-
Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire
20
-
-
Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
30
-
-
Brass holder Supplying and flxing brass batten/angle holder including connection etc. as required.
2
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch
2
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet
2
-
-
Supply, installation, testing and commissioning of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same
in case of recessed conduit as required.
-
-
-
25 mm
85
-
-
32 mm
30
-
-
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
150
-
-
Supply, Installation, Testing and Commissioning of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 25.0 mm with copper coating thickness of 250micron tested as per IEC 62561-2 + Universal clamp (SS), 25mm + Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested OEC 2 25 + The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Under floor earth inspection pit. Cost include to have earth pit cover, testing of all things, etc. in all complete manner. Approved Makes-OBO/ JEFF/CAPE
8
-
-
18W, 2000 Lumen Recess mounted LED Down light fixtures:
Supply, Installation, assembling, connection, testing & commissioning of 18W, 2000 Lumen Recess mounted LED Down light fixtures equivalent to Philips make DN296B LED15S-6500 PSU WH complete with suitable rating lamps and all other necessary accessories to complete the installations as per specifications.
Approved Makes-Philips/Wipro/K-Lite/Lighting Technologies
4
-
-
Weather Proof Downlighter : Supply of CEILING LED Fixture -LED 12W,LED Electronic Driver which offers Protection against Short Circuit, Over- Voltage & Over- Current, IP 66 protection,CRI 70,voltage input AC100-240V.Body-Die-casting and Extruded aluminium Body with Surface Anti-ageing electrostatic spray processing & screen. Body colour-RAL 9005 Matt ,Dimension-126mm(Dia.)x138mm(H),Weight-0.75kgs. Estimated Lifetime-L70 @ 50,000hours minimum.
Approved Make - NERI/Philips/Lighting Technologies
14
-
-
Up & Down Light
Supply of 2X10 W LED Up down light suitable for wall mounting , BISApproved
, Body made of pressure Die cast aluminium , proper heat sink should be
designed for better heat dessipation , The diffuser should be clear toughned
glass with IK08 protection . The luminaire is provided with surge protection of 4 KV . Electronic driver having power factor0.95, THD 15 % and input voltage range from 150-270V AC at 50Hz. Minimum lumen 2000 Lumens in CCT range of 3000/4000/5700 as per ANSI,LED Make CREE/Osram/Samsung with LM80 report to be submitted at the time of Supply , life of 50000 burning hours with 70% of initial lumens maintained.Ambient Operating Temperature is -10 Deg. to 50 Deg. Luminaire should Maintain Ingress Protection of IP65 for better weather proofing. Sample Should be submitted for concerned engineer incharge for approval of light fixture. Approved Make - NERI/Philips/Lighting Technologies along with all other necessary accessories.
16
-
-
Supply, laying, connection and testing of 10-12 W LED bulk head lighting with all necessary details.
2
-
-
TOTAL OF LIGHT FIXTURES
-
-
-
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.
-
-
-
Providing & Laying of HDPE Pipe 32mm PE-80,PN6 direct in ground; to be laid 75-100cm below the ground level for drawing of cables including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering,or G.I. conduit 32 mm dia( Heavy Duty) with concrete block 15cm X 15cm 1:2:4 with complete curing with splicing complete in all respect complete in all respect. Make: Jain/Dutron/Supreme/reliance
10
-
-
63 mm dia (OD-63 mm & ID-51 mm nominal)
15
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray cable tray with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.
-
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
10
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “bends “ ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.
-
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
2
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Tee” ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.
-
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
1
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Cross member” ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.
-
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
1
-
-
Supply and installtion of expanding firestop foam equivalent to Hilti CP 620 on both sides of wall, with minimum 2 hours fire rating when tested in accordance with UL 1479/ASTM-E 814, for horizontal openings in floors or slabs made of concrete/ masonry or Gypsum after passing service lines like cable trays or cables/cable bundles. The expanding foam expands seven times its volume to fill the cavity at the time of dispensing the material and shall fully cure within two minutes after dispensing. The product shall be age tested as per Dafstb and DIBT standards. The product shall provide water tightness when tested for W rating as per UL standards and shall carry test certificate for sound insualtion of 50 db when tested in accordance with ASTM E 90. The product shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96 and shall have a VOC content of approx. 1.3 g/l as per LEED 2009. The product shall be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The system shall be UL listed & classified. The system shall be UL & FM approved.
1
-
-
Supply and installatio of Acrylic Firestop Sealant equivalent to Hilti CP 606 in gaps between wall and slab made of concrete/masonary/gypsum on both sides of wall to provide minimum 2 hours fire rating when subject to the test conditions of UL 2079 standards. The product shall be age tested as per DafStb guidelines. The product shall be age tested as per Dafstb and DIBT standards.Sealant should provide sufficient MAF, water and gas tight seal. Sealant shall also provide airborne sound transmission reduction (STC of 50) and shall be tested as per DIN 52210 for sound insulation. Sealant shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96 and should have a VOC content of approx. 75 g/l as per LEED 2009. The sealant shall carry test certificate in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4.
1
-
-
TOTAL OF FIRE STOPPER & SAFETY ITEMS
-
-
-
Supply of 2 KVA (SINGLE PHASE) on line UPS system confirms to IS 16242(Part-I):2014 and IEC 60240-1 : 2008 with IGBT technology pure sine wave out put, double conversion with auto and manual static by pass switch three phase input / SINGLE phase output with minimum 15 minutes battery back up of each UPS.
Approved Makes-Eaton, Neumeric, APC
1
-
-
Design, Supply, Install, Testing of all Public Address Components and Commissioning of a Complete Public Address/Evacuation System complete with all items mentioned but not limited to below: -
-
-
-
In general the complete system design and installations shall confirm to latest IEC Standards and the specifications, drawings submitted here with.
-
-
-
Supply, Installation, Testing and Laying of 2 Core X 1.5 Sq.mm FRLS PVC insulated Shielded Copper armoured cable with all required accessories. Approved Makes- KRYSTAL/Polycab/RRcable/KEC
5
-
-
Supply, Installation, Testing and Laying of 2 Core X 1.5 Sq.mm FRLS PVC insulated Shielded Copper unarmoured cable with all required accessories. Approved Makes- KRYSTAL/Polycab/RRcable/KEC
30
-
-
Supply, installation, testing and commissioning of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
25 mm
30
-
-
Ceiling mounted Weatherproof Speaker: Supply, Installation, Testing and Commissioning of 7.5W tapping Ceiling Speaker Approved Makes- BOSE / JBL
2
-
-
Supply, Installation, Testing and Commissioning of Network based Power Amplifiers: Supply, Installation, Testing and Commissioning of 120W amplifier, and 4-16 Ohms transformer isolated, Frequency responce 60 Hz~15 kHz ( ± 3 dB ), LED status indicators, Including DC12V fan, Rated Power 120W, Require Power AC 220 V / 50 Hz, network based connections, with protection against overload, short circuit and overheat. can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection. Approved Makes- BOSCH / BOSE / ATIES / HONEYWELL
1
-
-
Supply, Installation, Testing and Commissioning of Wall mounted 9U Rack along with power sockets strips and all other require components & acceessories to mount all the equipments for satisfactory job.
Approved Makes- Rittal/Panduit/Valrack
1
-
-
Provision for connector,connection cords,cable tie etc complete as required for proper completion of work.
1
-
-
Design, Supply, Install, Testing,Commissionnig of CCTV System complete with all items mentioned but not limited to below: -
-
-
-
In general the complete system design and installations shall confirm to latest IEC guidelines and the specifications, drawings submitted here with.
-
-
-
Supply, installation, testing and commissioning of Cat6 cable. Make:- SYSTEMAX / CALIPLAST / DURANET / PANDUIT
250
-
-
Supply, Installation,testing and commissioning of 8Port POE Network Switch to provide Power and Data Communication for mentioned Camera. With 1 G SFP Module.
Approved Makes- CISCO / HP / SIEMENS / R&M / NetGear
1
-
-
Supply, installation, testing and commissioning of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
25 mm
250
-
-
Supply, Installation, Testing & Commissiong of IP MFZ BULLET CAMERA
Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Bullet Camera, 1/2.8" CMOS, 2 MP @ 25fps, Min. Illumination required 0.01 lux @ F1.4 (color), 120dB True WDR, Min. Pixels 1920 X 1080, triple stream, 2.7 -12 mm motorized focus and zoom lens, BLC, HLC, 3DNR, Privacy Mask, IR LEDs Smart IR with upto 50m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 2 In/ 1out, PoE, H.264 High Profile and MJPEG, Inbuilt analytics Trigger line/Intrusion/Loitering, PoE Class 3 and 12V DC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S & Profile G compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55022) , FCC Part 15 & RoHS compliant. Cyber Security PCI-DSS or equivalent Certified.
Approved Makes- Avtron/Honeywell/BOSCH/Hikvision
2
-
-
Supply, Installation, Testing & Commissioning of 8-channel network video recorder (NVR), Real-time recording: Up to 16 channels 1080P @ 4Mbps, Operating System LINUX, H.265, H.264 high quality decoding, RAID-0/1/5/6/10 support, motion detection, 3 USB 2.0 ports, USB storage device, 2 RJ-45 port, 1 RS-232, Hot swap, 2 bay HDDs, Support ONVIF Profile S, HTTP/HTTPS, TCP/IP, RTSP, UDP, NTP, HTTPS, DHCP, IP Search protocols can support Approved Makes- Bosch/Honeywell/Axis/Pelco
1
-
-
Hard Drive Disk: SITC of Enterprise surveilliance HDD 4 TB for 30 days storage at D1 resolultion. Approved Makes- Bosch/Honeywell/Axis/Pelco
1
-
-
Supply, Installation, Testing and Commissioning of industrial type 32" LED Display for 24x7 runningg (ON), 1920 X 1080 Resolution, 450 CD/M2 Brightness, Wall Mounting Bracket. Approved Makes- SAMSUNG / SONY / LG
2
-
-
Supply, Installation,testing and commissioning of 12U Rack along with power sockets strips and all other require components & acceessories to mount all the equipments for satisfactory job.
Approved Makes- Rittal/Panduit/Valrack/Netrack
1
-
-
Supply, Installation, Testing and Commissioning of Junction Box(570X280X215) and all other require components & acceessories to mount all the equipments for satisfactory job.
Approved Makes- 3C3/Hensel
3
-
-
Supply, Installation, Testing and Commissioning of 6 single mode fiber optic cables (9/125 µm) with all necessary accessories to comply the installation.
Approved Makes- SYSTEMAX / CALIPLAST / DURANET / PANDUIT /R&M / 3C3
250
-
-
Supply, Installation, Testing and Commissioning of 24 LC Port Loaded LIU SM with all necessary accessories to comply the installation.
Approved Makes- Honeywell / Panduit / R & M / 3C3
1
-
-
Supply, Installation, Testing and Commissioning of 12 LC Port Loaded LIU SM with all necessary accessories to comply the installation.
Approved Makes- Honeywell / Panduit / R & M / 3C3
1
-
-
Supply, Installation, Testing and Commissioning of 06 LC Port Loaded LIU SM DinRail Type with all necessary accessories to comply the installation.
Approved Makes- Honeywell / Panduit / R & M / 3C3
5
-
-
Supply, Installation, Testing and Commissioning of LC-LC SM Patch Cord 3 Mtr with all necessary accessories to comply the installation.
Approved Makes- Honeywell / Panduit / R & M / 3C3
3
-
-
Supply, Installation, Testing and Commissioning of SC-LC SM Patch Cord 3 Mtr with all necessary accessories to comply the installation.
Approved Makes- Honeywell / Panduit / R & M / 3C3
5
-
-
Supply, Installation, Testing and Commissioning of I/O User end and all necessary accessories to comply the installation. Approved Makes- Honeywell / Panduit / R & M / 3C3
2
-
-
Supply, Installation, Testing and Commissioning of Wheather Proof Back Box for CCTV(120X120X75) with all necessary accessories to comply the installation.
Approved Makes- Honeywell / Panduit / R & M / 3C3
2
-
-
Hard Drive Disk: SITC of Enterprise surveilliance HDD 8 TB for 60 days storage at D1 resolultion. Approved Makes- Bosch/Honeywell/Axis/Pelco
2
-
-
Supply, Installation, Testing and Commissioning of 1 mtr. Cat 6 Patch cord. Approved Makes- Honeywell / Simplex / Siemens / Panduit
4
-
-
Supply, Installation, Testing and Commissioning of 24 Port fully loaded patch panel Approved Makes- Honeywell / Simplex / Siemens / Panduit
1
-
-
Provision for connector,connection cords,cable tie etc complete as required for proper completion of work.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%